Resistivity Digital Monitor/Controller, 0 - 20 MΩ, 115VAC Power Cord, Panel Mounted Set Point Adjustment
The Myron L 753II-11-PC-SFP is a digital resistivity monitor/controller configured with a range of 0-20 MΩ, panel mounted set point adjustment, a 115VAC, 8-ft power cord with plug and strain relief. Please note, the sensors are sold separately.
The unique circuitry of the Myron L 750 Series II Resistivity Monitor/controllers guarantees accurate and reliable measurements. Drift-free performance is assured by field-proven electronics, including automatic DC offset compensation and highly accurate drive voltage. Since temperature compensation is at the heart of accurate water measurement, all Myron L® Monitor/controllers feature a highly refined and precise TC circuit. This feature perfectly matches the water temperature coefficient as it changes. All models were corrected to 25°C. The TC may be disabled to conform with USP requirements.
Built-in electronic calibration allows for fast quality checks without standard solutions. (Note: for maximum system accuracy standard solutions are recommended). A push-to-test button makes setpoint checks easy, while the internal alarm set discourages unauthorized adjustments.
Standard on all controller models is a heavy-duty 10-amp output relay, operating on either increasing or decreasing readings. Bright green/red LEDs indicate above or below setpoint readings.
All 750 Series II models feature an IP65/ NEMA 4X water-resistant and corrosion-proof rated enclosure. Compact in size at 152 x 122 mm/6 x 4.8 in., they are suitable for panel, bench, or surface mounting.
Applications
- Deionization (Dl) and distillation ultrapure water treatment systems
- Electronics
- Pharmaceuticals
- Laboratories
- Food Processing
- Plating
- Power Plants
- Boiler Condensate
- Process Control
Resistivity Sensors
All 750 Series II Resistivity models require a CS10 series sensor. This reliable sensor features two integral thermistors to ensure accurate and rapid automatic temperature compensation. The sturdy polypropylene standard bushing is modular for an easy, inexpensive replacement. A PVDF or 316 stainless steel bushing can also be ordered. The metal portion is available in either 316 stainless steel (standard) or titanium.