Recommend to a Friend
FR-301 Kit
4.0
I love my FR-301! Wish I had one decades ago! I took one point off as the supplied 633 holder does not fit the 301 very well.
Verified Purchase
Mark A Shaum on
Jan 30, 2023
Recommend to a Friend
Operates extremely well
5.0
Components fall off the board without popping traces on old PCB's. A must have for working on older stereo components
Verified Purchase
Tony on
Jun 24, 2020
Recommend to a Friend
Hakko FR-301
5.0
Planning on doing a lot of re-work of some classic KW hybrids (Ts-820s & Ts-830s), so it was clear I needed a decent desoldering tool: Hakko FR-301. Tequipment has a longstanding reputation for great pricing, stock, and support. My purchase of this unit was no exception! Outside of a complete desoldering station, which would be overkill for my personal application, I am thoroughly pleased with the FR-301. It exceeded my expectations, and is a terrific value for the price. It won't make me a smarter hobbyist bench tech, but the FR-301 will certainly help me prevent damage to the aging Kenwood PCBs.
Have also just recently purchased a Rigol DM-3058E from Tequipment, and am awaiting delivery in two days. I expect another review is in my future.
Thanks Tequipment!
Verified Purchase
Mitch on
Oct 18, 2019
Recommend to a Friend
High Quality
5.0
These tips never fail to impress. Maintained properly they last quite a while.
Verified Purchase
John S on
Jan 14, 2024
Recommend to a Friend
worth every penny
5.0
I struggled with solder wick on certain repairs. So I got some no-name desolder iron from that site named after a river. That one made bad smells when plugged in and did not do a clean job. So I bit the bullet and got the FR301. Wish I bought it years ago. This makes desoldering a fun activity. Not an emotional rollercoaster as with prior methods. It makes repairs mcu faster since I don't spend 15 minutes swearing at my tools and myself afterwards. Only downside is that there is not a light visible from the back end to let you know the status of the device. There is an LED but its on the front bottom, pointing away from you. Also the little metal thing to rest the iron on is a joke.
Calaverasgrande on
Jan 04, 2024
Recommend to a Friend
Soldering Tips
5.0
These are the real thing and would not go anywhere else but TE equipment to buy my hakko parts. Thanks very much for the great service
Tim T. on
Aug 09, 2023
Recommend to a Friend
Hakko Fr-301
5.0
I trust Hakko after the 20 years of service from my Hakko 808. The FR-301 works even better. Looking forward to the next 20 with this one.
Jim Francis on
Apr 10, 2023
Recommend to a Friend
Hakko N61-10 Nozzle
5.0
Good quality, well made nozzle.
Verified Purchase
Cliff on
Jan 12, 2023
Recommend to a Friend
Hakko N61-09 Nozzle
5.0
Good quality, well-made nozle
Verified Purchase
Cliff on
Jan 12, 2023
Recommend to a Friend
Hakko N61-05 Nozzle
5.0
Good quality, well made nozzle.
Verified Purchase
Cliff on
Jan 12, 2023
Recommend to a Friend
Hakko N61-04 Nozzle
5.0
Good quality, well made nozzle.
Verified Purchase
Cliff on
Jan 12, 2023
Recommend to a Friend
Hakko FR-301 Desoldering Tool
5.0
Excellent performance and ease of use, from this high quality, well made Hakko product.
Verified Purchase
Cliff on
Jan 12, 2023
Recommend to a Friend
n61 tip
4.0
works well
Joseph on
Jan 10, 2023
Recommend to a Friend
Hakko FR-301
5.0
I was skeptical at first over the cost - but after receiving the unit and putting it to work it is worth every cent. The unit is very well constructed and performs exactly as expected. I am re-wiring 100 stop action magnets for a pipe organ and this tool cut my time approximately in half. I'm very pleased.
David Pratt on
Nov 25, 2022
Recommend to a Friend
?
5.0
Can't keep enough of them
Edie Vaught on
Nov 11, 2022
Recommend to a Friend
Works Well
5.0
Bought this to have a variety of tip sizes, it works VERY well.
Richard Fort on
Oct 18, 2022
Recommend to a Friend
Works Well
5.0
Bought this to have a variety of tip sizes, it works VERY well.
Richard Fort on
Oct 18, 2022
Recommend to a Friend
Works Well
5.0
Bought this to have different size tips, it works VERY well.
Richard Fort on
Oct 18, 2022
Recommend to a Friend
Works well
5.0
Bought this to have a variety of tips, it works VERY well.
Richard Fort on
Oct 18, 2022
Recommend to a Friend
The Bomb
5.0
This desoldering tool works perfect. I desoldered a 28pin chip and it fell out of the board.
Richard Fort on
Oct 18, 2022
Recommend to a Friend
N61-09 Desoidering tip
5.0
Works as it should makes my repair work go much quicker and easyer
James Johnson on
Sep 13, 2022
Recommend to a Friend
Hakko N61-04 Desoldering Nozzle
5.0
Nozzle is high quality and works as it should. It fits well over the through-hole component leads that it was purchased for, and used with the Hakko FR 301 de-soldering tool does a great job of de-soldering components.
Jim Heinzel on
Sep 13, 2022
Recommend to a Friend
Hakko 633-01 Iron Holder
3.0
Bought to hold Hakko FR 301 de-soldering tool. The holder works ok with the tool. It would be helpful if it had more weight to it to keep from sliding around when removing the tool and putting it back in place, and especially when using tip cleaning pod. As it is you have to use the other hand to hold it in place. Will look for some way to fasten it to the bench, but would really like to be able to move it from place to place.
Jim Heinzel on
Sep 13, 2022
Recommend to a Friend
Top (Desoldering) Gun
5.0
Fast heating. Excellent portability. A breeze to clean. I like not having to be tethered to a separate unit. The quick change shaft is a bonus. I will buy one for my home shop.
Anonymous on
Jun 28, 2022
Recommend to a Friend
Hakko Desoldering Nozzles
5.0
Typical Hakko quality throughout. I bought the 4 nozzle kit to go with my 301 tool. The different sizes included are the most popular used AFAIK. If you use a 301desoldering tool, get this kit.
on
May 03, 2022
Recommend to a Friend
Awesome
5.0
If you have read any good reviews on this gem......believe them. This is one product that exceeds expectations. I was amazed how well this thing removed everything I tried it on. If you are in the market for a desoldering tool this thing is truly a gem!!
