The Liberty DL-AR942 Digitalinx HDMI adapter ring comes with cable locking ring, Faux ferrite clamp, 4 sets Torx T10 screws and nuts, interseries adapter for DVI Digital (M) to HDMI (F), Apple certified adapter Lightning (M) to HDMI (F) and Lightning (F) to power device, and security clamp to attach Apple Adapters to DL-AR system. The adapters are molded with a very strong eyelet that attach to the aircraft-grade steel cable. The main clamp is ABS and it can connect to HDMI cables up to 11mm in diameter. A two sets of foam rubber inserts for differing cable sizes are included. The DL-AR942 is applicable in boardroom, for education, in the house of worship and on presentations by adapting various mobile content devices and interfacing laptops, Macs, iPad, Smartphone to HDMI.

The security features of the ring are two staged. The clamp cannot be opened or installed without a Torx® T10 Pin driver. This security screw has the raised pin in the center of the star to prevent standard Torx® drivers from use. Inside the clamp is a second security feature, a steel ring with a 1.5mm hex set screw that locks the ends of the cables together. The unit is shipped with four Torx® Pin screws and nuts. Two are extra in case of loss. Liberty item T10PD is a simple tool kit of a T10 pin driver and a 1.5mm hex wrench. The T10PD is sold separately.

With Liberty DL-AR942 Digitalinx HDMI adapter ring you can now eliminate the panic and expense when presentation adapters go missing or get lost. Our patent-pending tensile aircraft strength ring & clamp locks in the HDMI cable going to your display while any adapter you may need is at your fingertips. Not only do you get a solid and reliable connection, but the adapters are guaranteed to stay locked to the HDMI cable so they won't get lost for the next presentation.