It corresponds to the IP signal and the video signal of the 2K video format at SMPTE ST 2022-6 (non-compression) and SMPTE 2110-20 (non-compression).

Video analysis function

• Various types of video signals, in addition to a variety of displays such as video signal waveform displays, vector display, picture display, 5 BAR display, the CIE chromaticity diagram, and CINELITEII, video signal quality (QoE) freezes error, error black, gamut error detection, etc. are equipped.

Audio analysis function

• The audio signals superimposed on IP signals can be displayed on a level meter.

Transmission quality analysis function

• Together with monitoring transmission errors such as packet loss, checksum error, and packet discontinuity, the transmission quality (QoS) monitoring function, such as packet jitter, which was difficult to observe by using IP, is strengthened.

Capture function

• A screen capture function to capture the display screen as still image data is equipped. It also has a frame capture function and can capture one frame of an active video period.

Time code display

• The time code is superimposed on IP signals and can be displayed.
• The time code can also be used as the timestamp of the event log.

Input video format

• Corresponding IP standard: SMPTE ST 2022- 6, SMPTE ST 2110- 20
• Supported format: 1080 (60, 59.94, 50 I/P), 720 (60,59.94,50 I/P), 576 (50I), 487 (59.94I), (YCBCRY4:2:2/10 bit）

Input audio format

Approved standard SMPTE ST 2022- 6, SMPTE ST 2110- 30

• Sampling frequency 48 kHz 　
• Quantization accuracy 24 bits 　
• Supported formats L-PCM/Dolby-E/Dolby Digital/Dolby Digital Plus. 　
• Clock generation method Generated from video clock 　
• Synchronization condition Synchronized with video signals.
• The maximum 16 channels of IP audio separation channels are separated/displayed.

* L-PCM requires optional mounting of LV5700-SER 03.

* Dolby correspondence requires optional mounting of LV5700-SER03/04.

Input terminal

• Input terminal SFP +
• Number of terminals 2 　
• Approved standard 10GBASE-SR/10G BASE-LR

Auxiliary data

• Approved standard SMPTE ST 2110-40