David Kelly on
Mar 15, 2022
Recommend to a Friend
Works like you would expect
5.0
I expected the most from this product. After using my technician's desoldering tool with great results, I decided to get my own. Yep! Unless you have three hands, this tool is the best thing you can purchase to get a component desoldered. I've been doing it the hard way for years (retired) but now I've got the right tool and its a breeze! Just remember to release the clamp force on the vacuum collection chamber and dumpit out before you store the tool away. That way the gaskets remain fresh for the next time you use it. Be conservatve on the temperature setting. Burning off a pad is too easy.
on
Oct 23, 2021
I got a lemon
1.0
Unit died 3 months later, after extremely light use and proper maintenance.
I would have to send it from CR to US for fixing. No further help provided
Had to replace the main PCB not available in HakkoUSA and just to be sure a new heating element from a 3rd party.
The good thing is you can find parts, (hakko USA item is backordered.)
The bad thing is that I got a lemon and that I had to pay for it… I will stay away from hakko products for sure from now on.
is backordered.)
The bad thing is that I got a lemon and that I had to pay for it… I will stay away from hakko products for sure
Verified Purchase
Anonymous on
Oct 19, 2021
Recommend to a Friend
No more solder wicks... A must have desoldering tool
5.0
A great tool for the serious electronics service technician. It saves lots of time by making a fast and clean desoldering of through-hole components off of PC boards.
Anonymous on
Sep 21, 2021
Recommend to a Friend
Excelent tool.
5.0
I work on vintage audio gear, this remove solder quickly, with out damaging pads.
I love it
Verified Purchase
Anonymous on
Aug 02, 2021
Recommend to a Friend
Believe the hype!
5.0
This gun is outstanding! Follow the instructions on usage and it works lie a charm. Huge time saver. Thanks TEquipment for having it at a great price!
Verified Purchase
John W Sweeney on
Jul 25, 2021
Recommend to a Friend
Tip Variety a Must
5.0
Hakko has a great solder vacuum system and do make sure they stay efficient requires a good set of tips for different solder types of solder joints. I ordered plenty of tips to make sure my Hakko FR-301 runs efficiently.
CaseyO on
Jul 10, 2021
Recommend to a Friend
Outstanding product
5.0
The FR-301 is the best desoldering gun in this class. The suction pressure could not be compares with those clone products, strong pressure almost could not miss every shot. Even the gun kit and tips' prices more expensive but the outcome could not be compare or PCB damaged.
Eric Wong on
Jun 27, 2021
Recommend to a Friend
Outstanding!
5.0
Awesome tool, works beyond expectations.
Quick, good vacuum, and easy to clean.
TEquipment is my first choice for all equipment needs.
Verified Purchase
Douglas Sherwood on
May 24, 2021
Recommend to a Friend
Hakko 0.8 tip
5.0
Increasingly essential for tightly populated PCBs
Anonymous on
May 15, 2021
Recommend to a Friend
Exactly what I need
5.0
Great product, great store and sellers perfect combination. Thanks TEquipment!!
Aaron Cantu on
Apr 22, 2021
Recommend to a Friend
Great product
5.0
Great product, great store and sellers perfect combination. Thanks TEquipment!!
Aaron Cantu on
Apr 22, 2021
Recommend to a Friend
Works excellent
5.0
trying to desolder mechanical keyboard switches without one is so time consuming and dangerous if you are not skilled. This tool pays for itself after a few uses
Only way to fly on
Apr 01, 2021
Recommend to a Friend
Works Great
5.0
Very Nice
on
Mar 31, 2021
Recommend to a Friend
Way way better than alternatives
5.0
Having used the copper desolder approach and suction approach, this thing is so so much faster, easier and better to use. I do say get a few different sized tips to cover your bases on what you would desolder.. but it really works well. Most of the time.. one suck per solder joint, and the component comes off.
Anonymous on
Mar 18, 2021
Recommend to a Friend
la qualitée au rendez-vous
5.0
j'ai acheté ces embouts de fer à dessouder dernièrement et je suis entièrement satisfait
Anonymous on
Mar 12, 2021
Recommend to a Friend
Best Thing Since Shirt Pockets
5.0
I use this on old point to point radios so it does need cleaning more frequently than SMT components but that's ok. It works and works well.
I missed this thing all my life and didn't know it. I love it.
Anonymous on
Mar 12, 2021
Recommend to a Friend
Hakko FR-301 Desoldering Tool
5.0
It is possible to remove solder with a manual de-soldering pump and solder wick, but there is nothing like the speed and ease of the Hakko FR-301 Desoldering Tool. The only downside is the cost. After looking at some cheaper knock-offs of the Hakko product, I decided the money was well-spent on the Hakko. Once you use this tool, you'll never go back to a manual pump.
on
Feb 15, 2021
Recommend to a Friend
A fun tool to use!
5.0
This solder sucker makes removing a component fun and quick. Easy to use, component safe, gets all the solder even on double-sided PCB's!
on
Feb 12, 2021
Recommend to a Friend
Awesome - should have bought it years ago
5.0
I hated having to desolder something with a solder sucker (I think I was the sucker...) and/or desoldering braid. Using this thing is so easy. Heat it up, put it over the pin and when the solder melts pull the trigger. My Scottish heritage made me have doubts about the value for dollar. Boy was it wrong. This thing is worth every penny. I spent more than 30 minutes removing one of 3 pots on aboard with a "good" solder sucker and braid. So I gave up and put that board aside. I then ordered this and to try it out for giggles more than anything, I took this desoldering gun to the other two. I was done in a couple minutes - cleaner, faster, no damage and without headache.
Verified Purchase
Robert Porter on
Feb 10, 2021
Recommend to a Friend
Good Stuff
4.0
Hot-Swap/Quick Change feature is a time saver.
Verified Purchase
Anonymous on
Jan 27, 2021
Recommend to a Friend
Good Stuff
4.0
Hot-Swap/Quick Change feature is a time saver.
Verified Purchase
Anonymous on
Jan 27, 2021
Recommend to a Friend
Good Stuff
4.0
Hot-Swap/Quick Change feature is a time saver.
Verified Purchase
Anonymous on
Jan 27, 2021
Recommend to a Friend
Does the job
4.0
Hot-Swap/Quick Change feature is a time saver.
Verified Purchase
Anonymous on
Jan 27, 2021
Recommend to a Friend
Handy Dandy
4.0
Great for removing solder and extracting components safely.
Verified Purchase
Anonymous on
Jan 27, 2021
Recommend to a Friend
Good tool
5.0
Just used my new Hako FR-301 today , I am working on vacuum tube equipment, the Hako works very well removing large amount of solder on tube socket tabs. Haven't had time to try it on PCB yet but I'm sure it will work well there also.
