AC/DC Single Phase Digital Power Meter (100 kHz)
Teledyne Test Tools T3PM1100 is a digital power meter for single-phase (1P/2W) AC power measurement. The T3PM1100 offers DC, 0.1 Hz ~ 100 kHz test bandwidth, 16 bits ADC, and 300 kHz sampling rate. The T3PM1100 features a 5” TFT LCD screen with a five-digit measurement display. It also has options to display waveform (voltage/current/power), the integration measurement function, harmonic measurement and analysis of each order (meeting the IEC 61000-4-7 harmonics measurement requirements at 50/60 Hz), external sensor input terminals, and various communication interfaces to help users to make convenient and accurate power measurements.
The rated direct input voltage of T3PM1100 is 600 V, and the input current is 20 A. The minimum current level is 5 mA (resolution up to 0.1 μA), and the power measurement resolution is 0.1 μW. The crest factor can reach 3 (half measurement range can get 6 or 6 A), and the voltage/current/power measurement capability can reach ±0.05 % reading ±0.1 % level. Different measurement modes can be selected and offer up to 25 relevant parameters for power measurement. The T3PM1100 can measure the power consumption of available products and the standby power consumption of low-power devices that require a more significant range and accuracy.
In addition, the T3PM1100 has a rich set of auxiliary measurement functions. High voltage measurements can be done using a VT rate-setting and an external voltage Potential Transformer. To measure currents above 20 A, a Current Transformer (CT) can be used, and the type of CT determines the instrument settings. When a voltage output type CT is used, measurement can be conducted through the external current sensor input terminals EXT1/EXT2. When a current output type CT is used, the CT can be directly connected to the existing input terminal on the rear panel and set the appropriate CT ratio state in the Ratio configuration menu.
T3PM1100 provides RS-232C, USB device (virtual COM), and LAN communication interfaces for remote control applications. USB host supports screen capture, accessing data stored in internal memory, and firmware updates.