NetAlly EXG-200-KIT (EtherScope nXG)

The EtherScope nXG Portable Network Expert is a multi-technology, all-in-one handheld network tester that enables engineers and technicians to get more done faster, from deployment to maintenance and documentation of their ever-changing Wi-Fi and Ethernet access networks. With its simple operation, yet in-depth visibility, and the ability to remotely access and control EtherScope nXG, engineers can now fully enable and leverage the "local hands" of field technicians to expedite problem-solving.

All-in-one to address new technology upgrades

An Android-based handheld network tester that verifies, discovers and troubleshoots Wi-Fi and Ethernet network infrastructures

• Native 4×4 Wi-Fi that supports:
  • 802.11a/b/g/n/ac (wave 2) Wi-Fi network connectivity
  • Wi-Fi 6 network visibility
  • Analysis of SSIDs, BSSIDs, channel, client devices, and interference sources
• Ethernet port supports:
  • 10/100/1000Mbps to 2.5/5/10G
  • Verifies loaded power from 90W PoE switch

Built-in Bluetooth v5/BLE and USB interfaces to discover and configure nearby device

Auditing and documenting network security and health

Discover network devices across multiple VLANs and Wi-Fi SSIDs through four Wi-Fi and Ethernet interfaces upon power up

Powerful filter and sort function with automatic problem detection identifies issues such as:

• Duplicate IPs
• Congested switch ports
• Oversubscribed Wi-Fi channels/SSIDs
• Security issues, such as unknown switches, access points with open authentication and unencrypted APs

Path Analysis shows the switch/router path to any connected device

10G copper/fiber wired and Wi-Fi performance tests for critical links and key devices

Simultaneously generate and measure up to four streams of IP-based traffic through the Ethernet test port to:

• Load the network with up to full 10G line-rate traffic
• Test for packet loss, delay, and jitter

Supports popular iPerf network throughout testing for Wi-Fi and Wired networks

Simplifies tasks and empowers technicians to verify complex networks with next generation AutoTest

• Out-of-the-box AutoTest profiles for Wi-Fi and wired networks that can be customized for your network
• Execute multiple AutoTest profiles that shorten test time to verify multiple VLANs and Wi-Fi SSIDs
• Define and assign groups of targets to AutoTest profiles to verify performance using ping, TCP Connect, Web, or FTP
• Packet capture from Wi-Fi and Ethernet to PCAP file

Automated test results management

• Complimentary Link-Live Cloud Service stores test result and site data upload for automated reporting and documentation
• Available API enables seamless data integration between Link-Live and trouble-ticket or network management systems

NetAlly LR10G-100 (LinkRunner 10G)

• Install, test, verify, and troubleshoot technology upgrades, Multi-Gig (NBASE-T) and 10G networks with advanced AndroidTM-based troubleshooting apps and purposebuilt test hardware
• Physical layer testing includes cable (TDR) testing, toning, wiremapping, and cable SNR (Signal-to-Noise Ratio) for Multi-Gig links
• Compatibility with standards compliant SFPs enables test and validation of any wired media (copper or fiber) for a variety of use models
• Validate up to 90W 802.3bt PSE with TruePower™ loaded Power over Ethernet (PoE) test 
• Serves as a peer to the EtherScope™ nXG for line-rate performance testing to verify network capacity, performance and QoS, as well as service provider SLAs between sites

Introducing the new LinkRunner 10G, the most cost-effective solution for 10 Gig network testing. LinkRunner 10G simplifies testing and configuration of copper and fiber Ethernet networks, streamlining workflows by combining essential functions of installation and triage in a single, ruggedized unit.

This next-generation Android-based tester delivers complete network validation and troubleshooting, from the media (copper/fiber) to the application (layers 1 – 7), accelerating deployments, speeding problem identification, and improving the efficiency and effectiveness of network installers and operations teams.

Flexible Platform for a Variety of Testing Needs

The LinkRunner 10G has two Ethernet ports. The main test RJ-45 port supports Multi-Gig networks from 10/100/1000Mbps to 2.5/5/10G to verify link speed, SNR, and duplex advertised and connected. It can request and verify PoE power under load from up to 90W PSE’s. Alternatively, it can interface to fiber networks via single/multi-mode SFP+ to test 1/10Gbps fiber-based Ethernet. The second RJ-45 management port connects to 10/100/1000Mbps Ethernet for remote control, and conducts network scanning and tests where needed. It is also the port for cable testing.

In addition to fiber optic transceivers (SX, LX, SR, LR, ZX, singlemode, multimode, etc.) the SFP+ slot can be utilized with a variety of standards-based interfaces, such as TwinAx or other Direct Attach Copper (DAC) cables, and vendor-specific transceivers.

As an Android-based device, LinkRunner 10G can use a variety of apps from the Link-Live app store for a variety of uses. The USB-A port provides connectivity for added USB adapters and third-party accessories such as printers, barcode scanners, fiber optic inspection cameras, and more. The use of a USB-based Wi-Fi adapter (such as the Edimax AC1200 for 802.11ac/b/g/n/) provides for connectivity and wireless testing using a third-party app.

Multi-Gig Link Validation

With the expanding deployment of Multi-Gig switching (typically to feed greater bandwidth to Wi-Fi 6 access points), users are finding that their cable plant may not support the desired speed. Cable quality, length, installation workmanship, and noise in the environment all can contribute to “downshifting” to lower-than-expected speeds.

Cabling SNR Measurement - EtherScope nXG can now verify copper media for Multi-Gig capability (1 / 2.5 / 5 / 10Gig), and provide root cause diagnosis when link speed downshifting occurs.

Automated Test Results Management

Serving as a centralized test results and device management system, the free Link-Live cloud service transforms team workflows with the ability to quickly and easily log, document, and report test activity from all LinkSprinter®, LinkRunner AT, LinkRunner G2, LinkRunner 10G, AirCheck™ G2, and OneTouch™ AT hand-held network testers.

Once the instrument is connected to the Link-Live Cloud service, your test results are automatically uploaded to the dashboard for project management and reporting. You have the option of uploading additional files, screenshots, images, profiles, packet captures, location information, and comments anytime. Also, certain NetAlly instruments with AllyCare Support can receive firmware updates “over the network” from Link-Live as they become available.

An API is available to retrieve and integrate data from Link-Live into other management platforms, such as your trouble-ticket application or network management system. This gives you the ability to easily provide proof-ofperformance and better manage jobs and staff efficiency.

This unified dashboard of both wired and Wi-Fi network connectivity results enables you to:

• Reduce results management overhead for multiple testers and users
• Enables seamless collaboration between site personnel and remote experts
• Attach photos, user comments to each result, adding context for future changes and troubleshooting
• For asset management, ability to associate serial numbers of installed devices, and/or cable/walljack label to specific test results