Verified Purchase
Davide on
Jan 07, 2021
Recommend to a Friend
Original Hakko at great price
5.0
You will not find a more competitive price than this one. Fast shipping and wonderful customer service.
Verified Purchase
Ali Kattan on
Dec 11, 2020
Recommend to a Friend
Just Perfect
5.0
These are the original Hakko nozzles. The price is much more convenient than any other seller, fast shipping and excellent customer service (really, I mean it)
Verified Purchase
Ali Kattan on
Dec 11, 2020
Recommend to a Friend
Just Perfect
5.0
These are the original Hakko nozzles at a lower price in comparison to other sellers. Fast shipping and excellent customer service.
Perfect on
Dec 11, 2020
Recommend to a Friend
Halko FR-301
5.0
I’m really pleased with this desoldering tool. Desolders perfectly so the component can be removed easily. So much better than my vacuum sucker - no comparison.
on
Nov 27, 2020
Recommend to a Friend
Hakko FR-301 Desolder Tool
5.0
Best tool for desoldering you will find. Heats up fast and desolders fast and clean. Highly Recommended.
Hakko FR-301 on
Nov 23, 2020
Recommend to a Friend
Great tool at a reasonable price
5.0
I am retired electronics design engineer and my hobbies include ham radio which involved, in some cases, building and repairing new fangled electronics (i.e. SMD and thru hole digital and analog pc bds). It became quite apparent that my old tools (e.g. soldering iron, solder sucker) were just not up to the task. So I indulged in the purchase of the Hakko FR-301 desoldering tool. Expensive for a hobbyist? Yes but worth every cent.
Anonymous on
Nov 16, 2020
Recommend to a Friend
Hakko FR-301 makes desoledring easy
5.0
I repair vintage computers and hardware that have a lot of through-hole components. This has made it a dream. Projects that took hours using solder wick now take minutes. Well worth the investment. Got mine at a great price at TEquipment. Cheaper than Amazon.
Douglas Finn on
Nov 05, 2020
Recommend to a Friend
Excellent tool
5.0
Several years ago I bought a Hakko 808 desoldering gun and was reasonably happy with it. For a couple years now it's been getting less effective so I thought I'd try the 301. Huge difference! The 301 works almost instantaneously and if this one breaks, is stolen, or is otherwise gone from my bench, I'm buying a new one immediately. What a great tool.
Thomas Gruning on
Nov 05, 2020
Recommend to a Friend
Such a nice kit!
5.0
Great, complect. A nice durable product, easy to replace. I'm very happy with this purchase.
Verified Purchase
ivo kunchev on
Oct 13, 2020
Recommend to a Friend
Hakko FR-301
5.0
I think I was wasting all my time using a lot of different desoldering tools. At the moment I start to work with this great too I become the happiest man with an electronics hobby! Hakko does an excellent job. Just a pleasure to use this desoldering gun equipped with great powerful pump!! Highly recommend it!!
Verified Purchase
ivo kunchev on
Oct 12, 2020
Recommend to a Friend
Better than Expected Vacuum
5.0
Good vacuum for self contained unit. Nice case as well.
Anonymous on
Oct 03, 2020
Recommend to a Friend
Hakko FR-301
5.0
Great tool. Works fantastic. Wish I would have gotten one years ago.
John M Philip on
Sep 30, 2020
Recommend to a Friend
Perfect Complement to Desoldering Tool
5.0
When I bought the FR-301 desoldering tool, I decided to bite the bullet and buy the stand to go with it. It works great and it is nice to have the tip cleaner right there where you need it. It is a luxury, but it makes the whole thing easier to use.
FRED TRAVERS on
Sep 29, 2020
Recommend to a Friend
Hakko Products - GOOD STUFF!
5.0
Simple and effective. I purchased this for Hakko FR301 Desoldering tool, but it would work for the majority of soldering irons. The Tip Cleaner works well and is easy to clean.
on
Sep 28, 2020
Recommend to a Friend
Great Tool
5.0
I decided to buy the whole kit with all the tips when I bought my Hakko FR-301 desoldering tool. I'm glad I did so that I have everything I need. The tool works so well that it is a real keeper and having all the tip sizes makes it even more versatile.
FRED TRAVERS on
Sep 21, 2020
Recommend to a Friend
Great Tool
5.0
I decided to buy the whole kit with all the tips when I bought my Hakko FR-301 desoldering tool. I'm glad I did so that I have everything I need. The tool works so well that it is a real keeper and having all the tip sizes makes it even more versatile.
FRED TRAVERS on
Sep 21, 2020
Recommend to a Friend
Great Tool
5.0
I decided to buy the whole kit with all the tips when I bought my Hakko FR-301 desoldering tool. I'm glad I did so that I have everything I need. The tool works so well that it is a real keeper and having all the tip sizes makes it even more versatile.
FRED TRAVERS on
Sep 21, 2020
Recommend to a Friend
Great Tool
5.0
I decided to buy the whole kit with all the tips when I bought my Hakko FR-301 desoldering tool. I'm glad I did so that I have everything I need. The tool works so well that it is a real keeper and having all the tip sizes makes it even more versatile.
FRED TRAVERS on
Sep 21, 2020
Recommend to a Friend
Great Tool
5.0
The reviews were good on this desoldering tool so I expected it to work, but it surpassed my expectations. It makes desoldering fun instead of frustrating. It works just like you would expect. The tip works like a soldering iron with a hole in the middle - you hold it on the pin you want to desolder until the solder melts, then pull the trigger and it sucks all the solder off instantly. This tool is a real keeper. I considered buying one of the cheap ones from another vendor, but after using the Hakko, I'm glad I paid for a real professional tool. It pays to spend a little more when something really works like it should. I highly recommend it. I bought the kit with all the tips and the stand and I'm glad I got everything so I'll have what I need.
FRED TRAVERS on
Sep 21, 2020
Recommend to a Friend
Good tool, reasonable shipping cost
5.0
Good tool, fast shipment, correct voltage for US/Canada.
Art on
Sep 18, 2020
Recommend to a Friend
Amazing Tool!
5.0
Very well build & easy to maintain.
I give it 5 STARS well deserved :)
Verified Purchase
Downhillsyl on
Sep 14, 2020
Recommend to a Friend
The right sized tip for the right job
4.0
I had some large lugs to remove from a PCB, and the regular tip was too small. This tip was perfect for the job. The picture suggests the finish/quality of the tip is lacking, but when I received the tip, it was the same (good) quality as the rest of the FR-301 I was using. Highly recommend this..
