FieldFox Handheld Microwave Signal Analyzer (18 GHz)
The Keysight N9937B is a FieldFox handheld signal analyzer. The standard model has a frequency range of 9 kHz – 18 GHz (useable to 5 kHz) and the following functionalities:
- Basic spectrum analysis, four traces, different detector types, radio standard selection, limit lines
- Channel power, occupied bandwidth, adjacent channel power, spectrum emission mask
- AM/FM tune and listen, field strength measurements, antenna factors, frequency counter marker
In microwave, radar, satellite communications, and commercial microwave backhaul, you may be responsible for hardware installation and maintenance as well as over-the-air signal quality. This could require regular monitoring for unexpected signals and performing signal surveillance.
FieldFox’s spectrum analyzer will excel in a dynamic spectral environment. You may face measurement challenges such as the need to detect a low level signal under strong signal conditions (requiring high dynamic range), or close-in small interference signals (requiring excellent phase noise).
FieldFox’s superior dynamic range (TOI +15 dBm), close in phase noise (-117 dBc/Hz at 10 kHz offset), and fast sweep time make these challenging tasks easier. FieldFox’s spectrum analyzer also provides a full power measurement suite and complete trace and state control.
For information on the other analyzer models in the Field Fox series, please see the selection information further below on this page.
Information on Options
Field Fox “B” series signal analyzers are easily customized to your specific application with over twenty software options. For detailed information regarding options, please view this document beginning on page 11.
Further information on software features can also be viewed in the FieldFox software guide.
Options can be added to your order from the accessories section on the left side of this page.
Available options include:
- Pre-amplifier and tracking generator
- Over-the-Air (OTA) LTE FDD, LTD TDD, 5G TF, 5G NR
- Extended range transmission analysis (ERTA)
- Interference analysis and spectrogram
- Power sensor support
- I/Q analysis and streaming