Overview
The MultiTest-dV is a superior motorized force tester offering outstanding value. Designed for precision-controlled compression and tension testing the MultiTest-dV’s simple controls, backed by sophisticated electronics, make it the ideal choice for a wide range of routine testing.
It improves greatly on the variability encountered with manual testers where tension and compression are applied by hand at varying speeds. By applying force at a constant speed, whilst gripping the sample in a uniform manner, the motorized MultiTest-dV significantly enhances the repeatability of test results.
Operators can perform routine batch testing with excellent throughput, minimizing testing time, and benefitting from the convenience associated with these motorized tensile testers. The MultiTest-dV is a versatile and easy-to-use stand-alone force tester.
Ideal for routine quality control in a production or laboratory environment, with three models rated to 0.5 kN, 1 kN and 2.5 kN.
A motorized test stand can be configured with a Digital Force Gauge for product testing or an Enhanced Load Sensor for basic materials testing.
MultiTest-dV test frame
A ballscrew-driven motorized test frame designed to apply tension and compression from 2 N right up to a capacity of 2.5 kN (550 lbf).
Its versatile construction makes it perfectly suited for testing all kinds of components in quality control or R&D environment.
Force sensors
The MultiTest-dV is a highly flexible tester, which can be configured with either an Advanced Force Gauge for product testing or an Enhanced Load Sensor for basic materials testing.
AFG
A digital force gauge with advanced features to allow simple control of the MultiTest-dV stand. Excellent accuracy of ±0.1% of the gauge capacity.
VectorPro® Lite software
Available as an optional extra to Mecmesin’s motorized force testers, VectorPro Lite is an advanced data acquisition and plotting software package. Call up pre-stored test routines for tensile and compression testing, present test data graphically and issue test reports.
Simply connect the interface cables from your motorized force tester to your PC, and you are ready to enjoy enhanced testing with the power of VectorPro Lite.
Simple
Test to a target displacement limit or, when using any one of the Mecmesin range of Advanced Force Gauges (AFG), to a load limit or break.
Add VectorPro™ Lite software to a MultiTest-dV with AFG, for data acquisition, plotting of graphs, calculation of results, plus reporting and exporting of test data.
Sophisticated
Fit a dedicated ELS loadcell and connect up to VectorPro MT software to use your MultiTest-dV as an entry-level materials tester.
Control your whole test sequence with simple, step-by-step programs. Perform both standard calculations like peak, load at displacement and more complex calculations such as Youngs Modulus, and offset yield strength.
Test frame
The MultiTest-dv is a versatile single-column, motorized tester designed for ease of use by operators of all levels. There are 3 models in the range with ratings of 0.5 kN, 1 kN and 2.5 kN and offer crosshead travel up to 1200 mm (47").
Each occupies minimal bench space and are ideal for applying tensile and compressive forces in a variety of applications.
It delivers superior performance via its control panel and multifunctional control wheel, which allows the precise selection of test parameters such as speed and target force/displacement. Colored LEDs clearly indicate the machine status during testing and operators can effortlessly follow the progress of the test from the force & displacement panel.
For more in-depth recording and analysis of test data, the MultiTest-dV can be connected via its USB output port to VectorPro Lite advanced data-acquisition and plotting software package.
Adjustable safety limit switches are fitted to ensure that specimens cannot be stretched too far or grips crushed together.
The MultiTest-dV is fitted with a dovetailed crosshead for quick and easy interchange of force gauges or loadcells. Grips and fixtures can be rapidly fitted to the anvil plate which is pre-drilled with threaded holes for easy connection.
With each model weighing around 25 kg (55 lbs) its compact design and small footprint make it an ideal bench-top tester for use in the quality-control laboratory or production area.
Force Gauge
The Advanced Force Gauge (AFG) is a self-contained device comprising an internal loadcell and its own display.
There are 10 models ranging in capacity from 2.5 to 2500 N (0.5 - 500 lbf) each featuring an impressive measurement accuracy of ±0.1% of full-scale.
The AFG is positioned on the crosshead of the test frame via a dovetailed fixing and continuously measures & displays tension/compression, whilst simultaneously capturing the maximum peak readings in the background.
When the AFG is connected to the MultiTest-dV via an interface cable it can transfer the displayed 'live' load reading to the front panel and perform basic control of the test. This is achieved by configuring settings within the AFG to send a signal to the test frame to 'stop' or 'stop and reverse' when a load limit or specimen break is detected.
Tension and compression values obtained by the AFG can be transmitted directly to a PC or printer for the recording of results.
Alternatively, force readings are combined with displacement readings within the MultiTest-dV and sent to the USB output port to create a data package, which is accessed by VectorPro Lite software for plotting graphs, calculation of results and creation of test reports.