Hakko Trip N61-10 on
Aug 31, 2020
Recommend to a Friend
Well worth the investment
4.0
I bought this tool to desolder some components from multi-layer PCBs where I was finding my other spring-solder suckers were not working well..
This tool is really good for that. Its almost makes it fun to do desoldering. It safely removed my micro-switches and other components from my multi-level PCBs with NO Damage. And it was fairly quick to remote these components — those I did get the occasional lead that required me to reflow solder into the eyelet, and then desolder again. But even so — it did a super job doing this.
It has four heat settings. I had to used setting 4 for the multi-layer PCBs. I also removed quite a number of burned out LEDs from a single layer PCB. Setting 1 was adequate for this. This was where it was really “fun” to desolder, as it only took about two seconds per leaded to de-solder, and quite literally the LEDs DROPPED from the PCB after I desolder red them, and the resulting PCB pads remained in MINT condition. I was really impressed.
I didn’t find the unit got too hot too hold, and it was lightweight, and comfortable to hold.
The only thing I would suggest to people considering buying this, is to make sure you buy one of Hakko’s drill cleaning bits when you get this unit. The poker that comes with it will not always clean the desoldering tube and it might become totally clogged. However if you have the cleaning drill, it is relatively easy to clear up solder that might be blocking the tube.
Over all, I would highly rate this.. I wish I had purchased this years ago. It would have made it so much easier for me!
Hakko FR-301 is a great tool for desoldering! on
Aug 31, 2020
Recommend to a Friend
Hakko FR301 Kit 2
5.0
Purchased from TEquipment, and shipped for free: 'FR301 Kit 2' which includes the Hakko de-soldering gun, 4 de-solder tips of various sizes, 633-01 Iron stand and a few cleaning tools. Several years ago, I purchased the Hakko FX-951 Soldering station that I am extremely happy with. Based on the quality of FX-951, I felt their de-soldering gun, FR301, would be the obvious choice. Hakko FR301 has exceeded my expectations for a self-contained de-soldering tool - hands down beats manual bulb and plunger style solder suckers.
Verified Purchase
Paul on
Aug 26, 2020
Recommend to a Friend
The right tool for the job
5.0
If you have ever had to de-solder anything, you know how much fun it can be with sub-standard tools. This tool makes the job almost like magic! It works really well, just make sure you have a few tip sizes to choose from.
Anonymous on
Aug 24, 2020
Recommend to a Friend
Hakko N61-10
5.0
Works perfectly.
Anonymous on
Aug 14, 2020
Recommend to a Friend
Hakko N61-05
5.0
Works perfectly
Anonymous on
Aug 14, 2020
Recommend to a Friend
Hakko N61-04
5.0
Works perfectly.
Anonymous on
Aug 14, 2020
Recommend to a Friend
Get it! its worth every penny and will save you from so much frustration!
5.0
ive been using the classic 20 dollar bulb suction de soldering iron for years. that thing was a hit and miss i would often damage traces trying to get chips off with it. after breaking a few game consoles over the years i finally took that piece of crap and tossed it and broke down to get this.
this desoldering gun is night and day difference i cant recommend it enough!!! don't waste your time with the cheap alternatives! this just work 100% of the time its also much faster than the cheap methods. the time it takes me to remove a chip is cut in half and it comes off with out breaking traces and no flux required either! clean up is a breeze too!
Just get it! You wont be disappointed!
Verified Purchase
Dave on
Aug 05, 2020
Recommend to a Friend
Professional use
5.0
In 40 years of PCB repair, Haako products get the best results. Clog less and can get parts as needed. Even soldered removal technique instructions are included with the unit.
on
Aug 03, 2020
Recommend to a Friend
Very Useful Holder for Hakko FR-301 TOOL
5.0
This is a good inexpensive holder the Hakko FR-301 TOOL that comes with a tip cleaner : )
Verified Purchase
Allan Trias on
Jul 24, 2020
Recommend to a Friend
Worth the Extra $
5.0
Great tool. Well built with convenient features like an on/off button on the handle, and a temperature dial. Makes the less expensive brand/model I bought (that's being repaired) look amateurish. TE shipped it quick and had a good price.
Verified Purchase
Juan Calvillo on
Jul 20, 2020
Recommend to a Friend
I can’t recommend this enough
5.0
I was tired of using a soldering sucker and soldering wick, so I started looking at desoldering guns. I wasn’t sure if I wanted to go with Hakko or the cheap China knock off, but I am glad I went with the Hakko. This is a quick desoldering gun that will make your life so much easier,
Verified Purchase
Kirk on
Jul 16, 2020
Recommend to a Friend
Strong and durable
5.0
Bought this for the Hakko FR-301. I was a little worried about the fit but it holds it well and keeps it clean.
Verified Purchase
Kirk on
Jul 16, 2020
Recommend to a Friend
Works well
5.0
It works well and I like its compact size. I have an old Pace solder sucker and vacuum pump that works well but is just too big and bulky. It takes up way too much room on my bench. This is so much nicer.
on
Jul 12, 2020
Recommend to a Friend
Fantastic tool
5.0
I realized I was using a sucker pump for almost 30 years, so It got to be better tool for it. Here it is. This desoldering tool is so easy to use, works very well, easy to clean. I do the 3 hours job in 15 minutes with it, and without overheating the components. A real game changer for me.
Verified Purchase
Brice on
Jul 07, 2020
Recommend to a Friend
Hakko FR-301
5.0
I've used a Hakko soldering station for years so I know and trust the brand but I always used a solder sucker for de-soldering. A tool like the Hakko FR-301 just seemed like an extravagance but I finally decided to spring for one. It's so much faster, cleaner and easier on your circuit board I'm really sorry I waited so long. There are Chinese knock-offs of this but they just don't work well, get the real thing.
on
Jul 05, 2020
Recommend to a Friend
Hakko Iron Holder
5.0
Great accessory to have on a cluttered workspace!
on
Jul 05, 2020
Recommend to a Friend
Much Better Desoldering Tool
5.0
The Hakko FR-301 is much better desoldering tool than using the old manual method especially if you are working with multiple projects in a day. Very clean results, easy to use and maintain. I ordered 2 other tips for thicker wires and heavier solder removal. No issues so far after a month of usage. Highly recommended.
