Master Telecom Installer's Kit in X-tra Rugged Rota-Tough Case
The Jensen Tools JTK-51 is a master telecom installer's kit in X-tra rugged Rota-Tough case. It includes a cable cutter, Paladin three blade coaxial cable stripper, Jensen 110 punch down tool, tone generator, tone tracer and crimper frame with RJ-11, RJ-45, BNC 58, 59, 62 die sets and pallet. Pallet is also available without tools.
Kit Contents:
- 1 x General Tools 131 Screwdriver Reamer 3/8" Cap 6 1/2" OAL
- 1 x Ideal 31-033 B, Spring Steel Fish Tape, 50' long
- 1 x Techni-Pro 191-225 Adjustable Wrench, 4", 11/16" Jaw Opening
- 1 xTechni-Pro G262P-NP Slip Joint Pliers, 6-1/2", 1-5/16" Jaw Opening
- 1 x Techni-Pro 191-227 Adjustable Wrench, 8", 1-3/16" Jaw Opening
- 1 x Ullman Devices 17-B/17 4-Prong Retrievers
- 1 x Irwin 502L3 Locking Plier Curved Jaw, 10" w/cutter
- 1 x Techni-Pro 758SC313 Double-Ended Nylon Screw Starter, 9"
- 1 x Techni-Pro 191-207 Scratch Awl 8"
- 1 x Abatix CRW2220 Safety Goggles with Clear Lens and Perforated Sides
- 1 x Stanley 15-113 High Tension Hacksaw 12"
- 1 x Techni-Pro M330027E.80616 Stamped Steel Crimper/Stripper
- 1 x Techni-Pro JEN5 File Set, 3 Pieces
- 1 x Stanley 66-092 Screwdriver, Slotted, 3/8" Tip, 8" Shank, Black Oxide, Vinyl Grip, Steel, Yellow
- 1 x Grobet 37.793 #3 METAL FERRULED FILE H ANDLE 37.793
- 1 x Stanley 66-091 5/16" x 6" Vinyl Grip Round Blade Screwdriver
- 1 x Stanley 15-090 COMPASS SAW SET STANLEY 15-090 STANLEY
- 1 x Stanley 66-090 Vinyl Grip Standard Blade Standard Tip Screwdriver, 1/4" x 4"
- 1 x Stanley 33-428 26"/8m Powerlock Tape, 1" wide blade
- 1 x Stanley 66-088 1/4" Slotted Stubby Cushion-Grip Screwdriver
- 1 x Techni-Pro 1-001/5016 Chain Nose Pliers with Cutter
- 1 x Stanley 65-902 #2 Phillips Cushion-Grip Screwdriver
- 1 x Techni-Pro 1-005/5002 Diagonal Cutting Pliers 5-1/4" Long
- 1 x Stanley 65-901 #1 Phillips Cushion-Grip Screwdriver
- 1 x Techni-Pro 1-010/G271P-NP 10" Long Groove Joint Pliers with 1-1/2" Capacity
- 1 x Stanley 65-905 #2 Stubby Cushion Grip Screwdriver
- 1 x Fulton 902-IB Industrial Model Flashlight
- 1 x Proto 66-097 3/16" Slotted Cushion-Grip Screwdriver
- 1 x Jensen Tools 181410-2B-531 X-Tra Rugged Rota-Tough Case, 10" Deep
- 1 x Proto J1222ASD Wrench Combo 11/16" 12pt
- 1 x Techni-Pro 758PL214 Lineman's Pliers NE-style 9"
- 1 x Proto J1216ASD WRENCH COMBO 1/2 12PT 8"L J1216ASD PROTO
- 1 x Stanley 64-100-A #0 Phillips Screwdriver - Pocket Clip Style
- 1 x Proto J1208A Combination Wrench1/4 In.SAE 12 Pt.
- 1 x Stanley 66-102-A 3/32" Slotted Screwdriver - Pocket Clip Style
- 1 x Proto J1212ASD Combination Wrench3/8 In.SAE 12 Pt.
- 1 x Mayhew 21703-949 Pin Punch 1/8"
- 1 x Proto J1210A WRENCH 5/16"COMBO
- 1 x Mayhew 21701-949 Pin Punch 1/16"
- 1 x Proto J1220ASD Wrench Combo 5/8 12PT PROTO
- 1 x Mayhew 24303-949 Center Punch
- 1 x Proto J1214ASD Wrench Combo 7/16" 12PT
- 1 x Weller-Xcelite THS8N Xcelite Full Hollow-Shaft Nutdriver 1/4"
- 1 x Proto J1218ASD Combination Wrench9/16 In.SA E12 Pt.
- 1 x Weller-Xcelite HS10 Xcelite Full Hollow-Shaft Nutdriver 5/16"
- 1 x Eazypower 81964 Push Pull Click Click Screwdriver/Drill Kit with 1/4-Inch Hex, 1 Power Bits and Hex drive Drill Bits
- 1 x Driver nut 1/2"
- 1 x Weller-Xcelite HS12N Xcelite Full Hollow-Shaft Nutdriver 3/8"
- 1 x Etcon CT102 Receptacle Tester
- 1 x Stanley 51-505 FATMAX® Curved Claw Graphite Hammer 16 oz
- 1 x Jensen Tools 07-00-005265 Top Side Hinge Pallet f/JTK-51. Empty, 17.75 x 14.5"
- 1 x Weller-Xcelite HS14N Xcelite Full Hollow-Shaft Nutdriver 7/16"
- 1 x Techni-Pro 902-319custom Combo Knife and Screwdriver