It is a unit that can display various SDI signals.
Video analysis function
Various types of video signals, in addition to a variety of displays such as video signal waveform displays, vector display, picture display, 5 BAR display, video signal quality (QoE) freezes error, error black, gamut error detection, etc. are equipped as standard equipment.
Voice analysis function
The audio signals superimposed on SDI signals can be displayed on a level meter.
* Lissajous, surround and status can be displayed by adding LV7300- SER20
SDI signal data analysis function
The status display has an error detection function of CRC and embedded sound. It also has an event log, data dump, phase difference measurement functions, and can analyze SDI signals.
Screen capture function
A screen capture function to capture the display screen as still image data and a frame capture function to capture 16 frames of data are equipped. The captured data can be saved in BMP format in comparison with the input signal, as well as the display on the main body, and thus confirmation with the personal computer is possible.
Time code display
The time code superimposed on SDI signals and IP signals can be displayed. The time code can also be used as the timestamp of the event log.
Input/output terminal
SDI input terminal - BNC connector 2 terminal
SDI output terminal - BNC connector 2 terminal
Output reclock signal - The SDI signals of the input terminals are reclock output to the output terminals, respectively.
Select reclock signal - The signals of the input terminals can be switched/reclock output
Audio level meter (8ch)
Embedded audio - SMPTE ST 299, SMPTE ST 272, 48 kHz/24 bit/L-PCM
Synchronization condition - All are synchronized with the video clock. All input SDI signals are synchronized.
Eye pattern display
The eye pattern waveform, jitter waveform of SDI signal, and the measurement result of each parameter can be displayed. Only input terminal 1 corresponds to eye pattern display.