Verified Purchase
Allan on
Jun 27, 2020
Recommend to a Friend
Sturdy
4.0
Holds the FR-301 solid, no problem.
on
Jun 22, 2020
Recommend to a Friend
The best I've used
5.0
Much better than previous desoldering stations I've owned, and is by far the least expensive. Very powerful, nice complete removal. Extremely easy to clean.
on
Jun 22, 2020
Recommend to a Friend
Hakko FR-301
5.0
This device was recommended to me by another tech. I have had other auto desoldering tools but this one is far superior. Works like a charm, doesn't clog and keeps the work moving. Highly recommended.
Verified Purchase
Daniel A Lurie on
Jun 17, 2020
Recommend to a Friend
Hakko FR-301 pays for itself
5.0
This is my 2nd Hakko FR-301. My first was from Japan, but I recommend sticking with a US version, if you're in the States. It's also important to use the correct nozzle for the job, ensure it stays clear of solder clogs, and is generally used properly.
Verified Purchase
Erich Moraga on
Jun 11, 2020
Recommend to a Friend
Great tip, and a great price.
5.0
The nozzle that came with my Hakko FR-301 was slightly too big, and would hit adjacent SMD components, etc., whereas this nozzle easily clears them.
Verified Purchase
Better than the Hakko FR-301's included nozzle for small stuff. on
Jun 11, 2020
Recommend to a Friend
Hakko 633-01
5.0
This holder exceed my expectation. After a long while browsing the internet for a holder that would last much longer than a typical clone soldering iron holder from Asia, I have found Hakko 633-01. I was quite reluctant at first, but decided to go ahead with the order. I don't regret making such a decision. Ideally this holder would be a good companion for another Hakko soldering iron. It works very well with other brands as well. I just wish that the holder is not moving as much while placing on a smooth surface. If you are using an SMD anti-static mat, this should not be a concern at all.
I highly recommend this product.
Verified Purchase
Andrew on
Jun 04, 2020
Recommend to a Friend
Hakko Holder
4.0
I would definitely get this if you have the 309 gun, It holds it well. I'm not too crazy about the wire mesh cleaner though, I really don't think it's stiff enough to clean the 309 gun.
Anonymous on
May 28, 2020
Recommend to a Friend
Hakko FR-301
5.0
Seems like a well built tool..It works very well..After using it I would be very sad to have to go back to the old bulb and braid technique.
Verified Purchase
kris nauman on
May 13, 2020
Recommend to a Friend
Hakko FR-301 - Great tool
5.0
I replaced my heavily used older model Hakko desoldering tool with the FR-301. I have used it to desolder point to point solder joints in a tube amp and to desolder IC pins on a switch mode power supply board. It performed flawlessly. I really like the new style filter/ pre-filter setup.
Verified Purchase
Michael L Lloyd on
May 06, 2020
Recommend to a Friend
A must have
5.0
This is a must have for the Hakko FR-301! Super solid!! I wish it came in the box with the FR-301 to begin with...
Verified Purchase
Anonymous on
Apr 30, 2020
Recommend to a Friend
Cannot go wrong with Hakko
5.0
Solid tool for a honest price! This is a small enthusiast tool, but it is more than capable for small shops or home DIY projects. Besides, it is still a Hakko... So you know you'll get a quality tool and a warranty you can count on.
Verified Purchase
Anonymous on
Apr 30, 2020
Recommend to a Friend
Highly Recommended Desoldering Tool
5.0
If you have ever watched someone use a manual desolder pump and soldering iron you know the pains of desoldering. Besides the snail like pace, broken pads and traces occur with frequency, especially on older boards. I recently picked this one up and have already desoldered multiple ICs and components with ease on vintage boards. Just remember to use the included cleaning rods if you notice its not pulling up the solder or the end looks sealed.
Verified Purchase
Anonymous on
Apr 24, 2020
Recommend to a Friend
Fantastic product, highly recommended!
5.0
Project would have been a headache to complete without this handy tool. Great stuff!
Verified Purchase
Anonymous on
Apr 19, 2020
Recommend to a Friend
Sucks in a Good way
5.0
This item sucks exactly how it was described. Saves us time and components.
on
Apr 06, 2020
Recommend to a Friend
Hakko desoldering tool
5.0
Like all other Hakko products that own, this one is no different. Hakko products always exceed my expectations, and meet my highest standards of excellence. In addition, Hakko offers a broad range of accessories to handle all situations.
Anonymous on
Apr 05, 2020
Recommend to a Friend
Quality Product
5.0
Great accessory to a Professional product.
Windlord on
Apr 02, 2020
Recommend to a Friend
Quality Product
5.0
Great accessory to a Professional product.
Windlord on
Apr 02, 2020
Recommend to a Friend
Professional Quality
5.0
Excellent professional quality tool. Unit comes with a storage case and options for a wide variety of tips. Tip changes are made with a very effective accessory tool and cleaning the chamber is intuitive and easy. The tips need to be stamped for better identification. A minor inconvenience. The vacuum is strong and the adjustable heat settings are more than adequate for most all projects. The included tip stand functions with the tool laying on the bench. Not as convenient and takes up precious bench space. The addition of the Hakko 633-02 can be incorporated for holding the tool in the vertical position for storage. A well made solid feeling tool.
I like it!
Windlord on
Mar 27, 2020
Recommend to a Friend
Quality Product
5.0
The De-soldering tool performs above expectations. Powerful suction and adjustable heat. The additional tips available make the tool extremely versatile. The only suggestion is the lack of recognizable size markings on the tips. The tool performs marvelously with a flexibility of settings that challenge your imagination for the 'perfect" settings/tip for each situation that arises. The cost and quality of the instrument puts it in the professional tool category. The deluxe setup includes the 633-02 Stand to store the tool upright instead of using the (included) tip rest with the tool lying down.
I like it!
Windlord on
Mar 27, 2020
Recommend to a Friend
Excellent functionality - best price on the Internet
5.0
The Hakko FR-301 is a very well made desoldering tool for sure. It's virtually fool proof to use. Saves time and components. I wish I would have known about this device sooner! Well worth the price.
Verified Purchase
John A Justin on
Feb 20, 2020
Recommend to a Friend
De-soldering tool an excellent addition to my tools
5.0
This is my first de-soldering tool. I researched many de-soldering tools before making my purchase and even though this tool had great reviews I was still skeptical. Now that I have used it for a while I can`t imagine being without it. It very easily and cleanly pulls up the solder and cleaning the collection chamber is fairly easy too. I also love that it is not another a big box sitting on my bench. I haven`t tried an extended length tip but I suspect they will work well. Overall I really cannot complain about any aspect of this tool. I am VERY happy with my purchase.
Works BETTER than expected! on
Feb 13, 2020
Recommend to a Friend
Very good tool.
