| HDMI |
| Version |
HDMI 2.0 |
| Standard Formats |
VESA (DMT, CVT-R, CVT), CEA |
| Connector |
(1) Type A 280G; (1) Type A 280A |
| Protocol |
HDMI, DVI |
| Video Colorimetry |
ITU-R BT.601-5, ITU-R BT.709-5, BT.2020 (Rx only) |
| Video Max Pixel Rate |
18G bps data rate; 600 MHz pixel rate (upscaled from 1080p) |
| Video Encoding / Sampling |
RGB, YCbCr; 4:4:4, 4:2:2, 4:2:0 |
| HDCP |
Versions 1.4 & 2.2 |
| Audio Formats |
2Channel LPCM |
| HDBaseT |
| Version |
HDBaseT 1.0 |
| Standard Formats |
VESA (DMT, CVT-R, CVT), CEA |
| Connector |
(1) 8P8C (RJ-45) Tx; (1) RJ-45 Rx |
| Video Colorimetry |
ITU-R BT.601-5, ITU-R BT.709-5 |
| Video Max Pixel Rate |
300 MHz; NEW! Supports Long Reach mode |
| Video Encoding / Sampling |
RGB, YCbCr; 4:4:4, 4:2:2, 4:2:0 |
| HDCP |
Versions 1.4 & 2.2 |
| Audio Formats |
2Channel LPCM |
| Tests Supported |
| - Video Format Test |
Select from common standard CEA and VESA formats |
| - Video Pattern Test |
Select from several test patterns; patterns above 1080p are up-scaled to 4K |
| - Hot plug detect |
Check hot plug voltage from connected sink (e.g. UHD TV) |
| - HDCP active |
Verify HDCP; select version 1.4 or 2.2 |
| - EDID Test |
View summary of EDID contents of connected sink or entire downstream network |
| - HDR Test |
Verify that HDR metatdata is transmitted through the network |
| - Audio Test |
Generate LPCM audio test tone to check continuity end-to-end |
| - Video Format |
Test Verify incoming video timing from a UHD source |
| - Video Test |
View incoming video on embedded screen; view pixel values up to 150MHz pixel rate |
| - +5V |
Check +5V from a UHD source |
| - HDCP Active |
Verify HDCP operation; version 1.4 or 2.2 |
| - EDID Test |
Emulate EDIDs to test response of source or entire upstream network |
| - HDR Test |
NEW! Verify that HDR metatdata is transmitted through the network |
| - Link / Cable |
Test Test HDMI or HDBaseT cable runs |
| - Audio Test |
Verify LPCM audio end-to-end |
| Instrument (each unit) |
| AC Adapter/Charger |
100-120 VAC, 47-63Hz |
| Battery |
Minimum 4 hours continuous use on 8 hour charge |
| Micro SD Card Slot |
For saving and retrieving test reports, EDIDs and software upgrade files |
| LCD Display |
480 (H); x 272 (V) resolution; 4.3” diagonal |
| Weight (each unit) |
0.95 LBS (0.358 Kg) |
| Size (each unit) |
Height: 7.1 in. (18.04 cm) Width: 7.4 in. (18.79 cm) Depth: 1.25 in. (3.18 cm) |
| Environmental |
Operating Temp: 32 to 104 (F); 0 to 40 (C) |