Powerful Feature Set
Timing cursors, history mode and serial data protocol decoding help debug the most complicated problems
Easy to Use
Simple mouse operations control every aspect of the user-interface from panning and zooming waveforms to configuring the trigger
Mixed Signal
Turn your PC into an MSO by connecting LogicStudio to any of ten popular oscilloscopes from LeCroy, Tektronix and Agilent
LogicStudio Logic Analyzer
Logic analyzers are known to be slow, complicated and expensive but LogicStudio™ changes all this by delivering a powerful feature set, high-performance hardware and an intuitive point and click user-interface. With timing cursors, history mode, I2C, SPI and UART decoding, powerful triggering and simple navigation the PC is transformed in to an all-in-one debug machine.
Intuitive User Interface for Efficient Debug
LogicStudio software provides an intuitive interface for capturing, analyzing and triggering waveforms. All channels, settings and controls can be accessed from the main screen. In addition, complex trigger condi- tions conditions can be created with a simple mouse click. The user-interface works with basic mouse operations. To pan the waveforms simply click and drag, use the mouse wheel to zoom in, or scan the waveforms with the magnification tool to get a great view of the details. With all the debug tools accessible from the main screen, debugging is simple, efficient and just one mouse click away.
Turn the PC into a Mixed Signal Oscilloscope
LogicStudio provides even more functionality when an oscilloscope is connected to the PC. Analog waveforms from the oscilloscope are displayed alongside the digital and serial waveforms captured by LogicStudio. LogicStudio is compatible with ten popular oscilloscopes series covering bandwidths from 40 MHz up to 1 GHz.
Easy to Use Debug Tools
Digital, Serial, Analog
Connect Teledyne LeCroy, Tektronix or Agilent oscilloscope to the same PC as the LogicStudio 16 and turn the PC into a Mixed Signal Oscilloscope displaying digital, serial and analog signals simultaneously allowing you to get a full picture of your embedded system
Waveform Magnifier
Get a better view of the waveforms by passing over them with the magnifier, scroll the mouse wheel to zoom in for an even closer look. The magnifier shows waveform details in a long capture without having to change the horizontal scale. |
Timing Cursors
Quickly measure the time between transitions on a single line, across digital lines or from a digital line to an analog waveform. Snap the cursors directly to the waveform edge for precise measurements.
|
Powerful Triggering
For difficult problems a simple edge or logic level trigger is not enough. LogicStudio advanced triggering provides an environment for creating powerful combinations of edge, logic level, parallel bus and serial bus triggers to isolate difficult problems. |
Point, Click, Debug
LogicStudio is fast! Waveforms update quickly and panning or zooming is extremely responsive. The software interface is modern and intuitive creating a new logic analyzer experience. LogicStudio is easy to operate with simple left-click and right-click controls plus all buttons are on the main screen, no complicated menus to navigate.
1. Serial Data Protocol Decode and Trigger
Decode I 2 C, SPI and UART serial data busses and view the appropriate clock and data signals directly below the protocol message. Isolate specific data patterns or addresses by triggering directly on that data.
2. Logic Thresholds
Choose from standard TTL and CMOS levels or create a custom level from 0–7 V.
|
3. Interleaving for Higher Performance
Use all 16 channels at 500 MS/s or 8 channels at 1 GS/s for more timing resolution.
4. Add/Remove/Hide Waveforms
One click to add a new waveform, one click to remove it, right-click to hide it for later viewing.
5. Built-in Help and Support
Not sure how to use a certain tool, mouse over for tool tips or access the manual from the Help menu. |
6. History
Did something interesting or surprising just flash across the screen, stop the trigger and flip through a history of the previous 100 acquisitions.
7. Waveform Display and Scaling
View waveforms stacked on top of each other or overlay one waveform on top of another. Change the vertical scale by dragging the bottom edge.
|