JBC RMVE-2QE - Complete Rework System (REQUIRES SHOP AIR), 230 Volt Version

The JBC RMVE-2QE is a complete rework system, with soldering, desoldering and hot air functionality. The RMVE-2QE includes the DDE two channel control unit, JTSE hot air station, as well as a T245-A iron, DR560-A desoldering iron, and JT-TA hot air iron. Please note, tips are sold separately. For a complete list of included products, please see the tab labeled "What's in the Box."

***This package does NOT have electric pump - it requires shop air. If you do not have shop air in your facility, please see the RMSE-2QE.***

DDE - 2 Channel Control Unit

The JBC DDE-1C is a two channel soldering station. Compatible with a wide variety of tools, the DDE-1C offers a peak power of 150 watts, and channels which can be used simultaneously. This station is a JBC Excellence range product, offering benefits such as station customization, full control of soldering processes and remote work management.

The Most Efficient Soldering System

The system recovers tip temperature extremely quickly. This increases work efficiency and lowers the soldering temperature.

JBC heating system principles

• The compact element optimizes heat transfer by reducing the thermal barriers.
• The fully integrated thermal sensor to the heater ensures an extremely quick temperature recovery.
• The intelligent algorithm used in the heating control system increases performance

JBC system can reach 350°C (662°F) in only 2 seconds, while others need between 10 and 90 seconds.

JBC, the most efficient soldering process

• This innovative technology allows a reduction of the temperature by at least 50°C.
• Lowering the temperature reduces the risk of damaging components and improves the quality of soldering and desoldering.

JBC stations only drop 20°C (68°F) where others drop as much as 70°C (158°F)

The Intelligent Heat Management

Thanks to automatic detection of the tool in the stand, JBC Soldering and Rework Stations are able to make the tools entering in Sleep & Hibernation mode when not being used. 

As a result, tip life lasts up to 5 times longer than with conventional systems.

Sleep Mode

Sleep mode automatically lowers tip temperature below solder melting point when the tool rests in the stand. It prevents the dissolution of tips iron coating into molten solder.

Hibernation Mode

After a configurable period of tool inactivity in the stand (10 min factory default), the tool enters in Hibernation mode. It cuts off power supply making the tip to reach room temperature thus preventing oxidation and saving energy.

Longer Tip life

Tip life increases exponentially by using a lower temperature for a shorter time, as shown in the graph.

JBC tips last 5 times longer than other brands thanks to the Exclusive Heating System and the Intelligent Heat Management: Sleep & Hibernation functions.

Rework components with Dynamic Soldering Profile

JBC Soldering introduces the final solution for reworking thermal shock sensitive components like MLCC capacitors: Dynamic Soldering Profiles for hand soldering tools.

Available for the upcoming new soldering stations range, this new functionality allows using dynamic profiles in order to control the temperature of the component during all the phases of the soldering process (preheating, soak, reflow), in accordance with IPC J-STD-001G Section 4.6, emulating the heating process in a reflow oven.

Now, by combining the new Dynamic Temperature Profile functionality with the most precise JBC rework tools, it is possible to reliably rework MLCC capacitors as small as 008004 and other thermal shock sensitive components individually eliminating the risk of disturbing nearby components.

Along with JBC Net, the first smart system to optimize traceability and resources in hand soldering, JBC soldering makes possible the rework of high-reliability PCBs for industries such as Military, Aerospace, Automotive as well as Medical.

JTSE Hot Air Station

The JBC JTSE-1A is a high powered hot air station for repairing all types of SMDs quickly and safely, including the biggest QFPs and PLCCs.

Profiles mode

There are two work modes to choose from - manual and profile. In manual mode, the operator can set temperature values and air flow rate depending on the task. In profile model, the operator can set up and edit as many as 25 profiles for temperature and airflow.

Manual mode

In manual mode the operator can set temperature values and air flow rate depending on the task.

Profile mode

In this mode the operator can set up or edit as many as 25 profiles of temperature and air flow.

Control thermocouple

Users can read the temperature at a specific point on the PCB with the control thermocouple. This helps protect components or a specific area on the PCB, and provides greater precision when regulating the temperature.

There are two work modes available for use with the control thermocouple:

Regulation: the station regulates the air temperature automatically to maintain the External Thermocouple (TC) temperature.

Protection: the station cuts the air supply off when the External Thermocouple (TC) temperature is reached.