| Input Specifications |
| Input channels |
16 channels (Each input channel and the HiLogger chassis share common ground) |
| Maximum input voltage |
50 VDC |
| Detection levels |
High = 2.5 V or more, Low = 0 to 1.5 V |
| Input resistance |
1.1 MΩ ± 5% |
| Transfer rate |
Once per recording interval |
| Output Specifications |
| Input type |
No-voltage contact (normally open), open collector or voltage input |
| Output channels |
16 channels
Outputs can be set to correspond to any of the 32 analog input channels, 4 pulse input channels, or one 16-bit digital channel. (Each output channel is isolated from the others and from the HiLogger chassis ground.) |
| Maximum rated voltage to ground (output only) |
30 Vrms AC, 60 VDC (between each output channel and the HiLogger, and between each output channel) |
| Withstand voltage |
350 VAC for 1 minute (between each output channel and the HiLogger, and between each output channel) |
| Output circuit |
Open collector output (active low) |
| Maximum switching capacity |
5 to 60 VDC, 10 mA |
| Output updating |
Once each recording interval |
| General Specifications |
| Compatible models |
HIOKI Memory HiLoggers |
| Operating environment |
Indoors, <2000 m (6562 feet) ASL |
| Operating temperature and humidity |
0 to 40ºC (32 to 104ºF ) at 30 to 80%RH (non-condensating) |
| Storage temperature and humidity |
-10 to 50ºC (14 to 122ºF ) at 30 to 80%RH (non-condensating) |
| Size (without protrusions) |
Approx. 92W 170H 52D mm (3.62"W 6.69"H 2.05"D) |
| Weight |
Approx. 0.3 kg (1.1 oz.) (without battery)
Approx. 0.55 kg (1.9 oz.) (within battery) |
| Accessories |
Instruction Manual |
| Options |
9447 BATTERY PACK
The HiLogger can be powered by installing a supplemental Model 9447 BATTERY PACK (which must be charged in the HiLogger or Hioki 9643 CHARGE STAND). |
| Standards applying |
Determined by specification of the connected Memory HiLogger |