The Leica DIGICAT 550i XF introduces additional low frequencies to enable you to trace utilities over longer distances. Locating and tracing underground utilities is a major concern, therefore detecting the position of buried cables and pipes before excavation work can help prevent operator injury, asset damage risks and any subsequent costs. The robust Leica DIGICAT 550i XF cable locators have additional low tracing frequencies making them ideal for locating and tracing buried utilities over long distances and are engineered for ease-of-use, enabling users to simply press the trigger and start locating. Unmatched ease-of-use

Leica 550i XF Digi System with DigiCat 550i XF Locator and DigiTex 100t XF Transmitter ×

With Automatic Pinpointing there is no need for you to manually adjust the sensitivity of your DIGICAT cable locator ensuring you’re using the optimum sensitivity for the environment you are detecting the underground utilities in. Reducing the likelihood of human error and enabling easier and more efficient cable and pipe locating. Ultimately saving you time and money.

Improved accuracy and application scope

The Leica DIGICAT 550i XF cable locators help you perform a wide range of utility locating and tracing applications and should be used in conjunction with a DIGITEX 100t xf or 300t xf signal transmitter and/or the Digisystem accessories, for improved accuracy and range of applications.

Estimating the depth of the underground infrastructure on your construction site improves utility locating accuracy and data range. Depth estimation can be obtained by using a DIGICAT 550i xf cable locator and a DIGITEX 100t xf or 300t xf signal transmitter.
 
The Leica DIGITEX xf-Series signal transmitters are ideal for tracing buried utilities over greater distances. They apply a signal onto underground utilities that don't carry a detectable signal. A Leica DIGICAT xf-Series locator can then be used to locate the signal from the Leica DIGITEX signal transmitter.

The Leica DIGITEX xf-Series signal transmitters are designed to provide long distance utility tracing in conjunction with the Leica DIGICAT xf-Series locators.

Improved utility detection over greater distances

These intelligent signal transmitters can be used:

• To trace and locate utilities over longer distances using additional lower frequencies
• Enables depth estimation, when using a depth enabled cable locator
• Enables locating of non-conductive utilities
• Use a range of accessories to locate a range of utilities

Leica Digitex Signal Transmitters 

 

Leica Digitex signal transmitters deliver significantly higher power than previous models. This improved performance will allow users to:

• Trace utilities over a greater distance
• „Improve utility detection in areas of high signal interference
• „Improve depth estimation when using a depth locator

Direct Connection ×	Direct Connection Connect the Digitex to a conductive utility such as a valve, stop tap or other access point.
Signal Clamp Connection ×	Signal Clamp Connection A signal clamp is used to apply the Digitex signal to a pipe or live electricity cable. Supply is not interrupted by the signal and the operator is not exposed to any live utility.
Induction ×	Induction The Digitex induces a tracing signal into the buried pipe or cable. This is a quick and convenient method when direct connection or signal clamping is not possible.