| Special Characteristics: | Measures pulse and supports pulse output from power meters and flux gauges. |
| Measurement Range ? 1 channel each of: | Current Pulse: Detectable Current Range 10mAp-p to 30mAp-p
Pulse Width: More than 12.5msec.
Pulse Interval: More than 25msec. (40Hz max.)
Rise/Fall Speed: Less than 2msec.
(When using Model 9766 Clamp ON Sensor in a less than AC50A/m magnetic field)
Voltage/Contact (non-voltage) Pulse: 4kHz max.
Voltage Pulse:
Counted when voltage level changes from L to H
(L: +0.0 to +0.2V, H: +1.5V to +45V)
(Logic is not defined between +0.2V and +1.5V.)
Contact (non-voltage) Pulse:
Counted when changed from ?Short? to ?Open? between two terminals |
| Filter: | Effective on ?Contact (non-voltage) Pulse? input (Can be set by commands)
For Mechanical Contact:
Pulse Width: More than 20msec.
Pulse Interval: More than 40msec. (Less than 25Hz Frequency)
(No filter available on Current Pulse Input) |
| Measurement Interval Accuracy: | ?2msec. |
| Display Range: | Integrated value on each channel at each interval (16,000,000 max.) |