Monarch RLS24-P Rugged Laser Sensor

• Removable 3 meter cable
• Water tight M12 connector to 1/8" phone plug connector
• Mounting bracket with jam nuts
• 12 inches of T-5 tape (10-24Vdc input power)

Monarch has taken its hugely popular Remote Optical Laser Sensor (ROLS) and packaged it in a Rugged 316L SS IP67 rated enclosure. Although optical speed sensors require atmospheres that are clean and free of mist, steam, dirt, oil and other contaminants to function properly there are times when contamination can occur accidentally. Monarch's Rugged Laser Sensor will survive these unintended episodes. Simply clean off the laser and detector windows and your up and running again. The RLS utilizes a watertight M12 connector that facilitates easy removal for cleaning. With an operating range of up to 25 feet, the RLS can be used in applications where close proximity isn’t convenient or safe. The laser light source makes setup incredibly easy. Simply aim the laser at a reflective tape or high contrast target and you’re ready to start measuring. The sensor has an on-target Indicator built-in to confirm that the sensor is detecting the target.  The RLS is supplied with a 3-meter cable with a choice of tinned flying leads or 1/8” phone plug connector for use with all of Monarch's portable tachometers and stroboscopes. You can also extend the cable length by adding the 25-foot extension cable(s).

Available in 4 variations:

Model RLS-W: Rugged Laser Sensor with removable 3-meter cable, watertight M12 connector to tinned leads, mounting bracket with jam nuts and 12 inches of T-5 tape (4-15Vdc input power).

Model RLS24-W: Rugged Laser Sensor with removable 3-meter cable, watertight M12 connector to tinned leads, mounting bracket with jam nuts and 12 inches of T-5 tape (10-24Vdc input power).

Model RLS-P: Rugged Laser Sensor with removable 3-meter cable, watertight M12 connector to 1/8" phone plug connector, mounting bracket with jam nuts and 12 inches of T-5 tape (3-15Vdc input power).

Model RLS24-P: Rugged Laser Sensor with removable 3-meter cable, watertight M12 connector to 1/8" phone plug connector, mounting bracket with jam nuts and 12 inches of T-5 tape (10-24Vdc input power).

Compatibility