The Hakko FM-2030 (FM2030-01) Heavy Duty Soldering Iron is the ideal solution where soldering is difficult due to heavy ground planes or high heat sink applications. The Hakko FM2030-01 provides a higher mass tip with double the power of conventional T15 tips.
The FM2030-01 is only compatible with the Hakko FM-203* Soldering Station and Hakko FM-206 High Performance 3-port Rework System (if attached to any other port, a grip error or connector error (C-E) will occur).
High-powered 140W soldering iron with high heat capacity
- Composite-type soldering iron which has an iron tip with a built-in heater.
- Features the versatility to enable the soldering of a variety of components ranging from large scale components such as power supply boards, heat sinks, shield cases and coaxial cables, which require a high amount of heat, to micro components mounted on multilayer boards.
While providing high heat capacity, the grip is thin and easy to hold, exactly as the FM-2027, and provides two design features that protect users' hands from high radiation heat.
![]()
16 types of tips are available(T22 Series)
This lineup enables soldering of components of various sizes ranging from micro to large components.
Working characteristics comparison graph
High-powered soldering iron also contributes to reductions in production time.
![]()
Measurement condition
| Test method | Solder at 5 points and measure the time until temperature of the workipiece reaches 250 degrees. |
| Board used | Bakelite board |
| Component used | Screw |
| Tip shape | Shape-2.4D |
| Temperature setting | 350°C |
| Solder | Lead-free solder (Sn/Ag/Cu) Ø1.0 |
Combined use with HAKKO FM-206 with a large LCD panel
High heat capacity soldering iron intended for exclusive use with the compact multi-rework station, HAKKO FM-206 that enables simultaneous use of three handpieces
To work with this handpiece(HAKKO FM-2030), connect it to the Channel 2 or 3 receptacle on HAKKO FM-206.
![]()