• Catalog number 52087820 (UPC NO. 783310048015)
• G10 TUGGER with Mobile VersiBoom including 2-1/2”, 3” and 4” adapters
• Force indicator displays force to help prevent damage to puller and cable
• Right-angle sheave keeps operators out of direct line of pulls
• New specialized dual-speed motor allows for faster pulls up to 10,000 lbs.

The Greenlee G10 Tugger Portable Cable Puller is intended to be used to pull cable through conduit and in tray. The G10 Tugger will develop 44.5 kN (10,000 lb) of pulling force. Refer to a Greenlee catalog for sheaves, pulling rope, and other cable pulling accessories to create an entire cable pulling system.

No single manual can provide instructions for every possible cable pulling application; this manual contains general information necessary to accomplish cable pulls setup with the boom mount, floor mount and chain mount. This tool should only be operated by appropriately trained professionals.

• Allows for faster pulls up to 10,000 lb
• High Speed - 22.4 ft/min (6.8 m/min)
• Low Speed - 13.5 ft/min (4.1 m/min)

• Display force during the pull in increments of 1,000 lb. preventing damage to puller and cable
• Continuous - 0 lb. to 8,000 lb. (0 kN to 28.9 kN)
• Momentary - 8,000 lb. to 10,000 lb. (35.6 kN to 44.5 kN)

• To select high or low speed, as well as to start and stop the pull