HT Instruments - SOLAR300N (USA)

• SOLAR300N - USA
• New touchscreen interface
• Verification of the efficiency of the photovoltaic system
• Power quality Analysis with voltage Fast Transient (5µs) measurement
• InRush Currents measurement
• Measures and record the electrical absorption of all the equipment connected to the main power supply

Multifunction device for verification of single-phase and three-phase pv system efficiency and Power Quality analysis

SOLAR300N tests the efficiency of a  single-phase and three-phase photovoltaic systems. For this kind of tests, it is necessary to guarantee simultaneity between power measurements carried out at the inverter and irradiation and temperature measurements carried out on the photovoltaic panels. HT Italia has solve this problem by creating a remote measuring device SOLAR02 which acquires the values of solar Irradiation [W/m2], panel Temperature [°C] and environmental Temperature [°C] and transfers them onto SOLAR300N, which inserts them onto the same string of power measurements an then elaborates them with the simultaneity required by the law in force.

At the end of calculation, the indication of a positive or negative result of testing appears on the display of SOLAR300N. Beside measuring and logging the efficiency of PV systems, SOLAR300N is also a powerful power quality analyzer to perform analysis according to EN50160 (harmonics, voltage anomalies, flicker, voltage unbalance, etc.). While used as a power quality analyzer, flexible clamps HTFLEX33e can be used, while in PV analyzing flexible clamps cannot be used.

Single/Three-Phase Inverter Efficiency

SOLAR300N is capable to analyze the DC side and the AC Side at the same time. Based on the specifications of your PV Plant, Irradiance, and Module temperature, SOLAR300N after few minutes of data recording, will give you an outcome OK or NOT OK of your Inverter Efficiency.

Harmonics

• Up to 64th in Real Time
• Up to 49th in recording
• Harmonics summary pages
• Values available in Tables or Graphs

Waveforms

• All voltage and current waveforms
• Waveforms summary page
• Numerical Values always available

Energy and Power analysis

• Active, Reactive and Apparent Power/Energy
• Power Peak time related
• Accurate Analysis at all times

InRush Currents

• On Board analysis
• Date, Duration and Values on each measure
• Min and Max Values always available

Dips, Swells(10ms) and Fast Transients(5µs)

• Max or Min values
• Time and length indication
• Type of Anomalies (Up or Down)

Recording Settings

With check-box menu, setting the parameters of your recordings will be fast and easy. Always on the screen there is the duration of the recording according to setted parameters and the remaining memory.

EN50160 Compliance Analysis

As standard recording preset there is a EN50160 Compliance Analysis that you can use to verify all the parameters with it's limits required by the regulation. You will get an outcome PASS/FAIL on each recording.