Recommend to a Friend
Hakko 633-01 Iron Holder
3.0
Bought to hold Hakko FR 301 de-soldering tool. The holder works ok with the tool. It would be helpful if it had more weight to it to keep from sliding around when removing the tool and putting it back in place, and especially when using tip cleaning pod. As it is you have to use the other hand to hold it in place. Will look for some way to fasten it to the bench, but would really like to be able to move it from place to place.
Jim Heinzel on
Sep 13, 2022
Recommend to a Friend
Perfect Complement to Desoldering Tool
5.0
When I bought the FR-301 desoldering tool, I decided to bite the bullet and buy the stand to go with it. It works great and it is nice to have the tip cleaner right there where you need it. It is a luxury, but it makes the whole thing easier to use.
FRED TRAVERS on
Sep 29, 2020
Recommend to a Friend
Hakko Products - GOOD STUFF!
5.0
Simple and effective. I purchased this for Hakko FR301 Desoldering tool, but it would work for the majority of soldering irons. The Tip Cleaner works well and is easy to clean.
on
Sep 28, 2020
Recommend to a Friend
Very Useful Holder for Hakko FR-301 TOOL
5.0
This is a good inexpensive holder the Hakko FR-301 TOOL that comes with a tip cleaner : )
Verified Purchase
Allan Trias on
Jul 24, 2020
Recommend to a Friend
Strong and durable
5.0
Bought this for the Hakko FR-301. I was a little worried about the fit but it holds it well and keeps it clean.
Verified Purchase
Kirk on
Jul 16, 2020
Recommend to a Friend
Hakko Iron Holder
5.0
Great accessory to have on a cluttered workspace!
on
Jul 05, 2020
Recommend to a Friend
Sturdy
4.0
Holds the FR-301 solid, no problem.
on
Jun 22, 2020
Recommend to a Friend
Hakko 633-01
5.0
This holder exceed my expectation. After a long while browsing the internet for a holder that would last much longer than a typical clone soldering iron holder from Asia, I have found Hakko 633-01. I was quite reluctant at first, but decided to go ahead with the order. I don't regret making such a decision. Ideally this holder would be a good companion for another Hakko soldering iron. It works very well with other brands as well. I just wish that the holder is not moving as much while placing on a smooth surface. If you are using an SMD anti-static mat, this should not be a concern at all.
I highly recommend this product.
Verified Purchase
Andrew on
Jun 04, 2020
Recommend to a Friend
Hakko Holder
4.0
I would definitely get this if you have the 309 gun, It holds it well. I'm not too crazy about the wire mesh cleaner though, I really don't think it's stiff enough to clean the 309 gun.
Anonymous on
May 28, 2020
Recommend to a Friend
A must have
5.0
This is a must have for the Hakko FR-301! Super solid!! I wish it came in the box with the FR-301 to begin with...
Verified Purchase
Anonymous on
Apr 30, 2020
Recommend to a Friend
Bought as replacement/upgrade
5.0
Bought this to replace an old unknown stand. What a difference!! Iron is held much more securely. Definitely worth purchasing
Kyle Majikas on
Aug 16, 2019
Recommend to a Friend
Hakko 633-01 iron holder with 599B Tip Cleaner
5.0
This iron holder works perfectly on my work bench, well made and should last a long time!
on
Apr 18, 2019
Recommend to a Friend
The best holder I have ever used
5.0
The holder has a heavy base which withstands most of my irons I have and simply the best iron holder I have ever used. Option of tip cleaner sponge is a nice addon.
Verified Purchase
Anonymous on
Apr 12, 2019
Recommend to a Friend
great stand
5.0
I'm really happy with the stand. It takes up little space on my overcrowded workstation. The rubber feet on the bottom hold the stand from sliding around when your cleaning your tip.
nackesww on
Mar 02, 2018
Recommend to a Friend
Good product
4.0
This is a great product with some minor issues.
First, the good. It is sturdy, well constructed with thick steel sheet. The plastic holder (the black round ring at the top) for the iron resists the heat and hasn’t deformed or become damaged due to my clumsy location of the iron in the holder. Finally, it doesn’t tip over. During usage.
Now, the minor issues. The hole where the sponge holder fits is a bit larger than the brass sponge holder; this causes the sponge holder to slid out of the iron holder during transport, and it can become inconvenient during usage due to loosen sponge holder. Can be solved with some tape though. Finally, the base has 4 anti sliding feet, but the iron holder itself is quite light and slides away from position on some occasions. I think this will vary depending on the surface of your workbench; mine is moderately slippery.
BFelectronics on
Jan 05, 2018
Recommend to a Friend
You need a stand for the FR-300
5.0
This stand gets the job done for preventing your Hakko FR-300 from burning or melting anything it might come into contact with while idling on your bench. The integrated tip cleaner is a nice touch, although I wish it fit a little more snugly (it tends to spin around a bit). I got mine as part of the full kit for the FR-300, and I'm glad I have it.
Verified Purchase
Frank Moscowitz on
Jun 02, 2017
Recommend to a Friend
Works
5.0
Other stands might work better or might be cheaper, but I went with the Hakko FR-300 bundle so I effectively got this stand for free. Gets the job done.
Verified Purchase
Anonymous on
Jan 06, 2017
Recommend to a Friend
Holder works
5.0
Using it on the desoldering tool works fine and some times I will grab another soldering iron of another bran and find them to fit as well.
pleased with equipment net
Detimothy on
Sep 20, 2016
Recommend to a Friend
Simple but effective
5.0
Came as a bundle with the Hakko FR-300 vacuum desolder gun. Something of a generic soldering iron stand; could be a bit taller to better fit the FR-300, but still works quite well. Allows my FR-300 to remain on the bench full time instead of living in its carry case.
IDEngineer on
Jul 23, 2016
Recommend to a Friend
Great item
5.0
If you own a Hakko 808 then this is mandatory. I recommend this as a professional with 4 808's
Acorn amplifiers on
Mar 26, 2016
Recommend to a Friend
manger
5.0
That 's the best one found.
ling on
Jan 18, 2016
Recommend to a Friend
Hakko is good stuff
5.0
Bought to upgrade from the Weller sponge type iron holder.
The Hakko has lots of nice little touches, like rubber feet so it doesn't slide around, lots of storage for extra tips and of course the metal type tip cleaner which is vastly better than the wet sponge type, for not cooling the tip and not oxidizing what solder is on the tip.
Verified Purchase
Jeff Weaver on
Jan 13, 2016
Recommend to a Friend
Great Holder! Works well with the FR-300
5.0
Bought this holder to use with the FR-300...Quality construction, strong but still light weight. Would work with almost any iron
Steve on
Oct 28, 2015
No reviews found to display for this rating.