Display |
LCD display with 6 numeric 0.506 inch (12.85mm) high digits and 5 alphanumeric 0.282inch (7.11mm) high digits |
Indicators |
Battery level, On Target, Select, TACH, and EXT icons |
Memory |
Last setting before power down is remembered and restored on next power up. 5 user settable memory locations |
Flash Duration |
Adjustable 0.5 to 2500 microseconds or .1 to 18 degrees of rotation (auto adjusts with flash rate) |
Safety |
This product is designed to be safe for indoor use under the following conditions (per IEC61010-1) |
Compliance |
CE EN61326-1:2006 EMC 2004/108/EC |
Operating Temp |
32-104°F (0-40°C) |
Humidity |
Maximum relative humidity 80% for temperature up to 88°F (31°C) decreasing linearly to 50% RH at 104°F (40°C) |
Input Power |
Battery powered: Internal Li-Ion rechargeable batteries 3.6Vdc |
Light Source |
7 LED Array |
Light Output |
Average: 1800 Lumens at 6000 FPM 8” from lens |
Color Temp |
5600°K |
Run Time |
5 hours typical at 6000 FPM, and 2.8° pulse width with fully charged batteries |
Charge Time |
4-5 hours typical with supplied charger |
Weight |
0.6 lbs (0.27kg) including batteries |
Dimensions |
7.75" x 2.75" x 2.3" (197 x 70 x 58 mm) |
Internal Mode |
Flash Range |
30-300,000 FPM (Flashes per minute) 0.5 to 5000Hz |
Flash Rate Accuracy |
0.005% of setting or ± last digit |
Flash Rate Resolution |
0.01 to 1 FPM (menu selectable), 0.1 FPM resolution above 9,999.99 FPM, 1 FPM resolution above 99,999.9 |
External Modes |
Flash Range |
0-300,000 FPM (Flashes per minute) 0.5 to 5000Hz |
Tachometer Mode |
30 to 300,000 RPM |
Accuracy |
±0.005% of reading or ± last digit |
Display Update Rate |
0.5 second typical above 120 RPM |
Trigger to Flash Delay |
~15 µsec |
External Input |
2.5V to 12V peak pulse 500 nanosec min pulse width, positive or negative edge triggered (menu selectable) |
Display Update Rate |
Instantaneous |
Output Pulse |
3V pulse. One pulse per flash in internal mode. Mimics input pulse in external mode |
Time Base |
Ultra Stable Crystal Oscillator |