5.0
Makes short work of desoldering. Even wire wrapped terminals are easy to remove.
Guy Arnold on
Feb 10, 2020
Recommend to a Friend
Hakko professional grade equipment.
5.0
After using the old plunger de-soldering pump and solder wick, I found the Hakko FR-301 and accessories. I haven't looked back since. Its quick, easy and safely removes electronic components. Worth every penny.
Mike L. New to electronics repair. on
Jan 21, 2020
Recommend to a Friend
Better than I expected
5.0
I went to trade school for electronics repair a couple decades ago. We learned to use solder wick and cheap solder suckers. I've been using those for years. I knew these desoldering irons existed but I thought the solder wick was fine (it does help that I have a nice JBC iron). Well I saw this in use on Youtube channel Mr Carlson's Lab and I decided to give it a try and WOW! I've used it to repair several items. I replaced some high current relays yesterday and I put this to power 3 out of 5 and I don't even think I needed to turn it up that much. It melted that stuff like butter. The vacuum function works really well.
The only other desoldering iron I have owned in the past was a Radio Shack one many years ago that cost somewhere between $25 and $50 and that was totally useless. I can't compare this product to any other actual decent products.
But for the price I doubt other brands would stack up.
I do recommend getting a better stand. I don't really enjoy laying the iron on its side with the "stand" (more like tip protector) it comes with. But it does more or less work.
Verified Purchase
Dan D on
Jan 09, 2020
Recommend to a Friend
Hakko is the best
5.0
Long lasting, very effective. They get it right better than anyone
Verified Purchase
Many Moons Audio on
Dec 09, 2019
Recommend to a Friend
Perfect tool for reworking through hole PCBs and power supplies
5.0
This tool is a game changer. Successfully removed 40 pin DIPs which literally fell out of the PCB after unsoldering and large snap-in caps on power supplies without damaging the PCB. Heats up very quickly and has plenty of power to heat large ground planes to melt solder. Strong vacuum pulls the solder out in one trigger click. Easy to clean too. Well worth the investment!!
Anonymous on
Nov 21, 2019
Recommend to a Friend
Initial results positive
5.0
I've just used the FR-301 a bit after receiving it. It worked great on the single sided board I need to fix immediately. Solder was completely removed and part fell out of the board. Will report back when I've had more experience...
Initial use is fantastic on
Sep 26, 2019
Recommend to a Friend
Bought as replacement/upgrade
5.0
Bought this to replace an old unknown stand. What a difference!! Iron is held much more securely. Definitely worth purchasing
Kyle Majikas on
Aug 16, 2019
Recommend to a Friend
It works.
5.0
Works well with the FR-301. Good price.
Verified Purchase
LLOYD on
Aug 12, 2019
Recommend to a Friend
nozzle size
3.0
FR301 is a great tools for de soldering, I wish they have a much bigger size of nozzle use for IGBT power pack terminals and for relay terminals.
Verified Purchase
Noel Declaro on
Jul 15, 2019
Recommend to a Friend
HakkoFR 301
5.0
Recently while in NYC decided to buy a Hakko FR301 replaciny my accidentally broken FR300, i am not going to say much but this Hakko devices really do well all you expect them to do.They are a handy affordable charm and for sure will save you lot of effort and PCBs.5??????????
Verified Purchase
nelson baez on
Jul 10, 2019
Recommend to a Friend
WELL WORTH THE PRICE
5.0
I f your wondering if you can afford this the answer is YES.Works well, de-solders quickly. Components fall out depending on the woirk. Makes having to de solder anything a fun project. Clean up is straight forward. It has worked well for me. Your mileage may vary.
1966 on
Jun 28, 2019
Recommend to a Friend
Well worth the price.
5.0
As an amateur who is getting into board repair and retro gaming reproduction, this desoldering gun makes crazy fast work of stripping down PCBs. It's well worth the price in terms of how long it would take to strip a board of its components with regular methods.
Verified Purchase
Jose Guerra on
Jun 08, 2019
Recommend to a Friend
Should have bought a long time ago!
5.0
Excellent tool! I always hated desoldering components because of the chance of overheating parts and pcb traces. This tool works like magic.
Verified Purchase
Andrea Lini on
May 26, 2019
Recommend to a Friend
Hakko 633-01 iron holder with 599B Tip Cleaner
5.0
This iron holder works perfectly on my work bench, well made and should last a long time!
on
Apr 18, 2019
Recommend to a Friend
Hakko FR-301 Desoldering Tool
5.0
Very good quality, and works great. Fits my business perfectly. Was also impressed with how quickly it arrived! Highly recommend this device!
truefret on
Apr 18, 2019
Recommend to a Friend
The best holder I have ever used
5.0
The holder has a heavy base which withstands most of my irons I have and simply the best iron holder I have ever used. Option of tip cleaner sponge is a nice addon.
Verified Purchase
Anonymous on
Apr 12, 2019
Recommend to a Friend
A must have tool
5.0
I used to hate desoldering so bad and this tool makes really makes it easy. Very easy to use and heats up quick. The pump removes all solder with no problem at all. Easy to take apart and clean. I can kick myself for not buying this a long time ago.
Verified Purchase
Bill on
Mar 10, 2019
Recommend to a Friend
HAKKO FR-301 DESOLDERING TOOL
5.0
I just wish I had this desoldering tool years ago, it works great. I have used it on through hole circuit boards and also de-soldering hand wired old tube radio circuits. I can't believe how clean it will leave a tube socket terminal that you can then just untwist the wires.
Verified Purchase
Richard Nagel on
Mar 09, 2019
Recommend to a Friend
Works great
5.0
Desoldering is the job I dread most. This tool makes desoldering easy.
Verified Purchase
T. Gatlin on
Mar 05, 2019
Recommend to a Friend
New and improved? Ayuh
5.0
I have been the proud owner of the Hakko 808 for several years. It was time to get this new design. I am happy so far, an easy five stars.
Verified Purchase
Michael Higgins on
Feb 19, 2019
Recommend to a Friend
Great tool
5.0
I wish I would have bought a desoldering tool like this 10 years ago. Solder wick is such a pain, and those manual suction tools suck -- not in a good way. I removed a dozen components from a board with ease using this tool in like two minutes. It's almost magic.
Verified Purchase
Jason Baker on
Feb 05, 2019
Recommend to a Friend
FR-301 - excellent tool w/one easy-to-fix issue
5.0
I used my new Hakko FR-301 desoldering gun for the first time yesterday. I was very pleased with the performance of the gun. It is comfortable to use and does a really good job of cleaning out via holes, leaving through-hole component leads free to drop out.
