| Definition |
| Protocol Setup |
Select LIN Version 1.3, 2.x, or SAE J2602.
Select BitRate (1.2, 2.4, 4.8, 9.6, 10.417, 19.2 kb/s, or user-defined 1-20 kb/s)
Decodes LIN messages on busses with mixed LIN Versions. |
| Decode Capability |
| Format |
Hexadecimal |
| Decode Setup |
Threshold definition required. Default is to Percent amplitude. Select BitRate. |
| Decode Input |
Any analog Channel, Memory, or Math trace. |
| # of Decode Waveforms |
Up to 4 busses may be decoded at one time. In addition, zooms can be displayed (with decoded information). |
| Location |
Overlayed over DATA waveform, on Grid. (Note: Use multi-grid if there is more than one decoder ON) |
| Visual Aid |
Color Coding for Start Bit, Stop Bit, Parity Bit, and DATA. Decode information is intelligently annotated based
on timebase setting. |
| Trigger Capability |
| Format |
Hexadecimal |
| Trigger Setup |
Trigger on (Sync) Break (Start of Message), Frame ID, Frame ID+DATA, Error Frame (Any combination of Checksum, Header
Parity, or Sync Byte error frames) |
| ADDRESS (ID) Condition Setup |
Specify one ADDRESS with condition of = |
| DATA Condition Setup |
<=, <, =, >, >=, <>, in range, out of range, don’t care. |
| DATA Setup |
Hexadecimal: # Data Bytes = 0 to 8. Data can be defined by nibble. Triggers on that data pattern regardless of position or in
user settable location. |
| Bit Rates |
1.2, 2.4, 4.8, 9.6, 10.417, 19.2 kb/s selectable. Any value from 1 kb/s to 20 kb/s may be entered. |
| Trigger Input |
Any analog Channel or the EXT input. |
| Trigger Design |
Internal to oscilloscope, settable like any other oscilloscope trigger. |
| Search Capability |
| Pattern Search |
Search by Next Frame, Next ID in Hexadecimal format, or Next Error Frame. |
| Other |
| Compatible With … |
LINbus TD is compatible with WaveSurfer MXs-B and MSO MSXs-B, HDO4000, WaveRunner Xi-A and 6 Zi, HDO6000,
WavePro 7 Zi/Zi-A, WaveMaster 8 Zi/Zi-A, Labmaster 9 Zi-a and LabMaster 10 Zi oscilloscopes. |