Moisture Sensor, ATEX, Mineral Oils, G1/4 BSPP, M12 5-way connector

• Temperature Outputs on all versions.
• Continuous, online moisture indication, for hydraulic and lubricating systems.

MS moisture sensors provide fast, reliable and accurate inline detection of moisture in fluids. Technology developed for preventative maintenance programmes. MS200 is the ‘Programmable’ sensor monitoring and reporting relative humidity (RH), moisture content in oils. MS300 ‘Intrinsically safe’ sensor ATEX certified for use in hazardous Zone 0 environments.

• Ground support vehicles
• Pulp and paper plants
• Marine hydraulics
• Power transmission & distribution
• Forestry
• Industrial hydraulics
• Earth moving applications
• Agricultural
• Hazardous Areas (Zone II)
• Simulators

Parker’s Moisture Sensor Range offers fast, reliable and accurate in-line detection of moisture in fluids. The MS transducer type technology has been especially designed with the preventative maintenance programme environment in mind.

The industry accepted sensing cell device will monitor and report Relative Humidity (RH), moisture content in oils. The water content measurement technique offers the end user benefits over the current standard form of water content reporting (PPM).

This allows for real time preventative maintenance to be undertaken and corrective actions to be made. By knowing that the water contamination is still within the oils absorbing range, less than 100%, reclaiming fluid properties before additive damage occurs can initiate calculable cost savings.