To save their tips from oxidizing and making them difficult to wet with solder, I typically turn irons off while doing other operations until I am ready to use them again. The FR-301 comes up to temperature quickly which facilitates this.
The only complaint I have with the unit is that the power-on indicator light is on the wrong side of the handle. The indicator on the FR-301 is not visible when the gun is parked in its stand. It would be better to have the indicator visible from any vantage point at any angle, or at the very least somewhere on the back, like perhaps on or around the power switch itself. As it is now, you have to remove the unit from the stand and turn it around to veiw the indicator. It could be brighter too. Presently, it is rather dim and difficult to see. The FR-301 is, otherwise, an excellent tool.
You may want to pass this information on to the manufacturer.
Thanx, G. Knoedl
Verified Purchase
George Knoedl on
Jan 31, 2019
Recommend to a Friend
Amazing
5.0
I love this little thing. It's pretty amazing to unsolder headers and have them just come loose. It's a game changer!
Verified Purchase
Anonymous on
Jan 29, 2019
Recommend to a Friend
A wonderful addition to our bench!
5.0
The HAKKO FR-301 was recommended by a seasoned professional tech. This rugged instrument is saving valuable bench time bringing back to life our vintage arcade machines.
Verified Purchase
Bruce Manning on
Jan 17, 2019
Recommend to a Friend
Hakko FR-301
5.0
This Desolder Tool was highly recommended by a seasoned circuit pro. I was pleased with its ruggedness and ease of use. I would suggest purchasing at least 4 additional tips in order to be ready for any project.
Verified Purchase
Bruce Manning on
Jan 14, 2019
Recommend to a Friend
Excellent!
5.0
This desoldering iron is great! Make a job that took a few minutes take seconds now! No issues with it getting stuck-up with solder or anything.
Verified Purchase
Beth N on
Dec 19, 2018
Recommend to a Friend
Good tips, Good price
5.0
After my venerable Pace desolder station died, I needed an inexpensive and reliable desolder unit! Purchased the Hakko FR301 but it only comes with the 1.0mm tip. Purchased this 1.6mm tip from Tequipment (who has the best price by the way) to desolder larger terminal like large capacitors. This Hakko FR301 is an awesome unit but word of caution, start with the lowest setting first!! I burned a few pads at first because level 3 was definitely to hot!!!
Verified Purchase
mark nowak on
Dec 01, 2018
Recommend to a Friend
Best desolder tips
5.0
After many years of using Pace desolder stations my old unit dies and needed an inexpensive replacement fast, so purchased the Hakko FR-301 and N61 tips from tequipment.net! The Hakko outperforms my old Pace unit and at half the cost! Hakko is the way to go!!!
mnow on
Nov 30, 2018
Recommend to a Friend
FR-301
5.0
I used a solder sucker one time and new that it was something I did not want to continue. Almost every review I read the person said they should have bought a de-soldering tool years ago. I took that advice and am happy I did. This thing works like a champ. I have little to compare it to but it works great and makes life much easy.
Raven on
Nov 22, 2018
Recommend to a Friend
Excellent !!!!
5.0
All it was touted to be and more, outstanding design and superior performance.
Just regret not having purchased this outstanding soldering tool sooner !!!!
Great VALUE !!!!
Robert Chartier on
Nov 06, 2018
Recommend to a Friend
Easy to use, best repair tool ever
5.0
I wish I'd bought one of these years ago. Even if you only do occasional repair work, this is vastly superior to the two-handed iron and solder-sucker arrangement. Avoiding damage to even one circuit board pays for the tool.
Verified Purchase
Brian Dunham on
Oct 04, 2018
Recommend to a Friend
Perfect!
5.0
Don't hesitate. It performs its function perfectly. Follow the directions. The included tip is probably fine for most jobs.
Verified Purchase
JFM on
Sep 30, 2018
Recommend to a Friend
Hakko FR-301 - Great quality
5.0
Very well built. Heats up quickly and did a great job desoldering components from single and multi layer boards.
Verified Purchase
Jeff Hecht on
Sep 29, 2018
Recommend to a Friend
Works Great
5.0
I've been using solder wick and manual solder extracting devices for 40 years. I've been thinking about the Hakko FR-301 for several years wondering if I spent this much money would it be a tool or a toy. Just got it yesterday and it is definitely a tool that I hope to use for years ahead. Very happy with my purchase.
Charles G. on
Sep 20, 2018
Recommend to a Friend
FR-301
5.0
Heats fast, recovers fast, sufficient vacuum. Nozzles interchange quickly and easily. The tool is well made and operates simply. A good value
Brett on
Aug 13, 2018
Recommend to a Friend
Can't be beat for the price
5.0
Works great on everything I have desoldered so far. Excellent heat retention/regeneration. No waiting for reheating for rapid use. The solder filter tank are easily removed for cleaning. I did also buy the nozzle kit but have only used the included 1.0mm nozzle to date.
The Hakko 633-01 stand is recommended versus the little metal "stand" that comes with the unit.
Verified Purchase
Lee Strickland on
Jul 11, 2018
Recommend to a Friend
Very useful repair tool
5.0
The fastest and easiest way to effectively desolder through hole components without causing damage to the PCB. Even though the tool is not too expensive it comes from a solid name brand and will last for many years.
Jason on
Jul 09, 2018
Recommend to a Friend
our line voltage is 230 , 60 Hz.
5.0
What would I tell Tequipment the I.D. Number of Hakko FR 301 that is 230v ac, 60/50 Hz,which is our line voltage ? Thank you.
Anonymous on
Jul 09, 2018
Recommend to a Friend
Hakko FR-301 Desoldering Tool
5.0
This is one great tool. Remove solder in seconds. Cleaning after use is simple too.
Verified Purchase
Kenneth Jarvis on
Jul 05, 2018
Recommend to a Friend
1.6 mm nozzle
5.0
This nozzle is good for large snap-in capacitor pins or other large components.
Verified Purchase
Kenneth Jarvis on
Jul 05, 2018
Recommend to a Friend
1.3 mm desoldering nozzle
5.0
This nozzle will desolder most anything the 1 mm can't get around.
Verified Purchase
Kenneth Jarvis on
Jul 05, 2018
Recommend to a Friend
Great general use nozzle
5.0
This 1 mm nozzle will work with most desoldering needs.
Verified Purchase
Kenneth Jarvis on
Jul 05, 2018
Recommend to a Friend
Desoldering nozzle
5.0
This tip works well with small diameter leads.
