CHANNELS 1–32: |
Multiplex one of 32 2-pole or one of 16 4-pole signals into DMM. Configuration supports dual 1×16 independent multi plexers. |
INPUTS |
MAXIMUM SIGNAL LEVEL: |
Any channel to Any Channel (1–32):150V DC or 150Vrms (212V peak) for AC waveforms, 1A switched, 60W, 125VA maximum. |
SAFETY: |
Conforms to European Union Directive 73/23/EEC EN61010-1, CAT I |
CONTACT LIFE (typ.): |
>105 operations at max. signal level.
>108 operations no load 1 |
1 Minimum signal level 10mV, 10µA. |
CONTACT RESISTANCE: |
<1Ω any path and additional 1Ω at end of contact life |
CONTACT POTENTIAL: |
<6µV per contact pair. |
OFFSET CURRENT: |
<100pA |
CONNECTOR TYPE: |
50-pin female D-shell, Channels 1–24.
25-pin female D-shell, Channels 25–32
Supplied with male IDC ribbon cable connectors. |
ISOLATION BETwEEN ANY TwO TERMINALS: |
>1010 Ω, <100pF |
ISOLATION BETWEEN ANY TWO TERMINALS: |
>10 9 Ω, <200pF. |
ISOLATION BETWEEN ANY TERMINAL AND EARTH: |
>10 9 Ω, <400pF. |
CROSS TALk (1MHz, 50Ω Load): |
<–35dB |
INSERTION LOSS (50Ω Source, 50Ω Load): |
<0.35dB below 1MHz. <3dB below 2MHz |
COMMON MODE VOLTAGE: |
300VDC or 300Vrms (425V peak) for AC waveforms between any terminal and chassis |
ISOLATION BETWEEN ANY TERMINAL AND EARTH: |
>109 Ω, <200pF |
INSERTION LOSS (50Ω Source, 50Ω Load): |
<0.35dB below 1MHz. <3dB below 2MHz. |
COMMON MODE VOLTAGE: |
300VDC or 300Vrms (425V peak) for AC waveforms between any terminal and chassis. |
General |
32 CHANNELS: |
32 channels of 2-pole relay input. All channels configur a ble to 4-pole |
RELAY TYPE: |
Latching electromechanical. |
ACTUATION TIME: |
<3ms |
FIRMWARE: |
Specified for Model 2700 rev. A01, 2701 rev. A01, and 2750 rev. A01 or higher. |
DMM CONNECTIONS: |
Screw terminals provide internal DMM connections to channels 34 and 35 and connections to external wiring access. |
ENVIRONMENTAL |
OPERATING ENVIRONMENT: |
Specified for 0°C to 50°C
Specified to 50% R.H. at 35°C |
STORAGE ENVIRONMENT: |
–25°C to 65°C |
WEIGHT: |
<0.52kg (1.16 lb). |