Teledyne LeCroy HDO4K-I3CBUS TD - I3C Trigger and Decode Option for HDO4000

Name: Teledyne LeCroy HDO4K-I3CBUS TD - I3C Trigger and Decode Option for HDO4000
Brand: Teledyne LeCroy
SKU: LeCroyHDO4K-I3CBUS TD
Price: 1740.00 USD
Availability: InStock

0 reviews | Catalog: HDO4K-I3CBUS TD | Model: Teledyne LeCroy HDO4K-I3CBUS TD

Compare

I3C Trigger and Decode Option for HDO4000

Supports triggers in SDR, HDR-DDR, and Legacy I2C operating modes
Provides triggering in “ANY” supported operating mode
Provides for complex triggering with defined Address, R/W (direction), Common Command Code, and Data.
Conditional data definition (<, <=, =, >, >=, <>, INRANGE, OUT of RANGE).
Use analog or digital (MSO) inputs for acquisition and triggering.

View Product Details

Your Price: $1,740.00

In Stock:

Request a Demo

View Payment Options

Request Quote

Recommended for you

Teledyne LeCroy HDO4K-I3CBUS TD I3C Trigger and Decode Option for HDO4000

I3C Trigger and Decode Option

Supports triggers in SDR, HDR-DDR, and Legacy I2C operating modes
Provides triggering in “ANY” supported operating mode
Use analog or digital (MSO) inputs for acquisition and triggering.

The LeCroy HDO4K-I3CBUS TD is an I3C Trigger and Decode option for HDO4000. The I3C Trigger+Decode option provides high performance triggers and transparent color-coded decode overlays, protocol tables, and search capabilities. Easily correlate I3Cbus traffic to other signals in mobile, handheld, and battery-powered embedded systems.

Comprehensive and Powerful I3C Trigger ("T")

Capability is provided to permit triggering on any MIPI-defined allowable command sequence, and also on user-defined command sequences, with full capability to define specific data values or ranges of data values.

Conditional DATA Trigger Setup ("T")

The trigger permits a conditional (<. <=, =, >, >=, <>, inside a range, outside a range) setup for the DATA condition. This is especially useful in situations where abnormal events should be monitored.

Intuitive, Color-coded Decode Overlays ("D")

A transparent overlay with color-coding for specific portions of each protocol and the entire message frame makes it easy to understand your serial data information. Unlike other solutions, with protocol decode information away from the signal, our solution correlates the waveform and the protocol decode directly on the display. As the acquisition length is expanded or shortened, the decode overlay will adjust to show you just the right amount of information.

Interactive Table Summarizes Results ("D")

Turn the oscilloscope into a protocol analyzer with a tabular display of decoded information. Customize the table to show only the data of interest and touch a message in the table to automatically zoom to it and display it on the screen. Export the table for offline analysis. Up to four different decoded signals of any type may be simultaneously displayed in the table.

I3Cbus TD and I3Cbus TDME Specifications
Definition
Source Setup	Select Source for Clock and Data.
Trigger Capability
Format	Hexadecimal or Binary. ADDRESS and DATA can be set up with different formats.
Trigger Setup	Select from operating modes to trigger on the following: SDR: Start (S), Stop (P), Restart (SR), Direct Frame, Broadcast Frame, SDR Frame Length, Direct Address + CCC + Data, Broadcast Address + CCC + Data, SDR Errors HDR-DDR: Enter, Exit, Restart, Frame Length, Address + Cmd + Data, Preamble, Errors I2C Legacy: START, ReSTART, STOP, Missing ACK, ADDR, DATA, ADDR+DATA, ADDR+DATA FRAME LENGTH, EEPROM DATA TRANSFER Any Mode: Start (S), Stop (P), Restart( SR), Frame Length, Any Address + Data, Any Errors
ADDRESS Setup	Specify one ADDRESS with condition of “=”. 7 or 10 bit ADDRESS supported with full Read, Write, or R/W=”Don’t Care” selectability on both 7 and 10 bit ADDRESSes. Choose to Trigger on address values that include/don’t include R/W bit in address value.
DATA Setup	Direct Address + CCC + Data, Broadcast Address + CCC + Data, ADDRESS+DATA, Any Address + Data, and HDR-DDR Address Direct Address + CCC + Data, Broadcast Address + CCC + Data, ADDRESS+DATA, Any Address + Data, and HDR-DDR Address + Cmd + Data Trigger Types: Hexadecimal: # Data Bytes = 0 to 12. Data can be defined by nibble. Binary: Any combination of 0,1, or X for 1-96 bits Data pattern can be set to start at any location in the 12 Byte / 96 bit sequence.
DATA Conditions	<=, <, =, >, >=, <>, IN RANGE, OUT OF RANGE, or DON’T CARE
ACK Conditions	For any Direct Address + CCC + Data, Broadcast Address + CCC + Data, HDR-DDR + Cmd + Data, Addr + Data, or Any Addr + Data setup, select an ACK Condition of ACK, NO ACK, and DON’T CARE.
Bit Rates	Full range of speeds for I3C specification for SDR, HDR-DDR, and I2C Iegacy operation modes.
Trigger Input	Any analog Channel or Digital input, or the EXT input. Clock may be input to EXT to conserve available analog Channels.
Decode + Search Capability
Format	Hexadecimal, Binary, ASCII
Decode Setup	Threshold definition required. Defavult is to Percent amplitude. Choose to Decode address values including/not including the R/W bit in address value.
Decode Input	Any analog Channel, Memory or Math trace, and any Digital trace. Clock channel may be turned OFF and data will still decode (reduces screen clutter).
# of Decodes	Up to 4 buses may be decoded at one time. In addition, zooms can be displayed (with decoded information).
Visual Aid	Color Coding for FRAME, START/ReSTART bit, ADDR, R/W, DATA, ACK, NACK, and STOP bit. Decode information is intelligently annotated based on timebase setting, and overlaid on acquired waveform.
Table Configure, Export Table	Display 1 to 20 rows of decoded information for up to 4 different protocols or decodes in time order in a single table. Displayed information includes Index, Timestamp, and other various protocol-specific information. Table permits scrolling, touch to zoom, export to .csv file, and special display of long data or other patterns.
Pattern Search	Search for Previous or Next ADDRESS, PACKET, or DATA in hexadecimal format.