| Model : T3AWG3252 High Definition Dual Channel Arbitrary Waveform Generators Specifications |
| Analog |
2 |
| Digital |
0–8 |
| Markers |
1 |
| AFG |
Improved Direct Digital Synthesizer (DDS) based technology |
| AWG |
Variable Clock "True Arb" Technology |
| Voltage Range Vpp (50 Ω into 50 Ω) |
0 to 6 Vpp (12 Vpp opt.) |
| Accuracy1) |
±(1% of setting (Vpp) + 5 mV) |
| Resolution |
< 0.5 mVpp or 5 digits |
| Output Impedance |
Single-ended: 50 Ω and 5 Ω (Low Impedance) |
| Range (50 Ω into 50 Ω) |
-3 V to +3 V (-6 V to +6 V opt.) |
| Range (50 Ω into High Impedance) |
-6 V to +6 V (-12 V to +12 V opt.) |
| Accuracy (50 Ω into 50 Ω) |
±(1.0 % | setting | ± 5 mV) |
| Resolution |
< 4 mV or 4 digits |
| Amplitude Range (50 Ω, single-ended) |
-3 V to +3 V (-6 V to +6 V opt.) |
| Amplitude Accuracy |
±(1.0 % | setting | ± 10 mV) |
| *1) 1 KHz Sine, 0 V offset, > 5 mVpp amplitude , 50 Ω load |
| AFG Specifications - Arbitrary Function Generator Operating Mode |
| Ouput Channels |
| Connectors |
BNC on front panel |
| Output Type |
Single-ended |
| Output Impedance |
50 Ω or 5 Ω (Low Impedance) selectable |
| Technology |
Direct Digital Synthesizer (DDS) |
| Standard Waveforms |
Sine, Square, Pulse, Ramp, Noise, DC, Sin(x)/x, Gaussian, Lorentz, Exponential Rise, Exponential Decay, Haversine Run Modes Continuous, Modulation, Sweep, Burst |
