| |
DigRF 3G Decode |
DigRF v4 Decode |
| Definition |
| Protocol Setup |
Select Data source |
Select Data source |
| Decode Capability |
| Format |
Hexadecimal |
Hexadecimal |
| Decode Setup |
Threshold definition required. Default is to
Percent amplitude
Choose Speed-mode: Low (6.5 Mb/s), Medium (26 Mb/s)
or High (312 Mb/s)
Probing setup: Differential or Single-ended |
Probing and threshold definition required.
Probing setup: One diferential or two single ended.
Voltage Level: 0V default
Hysteresis: 53mV default
Select Speed-mode: Low (26 Mb/s), Medium (1248 Mb/s),
High(1456 Mb/s)
Select IQ Period: 2G (541.66 KHz), 3G (7.68 MHz), LTE (1.4
MHz), LTE (3 MHz), LTE (5 MHz), LTE (10 MHz), LTE (15
MHz), LTE (20 MHz)
Select IQ format: Standard or Custom
Select RF Path: Main or Diversity |
| Decode Input |
Any analog Channel, Memory or Math trace
Select Start Pattern |
Any analog Channel, Memory or Math trace. |
| # of Decode Waveforms |
Up to 4 buses may be decoded at one time. In addition,
zooms can be displayed (with decoded information) |
Up to 4 buses may be decoded at one time. In addition,
zooms can be displayed (with decoded information) |
| Location |
Overlayed over DATA waveform, on Grid. (Note: Use
multi-grid if there is more than one decoder ON) |
Overlayed over DATA waveform, on Grid.
(Note: Use multi-grid if there is more than one
decoder ON) |
| Visual Aid |
Color Coding for Frame, Break, Synch, ID, ID Parity, Data,
CRC. Decode information is intelligently annotated based
on time base setting |
Color coding for start of frame (Sof), cyclic running index
(CRI), DCL, Tx Interface control logic (TICLC), Data, CRC,
End of frame (EoF). Decode information is intelligently
annotated based on timebase setting |
| Search Capability |
| Pattern Search |
Message, Time, Sync, LCTS, CTS/RTI, TxRx, Word Name,
Comment, Payload Size, Payload, I Data, Q Data,
Frame, Attributes |
MIPI DigRF v4, Time, Syncg, Sof, LCTS, CRI, TxRx, Word
Name, Comment, Size, Payload, I Data, Q Data, Frame,
Attributes, Header Type, RTI CRC, EoF |
| Other |
| Compatible With… |
Compatible with WaveMaster® 8 Zi/Zi-A, WavePro® 7
Zi/Zi-A, WaveRunner® 6 Zi , WaveRunner® Xi/Xi-A,
WaveSurfer® Xs/Xs-A oscilloscopes and analyzers based
on these platforms. Bandwidth recommended to be equal
o or greater than the DigRF 3G Mb/s data rate, with a
minimum oscilloscope sample rate requirement of 4x the
data rate |
Compatible with WaveMaster® 8 Zi/Zi-A, WavePro® 7
Zi/Zi-A, WaveRunner® 6 Zi , WaveRunner® Xi/Xi-A,
WaveSurfer® Xs/Xs-A oscilloscopes and analyzers based
on these platforms. Bandwidth recommended to be equal
to or greater than the v4 Mb/s data rate, with a minimum
oscilloscope sample rate requirement of 4x the data rate |