Verified Purchase
Kenneth Jarvis on
Jul 05, 2018
Recommend to a Friend
Hakko
5.0
I love this product Wanted one for years
Verified Purchase
Anonymous on
Jul 04, 2018
Recommend to a Friend
Wonderful tool
5.0
Title says it all...works much better than my (tired) old desoldering station. Fast and effective, my only complaint is possibly that they should create a more comprehensive kit with a wider selection of nozzles included. If you're even remotely considering the purchase of this, go ahead and do it--you won't regret it.
Verified Purchase
Mike Maiville on
Jun 13, 2018
Recommend to a Friend
Great product for removing solder
5.0
I am very pleased with the unit. Appears to be build very well and easy to maintain and keep in top condition. I wish I had purchased one of these sooner. It does a great job of removing solder and greatly shortens the repair time.
William on
Jun 01, 2018
Recommend to a Friend
Great time saver!
5.0
This was my first jump to a specialized desoldering tool, and it has saved a great amount of time. Desoldering through hole is a breeze with this tool. It heats the area quickly and extracts the solder cleanly without clogging.
Verified Purchase
Lucas Wells on
May 30, 2018
Recommend to a Friend
An absolute must-have!
5.0
Works very well. Not sure if this is a significant performance increase over the previous model--I never used an FR-300--but this was money well spent.
Verified Purchase
Mike Maiville on
May 30, 2018
Recommend to a Friend
Great Product
5.0
I have used a lot of solder removal tools and this is by far the best for most situations. Greatly speeded repairs. I am using as hobby to repair electronic equipment and radios.
Verified Purchase
WJS on
May 08, 2018
Recommend to a Friend
Good to have an assortment of tips
5.0
This size works well for tiny pins and wires.
Verified Purchase
Nick on
May 06, 2018
Recommend to a Friend
Good to have an assortment of tips
5.0
This size and the 1 mm seem about right for the majority of through hole components.
Verified Purchase
Nick on
May 06, 2018
Recommend to a Friend
Good to have an assortment of tips
5.0
Good for relatively large component pins
Verified Purchase
Nick on
May 06, 2018
Recommend to a Friend
I would definitely buy from them again.
5.0
I really felt at home doing business with TEquipment. The first thing I noticed is that they are easy to contact for questions about purchases. They answered the phone quickly (2 times!) and were both knowledgeable and helpful about my concerns. It also made me feel comfortable knowing they are a real brick and mortar business located in the great USA. Their prices are competitive if not the best, offering free shipping many times and no tax for those out of state. What else could I ask for besides maybe my pipe and slippers.
Verified Purchase
Michael Hanzy on
May 03, 2018
Recommend to a Friend
Great tool, great value
5.0
I was dreading a large through-hole desoldering project (dozens of 4-legged switches to remove) because I don't get a lot of time to work on my hobby. I purchased the FR-301 after I heard that it was an improvement on the FR-300, which I was on the fence about purchasing because of some less-than-stellar reviews.
This is a fabulous tool for getting a lot done in a short amount of time. A good analogy is that your manual vacuum pump and solder wick are a cordless drill and your task is to remove all the deck screws from a deck. This desoldering tool is like an impact driver. Zip, zip, zip and you're done.
Highly recommended if you're more than a casual hobbyist.
Verified Purchase
Brooklyn David on
Apr 16, 2018
Recommend to a Friend
great stand
5.0
I'm really happy with the stand. It takes up little space on my overcrowded workstation. The rubber feet on the bottom hold the stand from sliding around when your cleaning your tip.
nackesww on
Mar 02, 2018
Recommend to a Friend
Good product
4.0
This is a great product with some minor issues.
First, the good. It is sturdy, well constructed with thick steel sheet. The plastic holder (the black round ring at the top) for the iron resists the heat and hasn’t deformed or become damaged due to my clumsy location of the iron in the holder. Finally, it doesn’t tip over. During usage.
Now, the minor issues. The hole where the sponge holder fits is a bit larger than the brass sponge holder; this causes the sponge holder to slid out of the iron holder during transport, and it can become inconvenient during usage due to loosen sponge holder. Can be solved with some tape though. Finally, the base has 4 anti sliding feet, but the iron holder itself is quite light and slides away from position on some occasions. I think this will vary depending on the surface of your workbench; mine is moderately slippery.
BFelectronics on
Jan 05, 2018
Recommend to a Friend
You need a stand for the FR-300
5.0
This stand gets the job done for preventing your Hakko FR-300 from burning or melting anything it might come into contact with while idling on your bench. The integrated tip cleaner is a nice touch, although I wish it fit a little more snugly (it tends to spin around a bit). I got mine as part of the full kit for the FR-300, and I'm glad I have it.
Verified Purchase
Frank Moscowitz on
Jun 02, 2017
Recommend to a Friend
Works
5.0
Other stands might work better or might be cheaper, but I went with the Hakko FR-300 bundle so I effectively got this stand for free. Gets the job done.
Verified Purchase
Anonymous on
Jan 06, 2017
Recommend to a Friend
Holder works
5.0
Using it on the desoldering tool works fine and some times I will grab another soldering iron of another bran and find them to fit as well.
pleased with equipment net
Detimothy on
Sep 20, 2016
Recommend to a Friend
Simple but effective
5.0
Came as a bundle with the Hakko FR-300 vacuum desolder gun. Something of a generic soldering iron stand; could be a bit taller to better fit the FR-300, but still works quite well. Allows my FR-300 to remain on the bench full time instead of living in its carry case.
IDEngineer on
Jul 23, 2016
Recommend to a Friend
Great item
5.0
If you own a Hakko 808 then this is mandatory. I recommend this as a professional with 4 808's
Acorn amplifiers on
Mar 26, 2016
Recommend to a Friend
manger
5.0
That 's the best one found.
ling on
Jan 18, 2016
Recommend to a Friend
Hakko is good stuff
5.0
Bought to upgrade from the Weller sponge type iron holder.
The Hakko has lots of nice little touches, like rubber feet so it doesn't slide around, lots of storage for extra tips and of course the metal type tip cleaner which is vastly better than the wet sponge type, for not cooling the tip and not oxidizing what solder is on the tip.
Verified Purchase
Jeff Weaver on
Jan 13, 2016
Recommend to a Friend
Great Holder! Works well with the FR-300
5.0
Bought this holder to use with the FR-300...Quality construction, strong but still light weight. Would work with almost any iron
Steve on
Oct 28, 2015
No reviews found to display for this rating.