The PanaVise 570 positive adjustable stop is an accessory for use with the PanaVise precision PanaPress (sold separately and required for use), that provides a dual level of control over the downward thrust of the PanaPress ram element. Limiting this movement, and with it the 1/4 ton of possible pressure that the PanaPress can bring to bear, is important when crimping cables and wires and performing other precision tasks in order to reduce the chance of damaging items. The PanaVise 570 is a solid metal collar that slips over the top end of the ram element of the PanaPress and physically limits its possible range of downward movement. Jobs requiring only coarse adjustment utilize a front oriented screw that is turned by hand into the front facing surface of the ram of the PanaPress. More precise movements of the PanaPress ram can be achieved using an inverted rear oriented screw that contacts the upper edge of the PanaPress frame. With this users can fine tune the ram's motion, using a side oriented screw to secure the fine tuning and then tightening the front screw to lock in a final position, limiting the ram to a consistent range of motion.

In Use Example for the PanaPress Posi-Stop

Model 570 PanaPress Posi-Stop close-up. The screw on the front is used for moving the Posi-Stop up and down in gross adjustments	Model 570 PanaPress Posi-Stop side view. Notice how the screw head is contacting the 502 PanaPress casting near the ram teeth. This is what controls the downward travel.