General Specifications |
Number of Channels |
Analog |
2 |
Digital |
8 |
Markers |
1 |
Operating Modes |
Function Generator (AFG) |
Improved Direct Digital Synthesizer (DDS) based Technology |
Arbitrary Waveform Generator (AWG) |
Variable Clock “True Arb” Technology |
Amplitude Voltage Characteristics |
Amplitude Range (50 Ω into 50 Ω) |
0 to 6 Vpp |
Amplitude Range (50 Ω into High-Z) |
0 to 12 Vpp |
Accuracy 1) |
±(1 % of setting (Vpp) + 5 mV) |
Resolution |
< 0.5 mVpp or 5 digits |
Output Impedance |
Single-ended: 50 Ω and 5 Ω ( Low Impedance) |
Amplitude DC |
Amplitude Range (50 Ω into 50 Ω) |
-3 V to +3 V |
Amplitude Accuracy |
±(1.0 % | setting | + 10 mV) |
1) 1 KHz Sine, 0 V offset, > 5 mVpp amplitude , 50 Ω load |
Waveform Types |
Output Channels |
Connectors |
BNC on front panel |
Output Type |
Single-ended |
Output Impedance |
50 Ω or 5 Ω (Low Impedance) selectable |
General Specifications |
Technology |
Direct Digital Synthesizer (DDS) |
Standard Waveforms |
Sine, Square, Pulse, Double Pulse, Ramp, Noise, DC, Sin(x)/x, Gaussian, Lorentz, Exponential Rise, Exponential Decay, Haversine |
