Recommend to a Friend
Hakko 611-2
5.0
Product works great. Good purchase.
Natalie Fike on
Aug 25, 2023
Recommend to a Friend
The standard solder spool holder
5.0
Since I started soldering for work and later for hobby use, the dual spool Hakko solder stand has been the standard holder that I use frequently and recommend to others. It holds both leaded type 1lb solder (Kester) with some space on both ends, and the lead free (Indium SAC305) larger spools without free space. Assembly is required as the side panels and base come flat in a box with spindles and wire guides handle. You'll need a long #2 Philips screwdriver so that the angle is mostly vertical; a stubby won't work well. I use larger diameter solder on the bottom and smaller on top because larger is harder to bend and have never had a problem with sliding or tipping while pulling. There is a small screw on the back of the base if you need to connect to an ESD workstation. I have two of these now; hope that helps you decide.
Verified Purchase
RK on
Jun 26, 2023
Recommend to a Friend
Good quality!
5.0
Nice weight to it. I use it for my 34awg and 40awg wire
Verified Purchase
Jason V on
Feb 25, 2021
Recommend to a Friend
Solidly constructed
5.0
I was looking for something to hang solder on and took a gamble on this. I was actually expecting it to be this good.
Metal is thick, the plates are very heavy duty and will likely outlast the owner for its intended purpose.
Comes with everything you need except solder.
Anonymous on
Feb 12, 2021
Recommend to a Friend
I love these
5.0
A little secret between you and I, these work well for small solid core wire as well.
Verified Purchase
JB on
Dec 24, 2020
Recommend to a Friend
Very useful in small workbenches
5.0
Small footprint to save space on your bench and heavy enough not move around when you pull the solder wire. Ability to keep to different wire gauges is an added bonus. Highly recommended!
Verified Purchase
Anonymous on
Apr 30, 2020
Recommend to a Friend
Hobbyist
5.0
Well made and would recommend to all amateurs and professional electronic enthusiast.
David on
May 24, 2018
Recommend to a Friend
Another Hakko Tool That Simply Works Well
5.0
The looped wire guide swings easily and keeps the solder paying out from its reel reliably, preventing it from jumping onto the spool axle and replacing spools couldn't be easier. This tool is one more Hakko product that makes me stick with this vendor and know I won't be disappointed.
Verified Purchase
Peter Soper on
Apr 24, 2018
Recommend to a Friend
Good quality
5.0
Very good quality for the price, low foot print on the bench.
Not moving with rubber on the bottom.
Ground nut available for installation if needed!
Verified Purchase
Tomer Granit on
Mar 14, 2018
Recommend to a Friend
Hakko 611-2 Dual Solder Stand
5.0
Bench space. NEVER enough bench space. This little gem of a solder stand went a long way toward cleaning my bench. So much so that I'll be ordering a few more. For now, I took the two different sizes of solder I use most often & loaded them in the stand which took less than 5 minutes to assemble. If I'm soldering a piece of equipment in another area I take it there. No unraveled spools cluttering my world and, best of all, I can always find it!
nph on
Jan 10, 2016
Recommend to a Friend
Hakko 611-2 Dual Reel Stand
5.0
Great stand. Feels sturdy and won't move when you pull the solder. I use two different types of solder, 0.45mm and 0.8mm. Helps me keep my work bench organised. When i'm ready to solder I just pull the solder I want , cut it with pliers and done!
Verified Purchase
Kamel Kafati on
Nov 25, 2015
Recommend to a Friend
Hakko solder stand
5.0
Solidly built dual stand. Works great when pulling different solders from the three reels (two small reels on the bottom) for a layout. Love it.
Verified Purchase
Jerry Sweeney on
Aug 30, 2014
No reviews found to display for this rating.