NETALLY ACKG2-LRAT2000 - Network Tech Perp Troubleshooting Kit

• Test the most common Wi-Fi standards (including 802.11ax) with a rugged, handheld, purpose-built wireless tester
• See all networks and devices in your location immediately upon power up
• Results saved on the tester or uploaded to the Link-Live Cloud Service with zero-touch
• Results, project and staff management using the Link-Live Cloud Service
• Packet reflection at rates up to 1 Gbps

The AirCheck G2 Wireless Tester's intuitive user interface provides actionable intelligence, simplifying wireless troubleshooting and validation. AirCheck G2 provides network professionals and technicians of any skill level with complete and accurate information to resolve connectivity and performance problems quickly, speed up closure of trouble tickets, and ensure your Wi-Fi network meets end users' needs.

AutoTest

AirCheck G2 performs the following five essential Wi-Fi tests and provides a pass/fail indication of the wireless environment, as well as identifies common problems - for any level of expertise:

• 802.11 Utilization - Reports channels in each band (2.4 GHz and 5 GHz) with the highest airtime utilization. (Figure 1)
• Non-802.11 Utilization - Reports channels with the highest non-802.11 airtime utilization, indicative of interference sources and high noise levels.
• Co-Channel Interference - Reports channels with the most APs on the same channel that exceed the minimum signal level threshold.

• Adjacent Channel Interference - Reports interference on a channel caused by APs that are operating on other channels that overlap with that channel.
• Network Quality - Verifies coverage, interference, security and ability to connect to specified networks, along with the availability of critical network services such as DHCP and connectivity to specified network targets. (Figure 2)
• Rogue Access Points - Reports APs other than your authorized devices. These devices may be compromising network security.

Access Point Discovery

Quickly view all the APs present in the environment and see critical parameters for each one, including signal level, signal/noise ratio, security type, and channel. Find common issues, such as incorrect security type, poor signal coverage, or incorrect channel. (Figure 3)

Sort or filter by any parameter, then drill into any AP to set its authorization level and see more details, including number of connected clients, supported rates, 802.11n/ac/ax capabilities and more. From the AP details page, drill into a list of connected clients, or the channel on which the AP operates, to verify any channel utilization or co-channel interference problems. From here you can also use a locator tool to find an AP, set Access Control status (ACL), or you can perform a packet capture.

Network Discovery

Quickly view all the networks present in the environment and see critical parameters for each one, including signal level, signal/noise ratio, security type, and number of access points. Find common issues such as mixed security types, poor signal coverage, or lack of secondary AP coverage.

Sort or filter by any parameter, then drill into greater detail on any network, including 802.11 types supported, number of connected clients, channels, and more. From the network details page, drill into a list of APs or clients on the network.

The LinkRunner AT Network Auto-Tester is the quickest and most complete copper and fiber cable network connectivity tester. This rugged, handheld network connectivity tester speeds troubleshooting and reporting with a comprehensive one-button AutoTest and zero-touch Link-Live cloud reporting. The LinkRunner AT Network Auto-Tester performs your required set of network connectivity tests in 10 seconds, enabling you to quickly and accurately identify and solve network connectivity problems. Cloud reporting automatically uploads network connectivity test results to the Link-Live Cloud Service for reporting and project management.

LinkRunner AT Features

Get Answers Fast

With a three second startup and a user-defined AutoTest that performs your required set of connectivity tests in seconds, the LinkRunner AT network tester enables you to quickly and accurately identify and solve network problems.

• PoE (copper only) class power over Ethernet tester
• Link speed and duplex (actual and advertised)
• RX pair, polarity and signal level
• 802.1x authentication
• Nearest switch name, port, VLAN, model and IP address
• DHCP Auto-negotiation with subnet and DHCP server addresses
• IPv4 and IPv6 addresses
• Gateway and DNS server availability and responsiveness
• Ping or TCP port connectivity tests to 10 user-defined targets

Discover Nearest Switch and VLAN

The LinkRunner AT uses the IEEE Link Layer Discovery Protocol (LLDP) plus the Cisco and Extreme Discovery Protocols (CDP and EDP) to display the VLAN and nearest switch model, slot, and port.

The LinkRunner AT displays critical nearest switch information including:

• Switch name and model
• IP address
• Chassis, slot and port
• VLAN IDs
• Duplex and speed (actual and advertised)
• Signal Strength
• Connection (MDI or MDI/X)
• PoE voltage and power (actual and test limit)
• Graphical representation of power on pairs

TruePower™ PoE Testing - Power Over Ethernet Testing

You can quickly validate PoE performance by drawing actual power up to the 802.3at standard 25.5W. Load the circuit to stress switches, cabling and patch panels, all while measuring the voltage and pairs being used. The ability to validate the TruePower delivery before installing cameras, APs and phones ensures smooth deployment.

Automated Test Results Management

Serving as a centralized test results and device management system, the free Link-Live cloud service transforms team workflows with the ability to quickly and easily log, document, and report test activity from all LinkSprinter, LinkRunner AT, LinkRunner G2, AirCheck G2, and OneTouch AT hand-held network testers. Once the instrument is connected to the Link-Live Cloud Service, your test results are automatically uploaded to the dashboard for project management and reporting. You have the option of uploading additional files, screenshots, images, profiles, packet captures, location information, and comments anytime. Also, certain NetAlly instruments with AllyCare Support can receive firmware updates "over the network" from Link Live as they become available.

An API is available to retrieve and integrate data from Link-Live into other management platforms, such as your trouble ticket application or network management system. This gives you the ability to easily provide proof-of-performance and better manage jobs and staff efficiency.

This unified dashboard of both wired and Wi-Fi network connectivity results enables you to:

• Reduce results management overhead for multiple testers and users
• Enables seamless collaboration between site personnel and remote experts
• Simplify report generation across media types for network deployment documentation
• Attach photos, user comments to each result, adding context for future changes and troubleshooting
• For asset management, ability to associate serial numbers of installed devices, and/or cable/wall jack label to specific test results