Run Modes |
Continuous, Modulation, Sweep, Burst |
Arbitrary Function Waveform Length |
16.384 Points |
Internal Trigger Timer |
Range |
13.4 ns to 100 s |
Resolution |
104 ps |
Accuracy |
±(1.1 % setting + 5 ps) |
Sine Wave Characteristics |
Frequency Range |
1 μHz to 150 MHz |
Frequency Resolution |
1 μHz or 15 digits |
Output Amplitude (50 Ω into 50 Ω) 2) |
1 µH to 150 MHz, 6Vpp |
Flatness (1 Vp-p , relative to 1 KHz) |
DC to 150 MHz, ±0.5 dB |
Harmonic Distortion (1 Vp-p) |
1 μHz to ≤ 20 kHz, <-75 dBc
> 20 kHz to ≤1 MHz, <-70 dBc
> 1 MHz to ≤ 10 MHz, <-65 dBc
> 10 MHz to ≤ 50 MHz, <-55 dBc
> 50 MHz to ≤ 120 MHz, <-45 dBc
> 120 MHz to ≤ 150 MHz, <-40 dBc |
Total Harmonic Distorsion (1 Vp-p) |
10 kHz to 20 KHz, < 0.04 % |
Spurious (1 Vp-p) 3) |
1 μHz to ≤ 10 MHz, <-80 dBc
> 10 MHz to ≤ 150 MHz <-80 dBc + 6 dBc/octave |
Phase Noise (1 Vp-p, 10 KHz offset) |
10 MHZ, < -127 dBc/Hz typ.
100 MHZ, < -115 dBc/Hz typ. |
Square Wave Characteristics |
Frequency Range |
1 μHz to 80 MHz |
Output Amplitude (50 Ω into 50 Ω) 2) |
1 μHz to ≤ 150 MHz, 6 Vpp |
Frequency Resolution |
1 μHz or 15 digits |
Rise/Fall time (10 % to 90 %) |
4.0 ns |
Overshoot (1 Vp-p) |
< 1 % |
Jitter (rms) |
< 2 ps |
Pulse Wave Characteristics |
Frequency Range |
1 μHz to 80 MHz |
Frequency Resolution |
1 μHz or 15 digits |
Output Amplitude (50 Ω into 50 Ω) 2) |
1 µHz to ≤ 80 MHz, 6 Vpp |
Pulse width |
5 ns to (Period-5.0 ns) |
Pulse width Resolution |
20 ps or 15 digits |
Pulse duty cycle |
0 % o 100 % (14 digits, limitations of pulse width apply) |
Leading/trailing edge transition time |
4 ns to 1000 ns |
Transition time Resolution |
2 ps or 15 digits |
Overshoot (1 Vp-p) |
< 1 % |
Jitter (rms, with rise time and fall time >4 ns) |
< 2 ps |
Double Pulse Waves Characteristics |
Frequency Range |
1 μHz to ≤ 3 MHz, 6 Vpp (over 50 Ω)
>3 MHz to ≤ 10 MHz, 5.5 Vpp (over 50 Ω)
>10 MHz to ≤ 50 MHz, 5.0 Vpp (over 50 Ω)
where Vpp = ΙVpp1Ι + ΙVpp2Ι |
Other Pulse Parameters |
same as Pulse Wave |
Ramp Wave Characteristics |
Frequency Range |
1 μHz to 5 MHz |
Linearity (<10 KHz, 1 Vp-p, 100 %) |
≤ 0.1 % |
Symmetry |
0 % to 100 % |
2) Amplitudes double on HiZ load and one channel running at the time |
3) excluding fSa-Fout, fSa-2*fout |
Other Waves Characteristics |
Frequency Range |
Exponential Rise, Exponential Decay |
1 μHz to 5 MHz |
Sin(x)/x, Gaussian, Lorentz, Haversine |
1 μHz to 10 MHz |
Frequency Resolution |
Sin(x)/x |
1 μHz or 15 digits |
Gaussian, Lorentz, Exponential Rise, Exponential Decay, Haversine |
1 μHz or 14 digits |
Additive Noise |
Bandwidth (-3 dB) |
> 150 MHz |
Level |
0 V to 6 V- | carrier max value(Vpk) | |
Resolution |
1 mV |
Arbitrary |
Number of Samples |
2 to 16.384 |
Rise/Fall Time |
4.0 ns |
Jitter (rms) |
< 2 ps |
Frequency Range |
1 μHz to ≤ 80 MHz |
Frequency Accuracy |
Non-Arbitrary |
± 2 % x 10 -6 of setting |
Arbitrary |
± 2 % x 10 -6 of setting ± 1 μHz |
AM (Amplitude Modulation) |
Carrier Waveforms |
Standard Waveforms (except Pulse, DC and Noise) and Arbitrary |
Modulation Source |
Internal or External |
Internal Modulating Waveforms |
Sine, Square, Ramp, Noise, Arbitrary |
Modulating Frequency |
Internal |
500 μHz to 48 MHz |
Depth |
0.00 % to 120.00 % |
FM (Frequency Modulation) |
Carrier Waveforms |
Standard Waveforms (except Pulse, DC and Noise) and Arbitrary |
Modulation Source |
Internal or External |
Internal Modulating Waveforms |
Sine, Square, Ramp, Noise, Arbitrary |
Modulating Frequency |
Internal |
500 μHz to 48 MHz |
Depth |
0.00 % to 120.00 % |
Peak Deviation |
