| Model LINO ML90 Specifications |
| No of lines / points |
3 lines/1 point |
| Directions |
vertical front, right, horizontal, plumb down |
| Levelling / line accuracy |
±0.7 mm @ 10 m (0.027 in @ 10m) |
| 90° angular accuracy |
±0.2 mm / m |
| Self-levelling range |
±5 ° |
| Self-levelling time |
< 10 s |
| Range, visible* |
20 m (65.6 ft) |
| Vertical adjustment over plumb point |
automatically at ±4° vertical |
| Motorized unit, works with XCR Catch for auto-alignment |
No remote control,
No Smart targeting |
| Range of remote control / Smart Targeting with XCR Catch |
No remote control |
| Range with XCR Catch (line location) |
RVL 100 receiver: 80m* |
| Out-of-level warning |
yes, laser beam blinks |
| Levelling system |
Pendulum levelling |
| Pendulum lock |
no, not necessary |
| Laser type |
< 1 mW, 635 nm, class 2 (IEC 60825-1:2008) |
| Protection class |
IP 54 |
| Battery type |
type D, 2 x 1.5V or rechargeable NiMH battery pack |
| Operating time alkaline batteries |
12 h |
| Operating time recharg. batteries |
15 h |
| Charging during operation |
yes is possible |
| Low power alert |
yes, red LED indication on keypad: blinking = power lasts up to 2 h permanent = power too low |
| Dimensions ML device |
250 x 159 x 230 mm (9.9 x 6.3 x 9.1 inch) |
| Weight with batteries |
2200 g (77oz) |
| Operating temperature |
-10 to + 45° C (14° F to + 113° F) |
| Storage temperature |
-25 to +70 ° C (-13° F to + 158° F) |
| Fan angle vertical sides |
120 ° |
| Fan angle vertical front |
120 ° |
| Fan angle horizontal |
170 ° |
| Laser line width @ 5 m distance |
< 2 mm |
| Tripod thread |
5/8 in |
| Pulse power for receiver |
yes, is permanently switched on |
*visible range is dependent from light conditions
** in straight line to the device |