| Vertical Resolution |
16 bits |
| Waveform Length |
16.384 Points |
| Range |
13.3 ns to 100 s |
| Resolution |
104 ps |
| Accuracy |
±(0.1% setting + 5 ps) |
| Frequency Range |
1 μH to 250 MHz |
| Frequency Resolution |
1 μH or 15 digits |
| Output Amplitude (50 Ω into 50 Ω)2) |
0 to ≤ 70 MHz 12 V
> 70 MHz to ≤ 120 MHz 9 V
> 120 MHz to ≤ 180 MHz 6 V
> 180 MHz to ≤ 250 MHz 3 V |
| Flatness (1 Vp-p , relative to 1 KHz) |
DC to 250 MHz ± 0.5 dB |
| Harmonic Distorsion (1 Vp-p) |
1 μH to ≤ 10 MHz < -65 dBc
> 10 MHz to ≤ 50 MHz < -55 dBc
> 50 MHz to ≤ 100 MHz < -45 dBc
> 100 MHz to ≤ 250 MHz < 30 dBc |
| Total Harmonic Distorsion (1 Vp-p) |
10 kHz to 20 KHz < 0.1 % |
| Spurious (1 Vp-p) 3) |
1 μH to ≤ 10 MHz < -60 dBc
> 10 MHz to ≤ 250 MHz < -55 dBc |
| Phase Noise (1 Vp-p, 10 KHz offset) |
10 MHz < -120 dBc/Hz typ.
100 MHz < -115 dBc/Hz typ. |
| Frequency Range |
1 μH to 120 MHz |
| Output Amplitude (50 Ω into 50 Ω)2) |
0 to ≤ 40 MHz 12 V
> 40 MHz to ≤ 80 MHz 10 V
> 80 MHz to ≤ 120 MHz 7 V |
| Frequency Resolution |
1 μH or 15 digits |
| Rise/Fall time (10 % to 90 %) |
2.0 ns |
| Overshoot (1 Vp-p) |
< 2 % |
| Jitter (rms) |
< 20 ps |
| Frequency Range |
1 μH to 120 MHz |
| Frequency Resolution |
1 μH or 15 digits |
| Output Amplitude (50 Ω into 50 Ω)2) |
0 to ≤ 5 MHz 12 V
> 5 MHz to ≤ 60 MHz 10 V
> 60 MHz to ≤ 120 MHz 7 V |
| Pulse width |
3 ns to (Period-3.0 ns) |
| Resolution |
20 ps or 15 digits |
| Pulse duty cycle |
0.1% o 99.9 % (limitation of pulse width apply |
| Leading/trailing edge transition time |
2.5 ns to 1000 ns |
| Resolution |
2 ps or 15 digits |
| Overshoot (1 Vp-p) |
< 2 % |
| Jitter (rms, with rise time and fall time >2 ns) |
< 20 ps |
| Frequency Range |
1 μH to 10 MHz |
| Linearity (<10 KHz, 1 Vp-p, 100 %) |
≤ 0.1% |
| Symmetry |
0 % to 100 % |
*2) Amplitudes double on HiZ load
*3) excluding fSa-Fout, fSa-2*fout |
| Frequency Range |
| Exponential Rise, Exponential Decay |
1 μH to 10 MHz |
| Sin(x)/x, Gaussian, Lorentz, Haversine |
1 μH to 20 MHz |
| Sin(x)/x |
1 μH or 15 digits |
| Gaussian, Lorentz, Exponential Rise, Exponential Decay, Haversine |
1 μH or 14 digits |
| Bandwitdh (-3 dB) |
> 200 MHz |
| Level |
0 V to 6 V- | carrier max value(Vpk) | |
| Resolution |
1 mV |
| Number of Samples |
2 to 16.384 |
| Rise/Fall Time |
2.0 ns |
| Jitter (rms) |
< 20 ps |
| Frequency Range |
1 μH to 125 MHz |
| Frequency Resolution |
1 μH or 15 digits |
| Non-Arbitrary |
± 2 % x 10-6 of setting |
| Arbitrary |
± 2 % x 10-6 of setting ± 1 μH |
| Carrier Waveforms |
Standard Waveforms (except Pulse, DC and Noise) and Arbitrary |
| Modulation Source |
Internal or External |
| Internal Modulating Waveforms |
Sine, Square, Ramp, Noise, Arbitrary |
| Internal |
500 μHz to 48 MHz |
| External |
max 8 MHz |
| Depth |
0.00 % to 120.00 % |
| Carrier Waveforms |
Standard Waveforms (except Pulse, DC and Noise) and Arbitrary |
| Modulation Source |
Internal or External |
| Internal Modulating Waveforms |
Sine, Square, Ramp, Noise, Arbitrary |
| Internal |
500 μHz to 48 MHz |
| External |
max 8 MHz |
| Depth |
0.00 % to 120.00 % |
| Peak Deviation |
DC to 250 MHz |
| Carrier Waveforms |
Standard Waveforms (except Pulse, DC and Noise) and Arbitrary |
| Modulation Source |
Internal or External |
| Internal Modulating Waveforms |
Sine, Square, Ramp, Noise, Arbitrary |
| Internal |
500 μHz to 48 MHz |
| External |
max 8 MHz |
| Peak Deviation |
Range 0° to 360° |
| Carrier Waveforms |
Standard Waveforms (except Pulse, DC and Noise) and Arbitrary |
