• Part number 99-0432
• Add the benefits of Power-Off testing to your current diagnostic test strategy
• Can be used as a standalone unit or connected to a Huntron Access Prober (optional) for full test automation
• Variable range parameters provide hundreds of voltage, source resistance and frequency combinations
• 24 voltages, 16 resistances and 40 frequencies 

The Tracker 3200S is designed to encompass Huntron’s product history and leadership in power-off troubleshooting by providing powerful test solutions.

The Tracker 3200S uses a color, touch screen LCD for control of features such as range configuration, front panel pin selection and Channel A/B settings. The Tracker 3200S LCD provides a very fast screen refresh rate for quick screening of component pins and displays the A and B channel signatures at the same time (A+B mode).

The Tracker 3200S features variable range parameters resulting in hundreds of voltage, source resistance and frequency combinations to precisely fit your needs. Match the circuit impedance by setting the applied voltage, frequency and source resistance.

• 24 voltages: 200mV, 400mV, 600mV, 800mV, 1V to 20V in 1V steps including 10V (Low), 15V (Med 1), 20V (Med 2)
• 16 resistances: 10Ω, 20Ω, 50Ω, 100Ω, 200Ω, 500Ω, 1kΩ, 2kΩ, 5kΩ, 10kΩ, 20kΩ, 50kΩ, 100kΩ, 54Ω (Low)*, 1.2kΩ (Med 1)*, 26.7kΩ (Med 2)* (* Through Huntron Workstation only)
• 40 frequencies: 20Hz to 190Hz in 10Hz steps; 200Hz to 1.9kHz in 100Hz steps; 2kHz to 5kHz in 1kHz steps

Most Tracker users have their preferred range settings and the Tracker 3200S can save four range combinations that you use the most. These can be selected on the touch screen display (buttons 1-4).

The LCD also displays current ranges settings, pulse generator settings, current selected pin, SigAssist calculated values (resistance, capacitance, power, forward and reverse diode breakdown voltages), A vs. B comparison tolerance and Pass/Fail indication.

The Tracker 3200S features two 64 pin IDC connectors (one per channel) where custom cable interfaces can be used to quickly scan PCB connectors as a type of "first pass" test. If signature differences are detected then you can trace the connector pin to the component level saving you troubleshooting time. The two 64 pin connectors can be combined for a total of 128 pins and you have the ability to select any pin to be used as Common. You can also use standard IC clips and cables to easily scan standard ICs and select SOICs.

IC clips that connect through ribbon cables to the scanner connectors on the Tracker 3200S front panel are sold separately. Clips come in different pin counts and spacing with the most common being 0.1" (2.54mm) that fit standard through-hole ICs. SOIC (small outline) clips are also available for clipping onto 50mil lead spaced surface mounted ICs.

To make your own cables you will want the 64 pin IDC ribbon cable connectors that fit the scanner connections. The manufacturer part numbers are 1-1658620-2 (connector socket) and 1-499252-3 (connector strain relief).

Please click here for a detailed drawing showing how to construct your own cables using reading available parts.

The Tracker 3200S is designed to connect to a Huntron Access Prober for full diagnostic automation. BNC connections on the rear panel allow you to easily interface the Huntron Access, Access 2 or Access DH Probers. If you need to test high density, surface mount PCBs, robotic automation is a tremendous time saver.

Please note, Access Prober sold separately.

The Tracker 2800/2800S and the Tracker 3200S are very similar in overall function but their purposes are different.

The Tracker 3200S is designed to be used stand alone or connected to optional automation hardware such as Access Probers. The Tracker 2800/2800S is intended for benchtop use where additional automation is not needed.

The Tracker 3200S includes the Workstation software where it is optional with the Tracker 2800/2800S.

The Tracker 2800/2800s also has a scaled down selection of ranges. The Tracker Model 3200S has the full compliment of ranges available with Huntron Workstation.

The Tracker 3200S can scan up to 128 with selectable common pins where the Tracker 2800S can scan up to 40 pins using a single common.