Oakton WD-35462-10 - Waterproof EcoTestr TDS Low Tester
Simply dip and read the orientation of the display means no need to turn your head or tilt the tester. This low-cost meter is perfect for most applications. The single-junction electrode is recessed to protect against breakage. The unit offers up to three-point calibration with auto-buffer recognition for quick calibrations, automatic temperature compensation for accurate reading under changing conditions, hold function to lock measure value, and auto-off to prolong battery life.
The Oakton 35462-10 EcoTestr TDS Low is a handheld, waterproof, and dustproof pocket meter that measures TDS and floats, if dropped in liquids. A portable pocket meter is commonly used to measure the TDS of substance in aquaculture, aquariums, fish ponds, food processing, swimming pools and in environmental treatment. This meter has ATC for accurate readings in fluctuating temperatures, and push-button calibration for a wide range of results. It features a transparent, protective cap to reduce contamination and protect the sensor. The cap keeps the sensor moist when stored upright, and can be used as a container for sensor-conditioning, or on-site calibration. The meter?s waterproof and dustproof housing has IP67-rating for protection against solid objects or liquids. Its stainless steel sensor tip is both durable and chemical resistant. The meter has a large, upright, single-line LCD screen for ease of viewing, a hold function which freezes readings for recording, and an auto shut-off to extend the life of the batteries. It has a click-lock battery cover for battery access to replace batteries without tools.
The 35462-10 pocket meter comes with an integral stainless steel sensor, has ATC from 0 to 50 degrees C (32 to 122 degrees F), and operating temperature of 0 to 50 degrees C (32 to 122 degrees F). TDS factor is adjustable 0.4 to 1.0. TDS range is 0 to 1990 ppm, resolution 10 ppm, accuracy + or - 1% full-scale. Its dimensions are 1.25 (l) x 1.5 (w) x 6.5 (h) inches (3.2 x 3.8 x 16.8 cm) and it weighs 3.25 ounces. The testr works with four 1.5 V alkaline batteries (not included) for up to 500 hours of continuous use (Eveready A76 or LR44 replacements).
TDS such as salts and minerals contribute to the conductivity of a solution. A TDS meter measures conductivity of a substance and converts it to a TDS reading. TDS readings are commonly used by researchers, manufacturers, and hobbyists in aquaculture, agriculture, hydroponics and water-testing and for scientific applications.