USB Power Sensor (10 MHz to 6 GHz; -30 to +44 dBm)
The U2000 Series enable simpler, lower-cost power measurements versus conventional power meter and sensor combinations. With nine high-performance models, the U2000 Series USB power sensors offer compact, high-performance solutions for today’s CW and modulated signals.
Models | Description | Power Range | Connector Type |
U2000A | 10 MHz to 18 GHz USB sensor | -60 to +20 dBm | N-type male, 50 Ω |
U2000B | 10 MHz to 18 GHz USB sensor | -30 to +44 dBm | N-type male, 50 Ω |
U2000H | 10 MHz to 18 GHz USB sensor | -50 to +30 dBm | N-type male, 50 Ω |
U2001A | 10 MHz to 6 GHz USB sensor | -60 to +20 dBm | N-type male, 50 Ω |
U2001B | 10 MHz to 6 GHz USB sensor | -30 to +44 dBm | N-type male, 50 Ω |
U2001H | 10 MHz to 6 GHz USB sensor | -50 to +30 dBm | N-type male, 50 Ω |
U2002A | 50 MHz to 24 GHz USB sensor | -60 to +20 dBm | 3.5 mm male, 50 Ω |
U2002H | 50 MHz to 24 GHz USB sensor | -50 to +30 dBm | 3.5 mm male, 50 Ω |
U2004A | 9 kHz to 6 GHz USB sensor | -60 to +20 dBm | N-type male, 50 Ω |
Compact “power meters”, simple set-up
The U2000 Series are standalone sensors. That means they essentially operate like power meters, just in smaller forms. No reference calibrator is required. The fact that each sensor draws minimal power from a USB port and that it doesn’t need additional triggering modules or power adaptors to operate makes it more portable, especially for base station testing. Setting up is easy: just plug it into the USB port of your PC or laptop or even select a network or handheld spectrum analyzer and start your power measurements. The figure below illustrates the very simple, straightforward setup of the U2000 Series.