Type 12 Mild Steel Junction Box; Lift-Off Cover with Screws
Application
- Designed for use as instrument enclosures, electrical junction boxes or terminal wiring enclosures.
- Provides a degree of protection from falling dirt, dust, oil, and water.
Construction
- Formed from 14-gauge steel.
- Smooth, continuously welded seams without knockouts, cutouts, or holes.
- Welded brackets provide for enclosure mounting.
- Lift off cover is secured with captive, plated steel screws and supported on internal hinges except as noted on charts at the bottom and right.
- Cover screws fasten into threaded, sealed wells.
- Oil resistant gaskets are permanently secured.
- A bonding stud is provided on the door and a grounding stud is provided on the enclosure.
Finish
- Cover and enclosure are phosphatized and finished in ANSI 61 gray recoatable powder coating.
Extra Deep Series Comparison Table
| Enclosure |
|
|
| Part No. | H | W | D |
| 1438A¹ | 4.00 | 4.00 | 4.75 |
| 1438B | 6.00 | 4.00 | 4.75 |
| 1438C | 8.00 | 4.00 | 4.75 |
| 1438D | 10.00 | 4.00 | 4.75 |
| 1438F | 7.25 | 6.25 | 4.75 |
| 1438H | 9.50 | 6.25 | 4.75 |
| 1438K | 9.50 | 8.50 | 4.75 |
| 1438O | 11.75 | 8.50 | 4.75 |
| 1438S | 11.75 | 10.75 | 4.75 |
| 1438V | 14.00 | 10.75 | 4.75 |
¹ Not hinged