DC to 150 MHz |
PM (Pulse Modulation) |
Carrier Waveforms |
Standard Waveforms (except Pulse, DC and Noise) and Arbitrary |
Modulation Source |
Internal or External |
Internal Modulating Waveforms |
Sine, Square, Ramp, Noise, Arbitrary |
Modulating Frequency |
Internal |
500 μHz to 48 MHz |
Peak Deviation Range |
0° to 360° |
FSK (Frequency Shift Keying) |
Carrier Waveforms |
Standard Waveforms (except Pulse, DC and Noise) and Arbitrary |
Modulation Source |
Internal or External |
Internal Modulating Waveforms |
Square |
FSK Key Rate |
Internal |
500 μHz to 48 MHz |
Depth |
0.00 % to 120.00 % |
Hop Frequency |
1 μHz to 150 MHz |
Number of keys |
2 |
PSK (Phase Shift Keying) |
Carrier Waveforms |
Standard Waveforms (except Pulse, DC and Noise) and Arbitrary |
Modulation Source |
Internal or External |
Internal Modulating Waveforms |
Square |
PSK Key Rate |
Internal |
500 μHz to 48 MHz |
Depth |
0.00 % to 120.00 % |
Hop Phase |
0° to +360° |
Number of keys |
2 |
PWM (Pulse Width Modulation ) |
Carrier Waveforms |
Pulse |
Modulation Source |
Internal or External |
Internal Modulating Waveforms |
Sine, Square, Ramp, Noise, Arbitrary |
PSK Key Rate |
Internal |
500 μHz to 48 MHz |
Deviation Range |
0 % to 50 % of pulse period |
Sweep |
Type |
Linear, Logarithmic, Staircase and user defined |
Waveforms |
Standard Waveforms (except Pulse, DC and Noise) and Arbitrary |
Sweep Time |
40 ns to 2000 s |
Hold/Return Times |
0 to (2000 s-40 ns) |
Sweep/Hold/Return Time Resolution |
20 ns or 12 digits |
Total sweep time accuracy |
≤ 0.4 % |
Start/Stop Frequency Range |
Sine |
1 μHz to 150 MHz |
Square |
1 μHz to 80 MHz |
Trigger Source |
Internal/External/Manual |
Burst |
Type |
Trigger and Gated |
Waveforms |
Standard Waveforms (except Pulse, DC and Noise) and Arbitrary |
Burst Count |
1 to 4,294,967,295 cycles or infinite |
Output Channels |
Connectors |
BNC on front panel |
Output Type |
Single-ended DC coupled |
Output Impedance |
50 Ω or 5 Ω (Low Impedance) selectable |
General Specifications |
Technology |
Variable Clock (True Arbitrary) |
Run Modes |
Continuous, Triggered Continuous, Single/Burst, Stepped |
Vertical Resolution |
16 bits |
Waveform Length |
16 to 128 MSamples @Channel |
Waveform Granularity |
1 (length > 384), 16 (16 ≤ length ≤ 384) |
Sequence Length |
1 to 16384 |
Sequence Repeat Counter |
1 to 4,294,967,294 or infinite |
Timer |
Range |
23.52 ns to 7 s |
Resolution |
± 1 sampling clock cycle |
Analog Channel to Channel Skew |
Range |
0 to 6.59 µs (depending on internal sampling rate) |
Resolution |
1 DAC sampling period |
Accuracy |
±(1% | setting | ± 20 ps) |
Initial Skew |
< 200 ps |
Bandwidth calculated |
(0.35 / rise or fall time): > 160 MHz |
Harmonic Distorsion Sine Wave 32 points, 1 Vpp |
< -62 dBc @(600 MS/s and 18.75 MHz) |
Spurious Sine Wave 32 points, 1 Vpp |
< -80 dBc @(600 MS/s and 18.75 MHz) |
SFDR (Spuriuos Free Dynamic Range) Sine Wave 32 points, 1 Vpp |
< -62 dBc @(600 MS/s and 18.75 MHz) |
Rise/Fall Time 1 Vpp, single-ended 10 % to 90 % |
≤ 2.2 ns |
Overshoot 1 Vpp, single-ended |
< 2 % |
Sampling Rate |
Range |
1 S/s to 600 MS/s |
Resolution |
16 Hz |
Accuracy |
± 2.0 x 10 -6 |
Rj on clock patter (rms) |
< 2 ps |
Output Channels |
Connectors |
mini-SAS HD connector on rear panel (not standard pin-out) |
Number of connectors |
1 |
Number of Outputs |
8 Channels |
Output Impedance |
100 Ω Differential |
Output type |
LVDS |
Rise/Fall time (10 % to 90 %) |
< 1 ns |
Jitter (rms) |
20 ps |
Maximum Update Rate |
600 Mbps |
Memory Depth |
128 MSample @ Ch |
