Mitutoyo Standards for Screw Thread Micrometers
The Mitutoyo micrometer standards ensure your screw thread micrometers are zero set with precision to better ensure your measurements are accurate and repeatable. The Mitutoyo screw thread micrometer standards are built with the same precision as Mitutoyo micrometers to reliably set the zero point on screw thread micrometers. The standard’s measuring faces are exceptionally flat and lapped for precise, repeatable measurements over time. The handle is heat insulated to prevent expansion due to body temperature.
Mitutoyo Standards for Screw Thread Micrometers:
- Accurately set screw thread micrometers at the start or end of measuring range
- Available in Metric lengths from 25mm to 275mm
- Available in Inch lengths from 1in to 6in
- Supplied in a fitted carton for standards up to 500mm/20in length
| Order No. | Length | Thread Degree | Accuracy |
| 167-261 | 25mm | 60° | +/- 4µm |
| 167-272 | 25mm | 55° | +/- 4µm |
| 167-262 | 50mm | 60° | +/- 5µm |
| 167-273 | 50mm | 55° | +/- 5µm |
| 167-263 | 75mm | 60° | +/- 6µm |
| 167-274 | 75mm | 55° | +/- 6µm |
| 167-264 | 100mm | 60° | +/- 7µm |
| 167-275 | 100mm | 55° | +/- 7µm |
| 167-265 | 125mm | 60° | +/- 8µm |
| 167-276 | 125mm | 55° | +/- 8µm |
| 167-266 | 150mm | 60° | +/- 9µm |
| 167-277 | 150mm | 55° | +/- 9µm |
| 167-267 | 175mm | 60° | +/- 10µm |
| 167-278 | 175mm | 55° | +/- 10µm |
| 167-268 | 200mm | 60° | +/- 11µm |
| 167-279 | 200mm | 55° | +/- 11µm |
| 167-269 | 225mm | 60° | +/- 12µm |
| 167-280 | 225mm | 55° | +/- 12µm |
| 167-270 | 250mm | 60° | +/- 13µm |
| 167-281 | 250mm | 55° | +/- 13µm |
| 167-271 | 275mm | 60° | +/- 14µm |
| 167-282 | 275mm | 55° | +/- 14µm |
|
|
|
|
| 167-294 | 1in | 60° | +/- 0.00015in |
| 167-283 | 1in | 55° | +/- 0.00015in |
| 167-295 | 2in | 60° | +/- 0.0002in |
| 167-284 | 2in | 55° | +/- 0.0002in |
| 167-296 | 3in | 60° | +/- 0.00025in |
| 167-285 | 3in | 55° | +/- 0.00025in |
| 167-297 | 4in | 60° | +/- 0.0003in |
| 167-286 | 4in | 55° | +/- 0.0003in |
| 167-298 | 5in | 60° | +/- 0.00035in |
| 167-287 | 5in | 55° | +/- 0.00035in |
| 167-299 | 6in | 60° | +/- 0.0004in |
| 167-288 | 6in | 55° | +/- 0.0004in |