| Modulation Source |
Internal or External |
| Internal Modulating Waveforms |
Square |
| Internal |
500 μHz to 48 MHz |
| External |
max 8 MHz |
| Depth |
0.00 % to 120.00 % |
| Hop Frequency |
1 μHz to 250 MHz |
| Number of keys |
2 |
| Carrier Waveforms |
Standard Waveforms (except Pulse, DC and Noise) and Arbitrary |
| Modulation Source |
Internal or External |
| Internal Modulating Waveforms |
Square |
| Internal |
500 μHz to 48 MHz |
| External |
max 8 MHz |
| Depth |
0.00 % to 120.00 % |
| Hop Phase |
0° to +360° |
| Number of keys |
2 |
| Carrier Waveforms |
Pulse |
| Internal Modulating Waveforms |
Sine, Square, Ramp, Noise, Arbitrary |
| Internal |
500 μHz to 48 MHz |
| External |
max 8 MHz |
| Deviation Range |
0 % to 50 % of pulse period |
| Carrier Waveforms |
Pulse |
| Modulation Source |
Internal or External |
| Internal Modulating Waveforms |
Sine, Square, Ramp, Noise, Arbitrary |
| Internal |
500 μHz to 48 MHz |
| External |
max 8 MHz |
| Deviation Range |
0 % to 50 % of pulse period |
| Type |
Linear, Logarithmic, Staircase and user defined |
| Waveforms |
Standard Waveforms (except Pulse, DC and Noise) and Arbitrary |
| Sweep Time |
40 ns to 2000 s |
| Hold/Return Times |
0 to (2000 s-40 ns) |
| Sweep/Hold/Return Time Resolution |
20 ns or 12 digits |
| Total sweep time accuracy |
≤ 0.4 % |
| Sine |
1 μHz to 250 MHz |
| Square |
1 μHz to 120 MHz |
| Trigger Source |
Internal/External/Manual |
| Type |
Trigger and Gated |
| Waveforms |
Standard Waveforms (except Pulse, DC and Noise) and Arbitrary |
| Burst Count |
1 to 4,294,967,295 cycles or infinite |
| AWG Specifications - Variable Clock (True Arbitrary) Operating Mode |
| Connectors |
BNC on front panel |
| Output Type |
Single-ended DC coupled |
| Output Impedance |
50 Ω or 5Ω (Low Impedance) selectable |
| Technology |
Variable Clock (True Arbitrary) |
| Run Modes |
Continuous, Triggered Continuous, Single/Burst, Stepped |
| Vertical Resolution |
16 bits |
| Waveform Length |
16 to 128 MSamples @Channel (up to 1 GSample @Channel) |
| Waveform Granularity |
1 (length > 384), 16 (16 ≤ length ≤ 384) |
| Sequence Length |
1 to 16384 |
| Sequence Repeat Counter |
1 to 4,294,967,294 or infinite |
| Range |
23.52 ns to 7 s |
| Resolution |
± 1 sampling clock cycle |
| Range |
0 to 3.4 μs |
| Resolution |
≤ 5 ps |
| Accuracy |
±(1% | setting | ± 20 ps) |
| Initial Skew |
< 200 ps |
Bandwidth
calculated: (0.35 / rise or fall time) |
318 MHz |
Harmonic Distorsion
Sine Wave 32 points, 1 Vpp |
< -60 dBc @(1 GS/s and 31.25 MHz) |
Spurious Sine
Wave 32 points, 1 Vpp |
< -60 dBc @(1 GS/s and 31.25 MHz) |
SFDR (Spuriuos Free Dynamic Range)
Sine Wave 32 points, 1 Vpp |
< -60 dBc @(1 GS/s and 31.25 MHz) |
Rise/Fall Time
1 Vpp, single-ended 10 % to 90 % |
≤ 1.1 ns |
Overshoot
1 Vpp, single-ended |
< 2 % |
| Range |
1 S/s to 1 GS/s |
| Resolution |
16 Hz |
| Accuracy |
± 2.0 x 10-6 |
| Rj on clock patter (rms) |
< 10 ps |
| Output Channels |
| Connectors |
mini-SAS HD connector on rear panel (not standard pin-out) |
| Number of connectors |
1 |
| Number of Outputs |
8 channels |
| Output Impedance |
100 Ω Differential |
| Output type |
LVDS |
| Rise/Fall time (10 % to 90 %) |
< 1 ns |
| Jitter (rms) |
20 ps |
| Maximum Update Rate |
1 GS/s |
| Memory Depth |
128 MSample @ Ch (up to 1 GSample) |
| connector type |
BNC on Front panel |
| Number of connectors |
one |
| Output impedance |
50 Ω |
| Amplitude |
1 V to 2.5 V |
| Resolution |
10 mV |
| Accuracy |
± (2 % setting + 10 mV) |
