Pace MBT 350 Multi-Channel Rework System with SX-100 Desoldering Iron, TD-100A Iron and MT-100 Tweezer
Advanced Technology and Programmability
The MBT 350 is loaded with features to improve quality, increase through-put, extend tip life, and protect your process. The system is fully programmable and can be password protected from unauthorized changes. In some cases technicians become frustrated with being locked into a single temperature.
The MBT 350 provides the solution! An approved operating range can be programmed allowing operators the flexibility to do their work, while eliminating the risks associated with giving techs access to the entire temperature range of the system. Operators can be given a range of 100-900ºF (37-482ºC) for SensaTemp handpieces and 400-850ºF for THC handpieces to operate within! When high-mass tips are required, an offset can be programmed for each of the three channels, individually.
![MBT-350-with-new-TD-100A-handpiece]()
|
- Three channel rework system
- Soldering, desoldering, and hot air functionality
- Programmable, digital controls
- Compatible with 8 IntelliHeat handpieces
- All three channels can be used simultaneously, and at different temperatures
|
Soldering, Desoldering & Rework of Through-Hole/Surface Mount PCB's
PACE's MBT 350 is a self contained, 3 channel rework station that offers high capacity, low temperature SMT/Thru-Hole soldering, desoldering and repair. The unit features three individually powered and controlled handpiece channels, providing the capability to run 3 different IntelliHeat handpieces simultaneously, and at different temperatures!
The MBT-350 includes TD-100A ThermoDrive Soldering Iron, SX-100 Sodr-X-Tractor Desoldering Handpiece and MT-100 MiniTweez Handpiece (IntelliHeat versions) along with associated Tip & Tool Stands.
The
TD-100A Ergonomic Soldering Iron uses a patented Tip-Heater Cartridge which can be changed in seconds without tools, and most tips heat up within 10 seconds flat! Performance/responsiveness is exceptional, perfect for the most demanding Lead-Free or multilayer soldering. Yet it can also handle the most delicate flexible printed circuits. Over 100 soldering tip geometries are available as well as over 30 surface mount removal tips.
Ideal for both through-hole and surface mount desoldering, the clog-free
SX-100 Sodr-X-Tractor is the best performing solder extractionSX-100 Desoldering Handpiece tool on the market today. The handpiece can be used with a disposable Sodr/Flux-Trap paper solder collection chamber or re-cleanable Glass Chamber. When the filter is full, just pull out the chamber, pop out the old filter and replace with a new one - all within 15 seconds! The heater's laser-trimmed, Platinum RTD Temperature Sensor is 5 times more accurate than conventional thermocouples.
Finally, the
MT-100 MiniTweez High Capacity Micro Tweezer is perfect for one-handed removal of chips (including 0201's), SOIC's and other surface mounted devices. Like the TD-100, the MT-100 uses Tip-Heater Cartridges which can be changed in seconds without tools, and most tips heat up within 10 seconds.
The 8007-0454 is compatible with all eight IntelliHeat handpieces. These can be viewed through the links below:
- SX-100 Sodr-X-Tractor desoldering iron
- TD-100A ThermoDrive tip heater cartridge soldering iron
- MT-100 MiniTweez tweezer
- TJ-70 ThermoJet hot air handpiece
- PS-90 high capacity soldering iron
- TP-100 ThermoPik
- TT-65 ThermoTweez tweezer
- TJ-85 ThermoJet hot air pencil