• Source and Read Four T/C Types plus mV J, K, T & E: -13.000 to 80.000 mV
• Calibrate with Confidence Resolution to 0.1 °F & °C; Accurate to 0.2°
• Faster Calibrations Instantly select three outputs with EZ-CHECK switch Easily find trip points with two-speed EZ-DIAL knob & Automatic Stepping

PIECAL Calibrators are designed and built by members of the same team that designed and built the calibrators manufactured by Fluke under the Altek label.

The PIE 322 gives you the advantages of an updated design while maintaining the familiar, time-proven ease of use of similar calibrators. Choose the PIECAL 322 and get a thermocouple calibrator with a backlit display, a rubber boot, and rugged switches with the same high accuracy.

The PIE 322-1 Four Thermocouple Type Calibrator is functionally equivalent to similar calibrators with five-digit displays, knobs, and switches.

Simulating or reading thermocouples requires the use of thermocouple or extension grade thermocouple wire. Plug thermocouple wires into the miniature thermocouple jack or place bare thermocouple wires onto the brass block under the screws.

The PIECAL 322 has two banana jacks mounted in the top end of the housing. These are not temperature compensated and are to be used only for millivolt signals.