Keysight N2790A/N2791A/N2891A High-Voltage Differential Probes
Oscilloscope users often need to make floating measurements where neither point of the measurement is on earth ground. Use the Keysight N2790A, N2791A, or N2891A high-voltage differential probe to make safe and accurate floating measurements with an oscilloscope. The N2790A, N2791A, and N2891A high-voltage differential probes allow conventional earth-grounded Keysight Technologies, Inc. oscilloscopes to be used for floating signal measurements.
With a differential amplifier in the probe head, the N2790A is rated to measure differential voltage up to 1,400 VDC + peak AC with a high CMRR of > 50 dB at 1 MHz. The N2791A and N2891A can measure differential voltage up to 700 V and 7 kV differential or common-mode respectively. The N2790A, N2791A, and N2891A differential probes offer sufficient dynamic range and bandwidth for your application to make the floating measurements found in power electronics circuits safely and accurately.
The Keysight N2790A, N2791A, and N2891A differential probe offer user-selectable attenuation settings that make it highly versatile, allowing it to be used for a broad range of applications. The probe comes with tip accessories for use with both small and large components in tight places. The N2790A and N2891A also have an over-range indicator that alerts the user when the probe input exceeds the dynamic range of the probe.
The N2791A and N2891A are compatible with any oscilloscope with 1 Mohm BNC input. The N2791A and N2891A probe’s power is supplied by included 4x AA batteries or USB host port of the scope or PC via a supplied USB power cable. The N2790A is compatible with the Keysight Technologies, Inc. AutoProbe interface where the probe’s power is supplied by the Keysight oscilloscope’s probe interface.
See Data Sheet in the Documents section for specifications.
Keysight N2790A
Use the Keysight N2790A 100-MHz high-voltage differential probe to make safe and accurate floating measurements with an oscilloscope. The N2790A probe allows conventional earth-grounded Keysight oscilloscopes to be used for floating signal measurements of up to 1,400 V of differential voltage and 1,000 V of common-mode voltage. Thanks to its high bandwidth and excellent input-impedance characteristics, the probe can accurately measure up to 3.5 sec of fast transient edges in modern switching power supplies. The probe is compatible with Keysight’s AutoProbe interface with 1 Mohm input where the probe’s power is supplied by the Keysight oscilloscope’s probe interface.
When probing differential signals inside of environmental chambers at extreme temperatures, Keysight offers the N7013A extreme temperature extension kit. The N7014A is compatible with the N2790A with a de-rated bandwidth of 70 MHz. The 70 cm long differential cable set and accessories can operate in temperatures ranging from -40 degrees to +85 degrees Celsius.