• Voltage: 8V
• Current: 400A
• Power: 3200W
• INPUT VOLTAGE MUST BE SELECTED – 208V three-phase or 230V single phase
• Please indicate input voltage in the order notes during checkout

The Keysight N8700 Series ATE system power supply delivers high current with low noise in a compact two-unit package. Airflow moves front to back, so no additional space is required above or below the power supply in your automated test equipment (ATE) rack. This series of programmable power supplies sources up to 3300 or 5200 W. Get output voltages from 8 to 600 V and 5.5 to 400 A.

The N8700 models offer flexible AC input voltage options.

Every N8700 model can be purchased with a 208V 3-phase input. The 3.3 kW models have the additional option of a 230V single-phase AC input voltage. Please refer to the right column of the chart below for the designation of 3.3 kW or 5 kW.

• 3.3 kW single phase orders include options N8731A-230 and N8731A-831
• 3.3 kW three phase orders include options N8731A-208 and N8731A-861
• 5 kW three phase orders include options N8751A-208 and N8751-861

If purchasing a 3.3 kW model, please indicate your voltage selection in the order notes section during checkout: 208V three-phase or 230V single-phase AC input.

Please note, cords do not contain a plug.

AC input voltage cannot be changed without returning the unit to Keysight.

You can quickly and easily operate the power supply with its rotary knobs and buttons. Using the front panel controls, you can make coarse or fine adjustments of output voltage and current, protection settings, and set power-on states (last setting memory or factory default setting). The output voltage and current are displayed simultaneously, and LED indicators show power supply status and operating modes. You can lock the front panel controls to protect against accidental power-supply parameter changes.

To safeguard your device from damage, the N8700 Series power supplies provide over-temperature, over-current and over-voltage protection (OVP) to shut down the power supply output when a fault condition occurs. They also offer an under-voltage limit (UVL) that prevents adjustment of the output voltage below a certain limit. The combination of UVL and OVP capabilities lets you create a protection window for sensitive load circuitry.

The N8700 Series power supplies comes standard with GPIB, Ethernet/LAN, and USB 2.0 interfaces giving you the flexibility to use your I/O interface of choice today and safeguard your test setup for the future. The N8700 is fully compliant with the LXI Class C specification.

The built-in Web server provides remote access and control of the instrument via a standard browser. This control goes above and beyond the LXI specification, giving users the ability to monitor and control the instrument from anywhere. Using the Web browser, you can set up, monitor and operate the N8700 remotely.

Should you need greater output power, the N8700 series power supplies give you the flexibility to connect in parallel up to four identical units (same model number) for greater output current or connect two identical units (same model number) in series for greater output voltage (see output terminal isolation information).

The rack mount ears and handles are provided standard with every unit. In addition, the N5740A rack mount slide kit makes it easy to integrate an N8700 into a test rack by providing all the necessary hardware to rack mount an N8700 series power supply in only 2 U of rack space. The N5740A rack mounts slide kit is the same kit used with the N5700 series.

Shown with 230 V single-phase AC input voltage option, available on 3.3 kW models only