THIS OPTION REQUIRES OPTIONS 233 (SPECTRUM ANALYSIS) AND 307 (GPS RECEIVER). OPTION 235 (PRE-AMPLIFIER) IS RECOMMENDED.

Option 377 is the Over-the-Air (OTA) 5GTF option for the Field Fox analyzer.

• Characterize air interface path loss and beam coverage
• Verify the quality of the network and beam performance
• Measure and decode primary synchronization signal (PSS), secondary synchronization signal (SSS), beam indexes, cell ID, and various signal quality metrics
• Identify frequency drifting, isolate power issues, investigate performance problems, and verify Inter-RAT handovers

• Recommend 32, 44, or 50 GHz FieldFox model (N995xA and N996xA) to support 5GTF FR2 frequency of 28 GHz.
• FieldFox models 26.5 GHz and below will require an external mixer to down-convert millimeter wave frequency to intermediate frequency (IF). The mixer is orderable as Keysight model N9910XM28-H2A for 3.5 mm test ports or N9910XM28-H2N for Type-N test ports