• 4 channel/100 MHz oscilloscope
• Dual channel spectrum analyzer with spectrogram
• 25 MHz arbitrary waveform generator
• Digital multimeter
• Dual channel DC power supply up to 20 V/1 A (not simultaneously)

This instrument is primarily an oscilloscope, but includes the functions of a spectrum analyzer, an arbitrary waveform generator, a digital multimeter, and a DC power supply. Python scripting is also included. The MPO-2000 series is available in Basic and Professional versions (model number suffixes B and P, respectively) as well as 2- and 4-channel configurations. The Basic and Professional versions differ in bandwidth, signal decoding features, USB protocols, and Python scripting features.

The MPO in the product name stands for Multi-function Programmable Oscilloscope.

Several versions of the MPO-2000 series are available. Some of the differences are highlighted in the table below.

Notes:

1. Decoding and triggering

2. Pro version includes GUI library and permits user editing of libraries

3. HID - Human Device Interface (Keyboard, mouse, etc.)

4. Control of other Instek devices

The models in the MPO-2000 lineup differ in their bandwidth, number of channels, and trigger and decoding functions.

Basic Series

• 2 and 4 channel options
• 100 MHz Bandwidth
• I2C/SPI/UART/CAN/LIN serial bus trigger and decoding function
• CAN FD, USB 2.0 (full speed) digital decoding

Professional Series

• Adds the following features to the Basic Series
• 200 MHz Bandwidth
• FlexRay, USB PD, I2S digital decoding

The built-in spectrum analyzer permits you to measure and analyze two frequency domain signals at the same time. The spectrogram function makes it easy to observe the signal’s strength distribution over time.

• Real-time dual-channel spectrum analyzer
• Windows: Hanning, Rectangular, Hamming, Blackman
• Frequency Range: DC - 500 MHz
• Span: 1 kHz - 500 MHz
• Resolution Bandwidth: 1 Hz - 500 kHz

The dual-channel waveform generator can be used to apply a signal to the circuit under test.

• 2 channels
• Sample Rate: 200 MSa/s
• Vertical Resolution: 14 bits
• Maximum Frequency: 25 MHz
• Waveforms: Sine, Square, Pulse, Ramp, DC, Noise, Sinc, Gaussian, Lorentz, Exponential Rise, Exponential Fall, Haversine, Cardiac

The DMM function can be used simultaneously with the DSO function. The DMM function is a basic digital multimeter.

• Reading: 5,000 counts
• Safety: CAT II 600 V rms, CAT III 300 V rms
• DC Voltage Ranges: 50 mV, 500 mV, 5 V, 50 V, 500 V, 1000 V
• DC Current Ranges: 50 mA, 500 mA, 10 A
• AC Voltage Ranges: 50 mV, 500 mV, 5 V, 50 V, 700 V
• AC Current Ranges: 50 mA, 500 mA, 10 A
• Resistance Ranges: 500Ω, 5kΩ, 50kΩ, 500kΩ, 5MΩ
• Diode Test Maximum forward voltage 1.5V, Open voltage 2.8V
• Temperature Range: -50°C - + 1000°C 

The power supply function can supply continuously adjustable DC power output to dual channels with 1 to 20V volts depending on the output current.

• 2 channels
• 1 V to 5 V at 1 Amp
• 5 V to 10 V at 0.5 Amp
• 10 V to 20 V at 0.25 Amp
• Peak Current: 1 A @ 250 ms
• Voltage Step: 0.1 V Continuously Adjustable

The MPO-2000 series can run Python scripts natively (without at PC) so that users can programmatically control an automated test system.

Basic Series

• BJT output characteristic curve
• LC oscillator circuit frequency and temperature characteristic curve
• Fuse endurance test
• LED forward bias characteristic curve
• Barcode scanner measurement application

Professional Series

• Adds the following features to the Basic Series
• Python GUI library
• Package Python scripts into apps
• Additional memory for scripts