| Rise/Fall Ttime (10 % to 90 %, 2.5 Vpp) |
< 700 ps |
| Jitter (rms) |
20 ps |
| Marker out to analog channel skew |
| Range |
Variable Clock Mode: 0 to 3 μs
AFG Mode: 0 to 14 s. in continuos mode, 0 to 3 μs in Trig. Mode |
| Resolution |
Variable Clock Mode: 78 ps, AFG Mode: 39 ps |
| Accuracy |
± (1% setting + 140 ps) |
| Initial skew |
< 1 ns |
| Connector type |
BNC on the Front Panel |
| Input impedance |
50 Ω / 1 KΩ |
| Slope/Polarity |
Positive or Negative or both |
| Input damage level |
< -15 V or > +15 V |
| Threeshold control level |
- 10 V to 10 V |
| Resolution |
50 mV |
| Threshold control accuracy |
± (10 % | setting | + 0.2 V) |
| Input voltage swing |
0.5 Vp-p minimum |
| Minimum pulse width (1 Vpp) |
3 ns |
| Initial trigger/gate delay to Analog Output |
Variable Clock Mode: < 240 * DAC clock period +32 ns
AFG Mode: < 360 ns (< 420 ns in troggeed sweep mode) |
| Trigger in to output jitter |
AFG Mode: < 40 ps
Variable Clock Mode: 0.29 * DAC clock period |
| Maximum frequency |
AFG: 65 Mpts on Rising/Falling Edge, 80 MTps on both edges
Variable Clock Mode: 42.5 MTps
MTps = Mega Transition per second |
| Connector type |
SMA on rear panel |
| Input impedance |
50 Ω AC coupled |
| Input Voltage range |
-4 dBm to 11 dBm sine or square wave |
| Damage level |
+14 dBm |
| Frequency range |
5 MHz to 100 MHz |
| Connector type |
SMA on rear panel |
| Output impedance |
50 Ω AC coupled |
| Frequency range |
10 MHz |
| Accuracy |
± 2.0 x 10-6 |
| Aging |
± 1.0 x 10-6/year |
| Amplitude |
1.65 V |
| Jitter (rms) |
< 20 ps |
| Connector type |
SMA on rear panel |
| Input impedance |
> 2 MΩ |
| Number of inputs |
One |
| Input Voltage Range |
-0,5 V to +0.5 V |
| Bandwidth |
8 MHz with 40 MS/s sampling rate |
| Vertical resolution |
8 bits |
| Source Voltage and Frequency |
100 to 240 VAC ±10 % @ 45–66 Hz |
| Max Power Consumption |
100 W |
| Temperature (operating) |
+5 °C to +40 °C (+41°F to 104 °F) |
| Temperature (non operating) |
-20 °C to +60 °C (-4 °F to 140 °F) |
| Humidity (operating) |
5 % to 80 % relative humidity with a maximum wet bulb temperature of 29 °C at or below +40 °C, (upper limit de-rates to 20.6 % relative humidity at +40 °C . Non-condensing. |
| Humidity (non-operating) |
5 % to 95 % relative humidity with a maximum wet bulb temperature of 40 °C at or below +60 °C, (upper limit de-rates to 29.8 % relative humidity at +60 °C. Non-condensing. |
| Altitude (operating) |
3,000 meters (9,842 feet) maximum at or below 25 °C |
| Altitude (non operating) |
12,000 meters (39,370 feet) maximum |
| Safety |
EN61010-1 |
| Main Standards |
EN 61326-1:2013 – Electrical equipment for measurement, control and laboratory use – EMC requirements – Part 1: General requirements |
| Immunity |
EN 61326-1:2013 |
| System specifications 123 |
| Display |
7 inch, 1024 x 600, capacitive touch LCD |
| Operative System |
Windows 10 IoT – LTSB (Long Term Service Branch) |
| External Dimensions |
W 362 mm – H 143 mm – D 258 mm |
| Weight |
6.5 kg |
| Front panel connectors |
CH1 OUTPUT (BNC)
CH2 OUTPUT (BNC)
MARKER OUT (BNC)
TRIGGER IN (BNC) |
| Rear panel connectors |
Ref. Clk. IN (SMA)
Ref. Clk. Out (SMA)
Ext. Mod. IN (SMA)
External monitor ports (HDMI, VGA or more)
DIGITAL POD A[7..0]
1x USB 2.0 and 1x USB 3.0 or more
Ethernet port (10/100/1000BaseT Ethernet, RJ45 port)
2 PS/2 keyboard and mouse ports |
| Hard Disk |
240 GB SSD or better |
| Processor |
Intel® Celeron J1900, 2 GHz (or better) |
| Processor Memory |
8 GB or better |