Mark-10 SFCOMP-1 - Complete Options Package for ESM1500S / ESM750S
Includes all functions listed below. Requires a Series 7 or 5 gauge or indicator.
- SF008 - Position the crosshead by manually pushing or pulling on the force gauge shaft or load cell. Increasing force produces greater speeds. Ideal for setups and quick positioning.
- SF009 (ESM1500 / ESM750) & SF009-1 (ESM1500S / ESM750S) - Position is indicated on the control unit display, with output via USB. An internal scale utilizing Renishaw technology produces significantly higher accuracy than with conventional rotary encoder-based designs. Backlash and nonlinearity are virtually eliminated.
- SF010 - Fully control the stand and force gauge / indicator via custom-written application in any language supporting ASCII communications. Also responds to the legacy Chatillon TCD command set and legacy Nexygen TCD software (not available from Mark-10). This option is not required for MESUR®gauge Plus software.
- SF011 - The stand stops at or cycles between programmable upper and lower travel distances.
- SF012 - Protects a force gauge or force sensor against overload. Also compatible with many competitors’ gauges.
- SF013 - The crosshead moves to a limit switch, force set point, travel position, or break, then stops and reverses direction at full speed to the opposite limit.
- SF014 - Same as auto-return, but programmable up to 99,999 cycles. Programmable dwell time at upper and lower limits up to 9,999 seconds.
- SF016 - Individually specify speeds for the up and down directions.
- SF017 - Extends the standard speed range down to 0.001 in/min (0.02 mm/min).
- SF018 - ESM1500 / ESM1500S: Extends max speed to 90 in/min (2,300 mm/min).
- SF018-1 - ESM750 / ESM750S: Extends max speed to 60 in/min (1,525 mm/min).
- SF019 - Crosshead stops at a programmable drop in force.
- SF020 - Dynamically adjusts the crosshead position to maintain a specified load for an indefinite or specified period of time.
- SF021 - Stops the crosshead and/or zeroes the travel display at an initial preload - useful in tensile, spring, elongation, and other applications.
- SF022 - Save and recall sets of test parameters, such as speeds, travel limits, preload, etc. Maximum of 50 profiles may be stored.