Mecmesin ETS 3 - Enhanced Torque Sensor for HelixaPro and VortexPro, 3 N.m

Name: Mecmesin ETS 3 - Enhanced Torque Sensor for HelixaPro and VortexPro, 3 N.m
Brand: Mecmesin
SKU: MecmesinETS 3
Price: 3051.00 USD
Availability: InStock

0 reviews | Model: Mecmesin ETS 3

Mecmesin ETS 3 - Photo for illustrative purposes only

Compare

ETS Torque Cell ETS 3N.m

Interchangeable Enhanced Torque Sensor (ETS)
For use with HelixaPro and VortexPro test systems
Capacity: 3 N.m / 30 kgf.cm / 26 lbf.in
Accuracy: ±0.5% of the sensor capacity
3/8-inch male square drive for connection to grips and test fixtures
Sensor plugs into the test frame - calibration characteristics are immediately recognized

View Product Details

Your Price: $3,051.00

In Stock:

View Payment Options

Request Quote

Items in This Series



Product	Mecmesin ETS 3 ETS Torque Cell ETS 3N.m	Mecmesin ETS 0.1 ETS Torque Cell ETS 0.1 N.m	Mecmesin ETS 0.2 ETS Torque Cell ETS 0.2 N.m	Mecmesin ETS 0.3 ETS Torque Cell ETS 0.3N.m	Mecmesin ETS 1.5 ETS Torque Cell ETS 1.5N.m	Mecmesin ETS 10 ETS Torque Cell ETS 10N.m	Mecmesin ETS 6 ETS Torque Cell ETS 6N.m
Price
In Stock
Engineering Units (Torque)	lbFin, Nm, Other	lbFin, Nm, Other	lbFin, Nm, Other	lbFin, Nm, Other	lbFin, Nm, Other	lbFin, Nm, Other	lbFin, Nm, Other
Accuracy	±0.5% of the sensor capacity	±0.5% of sensor capacity	±0.5% of the sensor capacity	±0.5% of the sensor capacity	±0.5% of the sensor capacity	±0.5% of the sensor capacity	±0.5% of the sensor capacity
Compare	Add to compare	Add to compare	Add to compare	Add to compare	Add to compare	Add to compare	Add to compare

Recommended for you

Mecmesin ETS 3

Interchangeable Enhanced Torque Sensor (ETS)
For use with HelixaPro and VortexPro test systems
Capacity: 3 N.m / 30 kgf.cm / 26 lbf.in
Accuracy: ±0.5% of the sensor capacity
3/8-inch male square drive for connection to grips and test fixtures

Enhanced Torque Sensor for HelixaPro and VortexPro, 3 N.m

The Mecmesin Enhanced Torque Sensors (ETS) range of interchangeable torque sensors is specially adapted to the HelixaPro and VortexPro test systems. This model, the ETS 3, has a capacity of 3 N.m / 30 kgf.cm / 26 lbf.in.

The ETS torque sensors plug into the frame of the precision torque tester and their calibration characteristics are immediately recognized by the software without any input from the operator.

Sensor Capacity, Range, and Accuracy

There are eight different sensors available to ensure you have the optimum selection to meet your torque testing needs. All sensors measure from zero to its full nominal capacity (listed in the table below). They have outstanding measurement accuracy at ±0.5% of the sensor capacity.

Model:	ETS 0.1*	ETS 0.2*	ETS 0.3	ETS 1	ETS 1.5	ETS 3	ETS 6	ETS 10**
N.m:	0.1	0.2	0.3	1	1.5	3	6	10
kgf.cm:	1	2	3	10	15	30	60	100
lbf.in	0.9	1.8	2.7	9	13	26	50	90

*Not recommended for VortexPro

**Not recommended for HelixaPro

A range of grips, fixing tables and chucks is available to hold your specimens (sold separately). Connection to each ETS sensor is via a 3/8-inch male square drive (ETS 0.3 - 10) or via a 1/4-inch female hexagonal drive (ETS 0.1 - 0.2).