Oakton WD-08439-74 - Low-Cost Surface Thermocouple Probe, Type T

The Oakton Surface probes offer dual spring tips to provide positive contact with flat or slightly irregular surfaces. Include a 5-ft PVC coiled cord with strain relief that protects from repeated flexing and tugging. Ergonomic, easy-grip 5"L glass-filled nylon handle (unless noted below) provides maximum heat insulation and impact resistance. Finger stops on handle prevent probe from rolling and fingers from sliding when inserting probe into hard materials. The 316 stainless steel sheath (shaft casing) provides durability, strength, and maximum abrasion resistance. Rugged thermoset plastic miniconnector is compatible with all Oakton and Acorn thermocouple thermometers. Temperature Range: Range:-418 to 700°F (-250 to 371°C); Junction: exposed; isolated; Response time: 30 sec; Dimension: 4.5" Tip Length; 0.63" diameter. These probes feature a rugged thermoset plastic mini connector and are compatible with all Oakton Digi-Sense and Acorn thermocouple thermometers. Connectors and cord are color-coded based on thermocouple type: type T blue.
 

Surface Probes

Thermocouple Probe Junction Types

Sheaths with small diameters have faster response times; sheaths with larger diameters have longer life and are better for measuring higher temperatures.

Probe Shealth/Body Materials

Inconel® 600 Sheath is ideal for severely corrosive environments and elevated temperatures. Resists progressive oxidation. Maximum operating temperature: 1148°C (2100°F) continuous; 1371°C (2500°F) intermittent.

304 SS Sheath is for general-purpose use, is corrosion-resistant, and good for food service and biological applications. Maximum operating temperature: 898°C (1650°F) continuous; 1398°C (2550°F) intermittent.

316 SS Sheath has higher corrosion resistance than 304 SS. Withstands some strong acids. Maximum operating temperature: 898°C (1650°F) continuous; 1371°C (2500°F) intermittent.

SS Sheath with Coating of PTFE or PFA with grounded junction is ideal with corrosive liquids and atmospheres. Longer response time. Temperatures to 260°C (500°F).

Polymer Body Probes are available in a variety of polmyers including Kapton® and PTFE. These provide excellent flexibility and often good chemical resistance. Be sure to consult a chemical compatibility table when selecting a probe for your application.
 

Physical Characteristics of Thermocouples

General Considerations

Extend Your Thermocouples up to 2000 feet without signal loss. Extension wire must be the same type as the thermocouple.

System Error becomes important when you select a probe and meter to make a complete temperature measurement system. For example: a meter has an accuracy of ±0.7°F; probe error for the type T probe with metal sheath, straight cable, and stripped ends will have an error limit of ±1.8°F at 400°F. Therefore, the probe-meter system accuracy will be (±0.7) + (±1.8) = ±2.5°F at 400°F.

NIST traceability is required for many applications. In order to make an item traceable to NIST standards, the item and the standard are exposed to the same conditions, the readings are noted, and the difference between the readings is recorded on a NIST-traceable calibration report. When taking future readings with the item, the value on the report must be added or subtracted from the measured value.

A,B,C Standard Surface Probes feature ceramic tips to ensure excellent thermal contact.

D Flat-leaf Probe facilitates insertion into openings.

E Adhesive Probes make it easy to monitor surface temperatures over time.