• pH resolution to 3 decimal places
• Simultaneous readout of pH and temperature
• 1, 2 or 3 point calibration
• Automatic or manual buffer selection
• Storage of up to 32 results

3510 pHmV meter supplied with glass combination pH electrode (924 005), electrode stand and holder, ATC probe (027 500), BNC shorting plug, pH 4, 7 and 10 buffers 230v.

The 3510 is a versatile, simple to use pH, mV and temperature meter that is ideal for routine analysis. With up to three decimal place resolution and a choice of up to three calibration points the 3510 provides the user with added flexibility where future demands for enhanced performance may be required. A choice of pH calibration buffers to DIN, JIS and NIST standards can be used for automatic calibration, as well as manually entered buffer values. The pH measurement meter also has the ability to store up to 32 results.

1. Ref Socket 2mm pin socket. Connection socket for separate reference electrode. When performing measurements with some pH and ion selective electrodes a separate reference electrode is needed.

2. pH Socket BNC type socket which allows combination pH or redox electrodes to be used.

3. Temp Socket 8 pin mini-DIN socket. This allows the Automatic Temperature Compensation (ATC) probe (027 500) to be connected.

4. Analog Out 2 x 4mm sockets. Analogue output (buffered electrode potential).

5. Output Socket 9 way socket for RS232 connection.

6. Power In AC 9V I/P socket. 2.1 x 5.5mm socket allowing the power supply to be connected to the instrument.