THIS OPTION REQUIRES OPTION 220; OPTION 307 IS RECOMMENDED (BOTH SOLD SEPARATELY) 

TWO FIELD FOX UNITS ARE ALSO REQUIRED.

Extended Range Transmission Analysis (ERTA) or Option 209 is a scalar measurement system based on the use of two (2) FieldFox units. One FieldFox acts as the source and reference receiver, while the second FieldFox acts as the measurement receiver. When different frequency models are used in an ERTA pair, the ERTA system frequency range is limited to the lowest of the pair.

ERTA can be used to measure the scalar transmission gain or loss of an RF system. It is useful when measuring long lossy cables where the two ends cannot easily be brought together, such as those bolted in on ships or aircraft. It is also useful in measuring the insertion loss of waveguide systems or using the frequency-offset feature, devices such as mixers and converters.

ERTA measurements are based on two FieldFox units, one at each end of the measured DUT. One FieldFox is the source and reference receiver (R), while the other is the measurement receiver (B). The two FieldFox units are synchronized using hardware triggering. By taking advantage of FieldFox’s InstAlign technique, ERTA can be used to make accurate gain or loss measurements.