• Connection flange in DN 63 ISO-K; out: DN 16 ISO-KF/G ¼
• Pumping speed of up to 67 l/s for N2
• Integrated TC 110 drive electronics
• Rotor bearing: Hybrid
• For installation in any orientation

The Pfeiffer Hipace 80 Iso-K 63 is a small yet powerful turbopump with a pumping speed of up to 67 I/s for N2. It features hybrid bearing technology and integrated TC 110 drive electronics. The integrated drive electronics prevent costly cabling. The electronic drive unit automatically regulates the drive power down in the event of excessive temperatures.

The combination of a ceramic ball bearing on the fore-vacuum side and a permanently magnetic radial bearing on the high vacuum side is called a hybrid bearing. This bearing technology does not require electromagnets and has a long service life with maintenance intervals of approximately 4 years. The ball bearing and the operating fluid reservoir can be replaced on-site within less than 30 minutes.

1. Protective cover for the high vacuum connection

2. Ground terminal

3. Sealing gas connection

4. Pump housing, stainless steel

5. Turbo rotor

6. High vacuum connection

7. Fore-vacuum connection

8. Venting screw

9. Electronic drive unit - TC 110

10. Mounting surface for water cooling

11. Pump base

12. Rubber-metal bumper

13. Protective cover for the fore-vacuum connection

14. Multifunction connection “X3”

15. LED operating mode display

16. Pump housing, aluminum