Marker Output |
Connector type |
BNC on Front panel |
Number of connectors |
1 |
Output impedance |
50 Ω |
Output level (into 50 Ω) |
Amplitude |
1 V to 2.5 V |
Resolution |
10 mV |
Accuracy |
± (2 % setting + 10 mV) |
Rise/Fall Time (10 % to 90 %, 2.5 Vpp) |
< 700 ps |
Jitter (rms) |
20 ps |
Marker out to analog channel skew |
Range |
Variable Clock Mode: 0 to 3 μs
AFG Mode: 0 to 14 s in continuous mode, 0 to 3 μs in Trig. Mode |
Resolution |
Variable Clock Mode: 78 ps, AFG Mode: 39 ps |
Accuracy |
± (1% setting + 140 ps) |
Initial skew |
< 1 ns |
Trigger/Gate Input |
Connector type |
BNC on the Front Panel |
Input impedance |
50 Ω / 1 KΩ (programmable) |
Slope/Polarity |
Positive or Negative or both |
Input damage level |
< -15 V or > +15 V |
Threshold control level |
- 10 V to 10 V |
Resolution |
10 mV |
Threshold control accuracy |
± (10 % | setting | + 0.2 V) |
Input voltage swing |
0.5 Vp-p minimum |
Minimum pulse width (1 Vpp) |
3 ns |
Initial trigger/gate delay to Analog Output |
Variable Clock Mode: < 131 * DAC clock period +22.5 ns (< 143 * DAC sampling period +22.5 ns with 2x interpolation)
AFG Mode: < 400 ns (< 460 ns in triggered sweep mode) |
Trigger in to output jitter |
AFG Mode: < 45 ps
Variable Clock Mode: 0.29 * DAC clock period |
Maximum frequency |
AFG: 65 Mpts on Rising/Falling Edge, 80 MTps on both edges
Variable Clock Mode: 42.5 MTps
MTps = Mega Transition per second |
Reference clock input |
Connector type |
SMA on rear panel |
Input impedance |
50 Ω AC coupled |
Input Voltage range |
-4 dBm to 11 dBm sine or square wave (rise time T10-90 <1 ns and duty cycle from 40% to 60%) |
Damage level |
+14 dBm |
Frequency range |
5 MHz to 100 MHz |
Reference clock output |
Connector type |
SMA on rear panel |
Output impedance |
50 Ω AC coupled |
Frequency range |
10 MHz |
Accuracy |
± 2.0 x 10 -6 |
Aging |
± 1.0 x 10 -6/year |
Amplitude |
1.65 V |
Jitter (rms) |
< 20 ps |
Power |
Source Voltage and Frequency |
100 to 240 VAC ±10 % @ 45-66 Hz |
Max Power Consumption |
100 W |
Environmental Characteristics |
Temperature (operating) |
+5 °C to +40 °C (+41°F to 104 °F) |
Temperature (non operating) |
-20 °C to +60 °C (-4 °F to 140 °F) |
Humidity (operating) |
5 % to 80 % relative humidity with a maximum wet bulb temperature of 29 °C at or below
+40 °C, (upper limit de-rates to 20.6 % relative humidity at +40 °C . Non-condensing. |
Humidity (non-operating) |
5 % to 95 % relative humidity with a maximum wet bulb temperature of 40 °C at or below
+60 °C, (upper limit de-rates to 29.8 % relative humidity at +60 °C. Non-condensing. |
Altitude (operating) |
3,000 meters (9,842 feet) maximum at or below 25 °C |
Altitude (non operating) |
12,000 meters (39,370 feet) maximum |
EMC and safety |
Safety |
EN61010-1 |
Main Standards |
EN 61326-1:2013 - Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 1: General requirements |
Immunity |
EN 61326-1:2013 |
Display |
7 inch, 1024 x 600, capacitive touch LCD |
Operative System |
Windows 10 |
External Dimensions |
W 445 mm - H 135 mm - D 320 mm (3U 10″ rackmount) |
Weight |
6.25 kg |
Front panel connectors |
CH1 and CH2 Outputs (BNC)
MARKER N OUT (BNC)
TRIGGER IN (BNC)
2 USB 3.0 ports |
Rear panel connectors |
Ref. Clk. IN (SMA)
Ref. Clk. Out (SMA)
External Monitor ports
DIGITAL POD A [7..0]
1 USB 2.0 ports or more
Ethernet port (10/100/1000BaseT Ethernet, RJ45 port)
2 PS/2 keyboard and mouse ports |
Hard Disk |
240 GB SSD or better |
Processor |
Intel® Celeron J1900, 2 GHz (or better) |
Processor Memory |
4 GB or better |